ABORT_CONTROLLER_FRU_FAILED
ShortDescription : The system could not cancel the process of replacing a component.
LongDescription: The system could not cancel the process of replacing a component. Try again, and if the trouble persists, contact Customer Support.
Comment: The system could not cancel the process of replacing a component.

ACCEPTABLE_VERSIONS_COMMAND_FAILED
ShortDescription : The non-disruptive update of the Controller software failed.
LongDescription: The non-disruptive update of the Controller software failed. Try the update again.
Comment: The non-disruptive update of the Controller software failed.

ACCOUNT_DISABLED_TEMPORARILY
ShortDescription : The account has been disabled temporarily due to failed login attempts.
LongDescription: The account has been disabled temporarily due to failed login attempts.
Comment: The account has been disabled temporarily due to failed login attempts.

ACCOUNT_HAS_NO_EMAIL_ADDRESS
ShortDescription : The account has no email address.
LongDescription: The account has no email address.
Comment: The account has no email address.

ACCOUNT_NOT_FOUND
ShortDescription : The account was not found.
LongDescription: The account was not found.
Comment: The account was not found.

ADD_LIST_INVALID_ITEM_NUMBER
ShortDescription : The item to add has an invalid list position
LongDescription: The item to add has an invalid list position.
Comment: This error is intended for use by the CSI add(name,value) method to report an invalid position (for example, 0) for a list position specifier.

ADD_LIST_MISSING_ITEM_NUMBER_END_CHAR
ShortDescription : The list of items to add is missing an end char ']'
LongDescription: The list of items to add is missing an end char ']'.
Comment: This error is intended for use by the CSI add(name,value) method to report a missing ']' character for a list position specifier.

ADD_LIST_MISSING_PATH_SEPARATOR_CHAR
ShortDescription : The list of items to add is missing a path separator character
LongDescription: The list of items to add is missing a path separator character.
Comment: This error is intended for use by the CSI add(name,value) method to report a missing path separator character following the ']' character for a list position specifier.

ADD_LOG_BUNDLE_FAILED
ShortDescription : The addition of a bundle to Pilot persistence failed.
LongDescription: The addition of a bundle to Pilot persistence failed.
Comment: The addition of a log bundle failed.

ADMIN_CANNOT_MODIFY_PARAM_ON_APM_HOST
ShortDescription : An invalid SAN Host modification request was specified.
LongDescription: A parameter was specified in the Modify San Host for an FSPM-created host that is not modifiable by an administrator. An administrator is only permitted to modify the LUN Settings on an FSPM-created SAN Host.
Comment: An invalid SAN Host Modification request was specified.

ADMIN_MODIFY_HOST_CANNOT_SPECIFY_APM_HOST_INITIATOR
ShortDescription : The host cannot be modified because the initiator resides in a host created with an FSPM driver.
LongDescription: The host cannot be modified because the initiator resides in a host created with an FSPM driver. If the FSPM driver is no longer installed on the host, delete the host and retry your request. Otherwise, check the initiator list specified in modification request.
Comment: The host cannot be modified because the initiator resides in a host created with an FSPM driver.

ALLOCATION_INFO_INCOMPLETE
ShortDescription : The system capacity and allocation cannot be determined.
LongDescription: The system capacity and allocation cannot be determined.
Comment: Some Enclosure LUNs in allocation information were not yet ready to report status.

ALLOCATION_INFO_RELOAD_ALREADY_IN_PROGRESS
ShortDescription : The system is in the process of reloading allocation information.
LongDescription: The system is in the process of reloading allocation information. Wait a few seconds and try your request again.
Comment: The system is in the process of reloading allocation information.

ALLOCMAN_CACHE_INCONSISTENT_WITH_SYSTEM
ShortDescription : The Allocation Manager's cache is inconsistent with the system's cache.
LongDescription: The Allocation Manager's cache is inconsistent with the system's cache.
Comment: The Allocation Manager's cache is inconsistent with the system's cache.

ALLOCMAN_FRAGMENTED
ShortDescription : The volume cannot be resized.
LongDescription: The volume cannot be resized because of storage pool fragmentation. Please retry with a smaller size.
Comment: The volume cannot be resized.

ALLOCMAN_ILLEGAL_PARAMETER
ShortDescription : The system was unable to create or modify a volume due to an illegal parameter in the request.
LongDescription: The system was unable to create or modify a volume due to an illegal parameter in the request. Try again.
Comment: Allocation Manager encountered an illegal parameter in the request.

ALLOCMAN_ILLEGAL_STATE_ERROR
ShortDescription : Allocation Manager encountered an illegal state while performing a request.
LongDescription: Allocation Manager encountered an illegal state while performing a request.
Comment: Allocation Manager encountered an illegal state while performing a request.

ALLOCMAN_NO_CLEAN_SPACE
ShortDescription : The Allocation Manager cannot find enough storage space to create or modify the volume capacity.
LongDescription: The Allocation Manager cannot find enough storage space to create or modify the volume capacity. Wait until previously used space becomes available and try again.
Comment: The Allocation Manager cannot find enough conditioned Enclosure capacity for the allocation request.

ALLOCMAN_NO_SPACE
ShortDescription : The Allocation Manager cannot find enough storage space to create or modify the volume capacity.
LongDescription: The Allocation Manager cannot find enough storage space to create or modify the volume capacity.
Comment: The Allocation Manager cannot find enough Enclosure capacity for allocation request.

ALLOCMAN_STORAGE_CLASS_NOT_ENOUGH_LUNS
ShortDescription : Only a single LUN is found in the storage class. Double redundancy is not supported.
LongDescription: Only a single LUN is found in the storage class. Double redundancy is not supported.
Comment: Only a single LUN is found in the storage class. Double redundancy is not supported.

ALL_EVENTS_MUST_BE_CLIENT_VISIBLE
ShortDescription : All subscribed events must be visible to the client.
LongDescription: When creating or modifying an email subscription, the events specified in the event type filter must be visible to the client.
Comment: All subscribed events must be visible to the client.

ALL_PROXY_SETTINGS_MUST_BE_CONFIGURED_WHEN_PROXY_ENABLED
ShortDescription : All proxy settings must be specified when enabling the Call-Home proxy server.
LongDescription: When modifying the Oracle destination server Call-Home settings and setting the proxy server enabled flag to true, all proxy server settings must be specified.
Comment: All proxy settings must be specified when enabling the Call-Home proxy server.

ALL_TIERS_MUST_BE_IN_ONE_CHAIN
ShortDescription : All tiers must be in one chain.
LongDescription: All tiers must be in one chain. There cannot be any tiers that are not in the single chain.
Comment: All tiers must be in one chain.

ALREADY_ACTIVE
ShortDescription : The specified clone is already active.
LongDescription: The specified clone is already active.
Comment: The clone is already active.

ANOTHER_FILESERVER_IS_ALREDY_ENABLED_FOR_ANTIVIRUS_SCAN
ShortDescription : Only one file server can be enabled for virus scan at a time.
LongDescription: Only one file server can be enabled for virus scan at a time.
Comment: Only one file server can be enabled for virus scan at a time.

ANTIVIRUS_AGENT_THREAD_LIMIT_EXCEEDED
ShortDescription : The anti-virus agent threads limits exceeded.
LongDescription: The anti-virus agent threads limits exceeded.
Comment: The anti-virus agent thread limits exceeded.

ANTIVIRUS_SERVER_LIMIT_EXCEEDED
ShortDescription : The anti-virus server limit exceeded.
LongDescription: The anti-virus server limit exceeded.
Comment: The anti-virus server limit exceeded.

ANTIVIRUS_SERVER_PROTOCOL_INVALID
ShortDescription : The anti-virus server protocol is invalid.
LongDescription: The anti-virus server protocol is invalid.
Comment: The anti-virus server protocol is invalid.

ANTIVIRUS_SERVER_SCAN_ACTION_INVALID
ShortDescription : The anti-virus server scan action is invalid.
LongDescription: The anti-virus server scan action is invalid.
Comment: The anti-virus server scan action is invalid.

ANTIVIRUS_SCAN_OPTIONS_NOT_SET
ShortDescription : The anti-virus server scan options are not set.
LongDescription: The anti-virus server scan options are not set.
Comment: The anti-virus server scan options are not set.

ANTIVIRUS_SERVICE_NOT_CONFIGURED
ShortDescription : The anti-virus service is not configured.
LongDescription: The anti-virus service is not configured.
Comment: The anti-virus service is not configured.

ANTIVIRUS_IP_ADDESS_NOT_AVAILABLE_IN_CACHE
ShortDescription : The anti-virus IP address in not available in cache.
LongDescription: The anti-virus IP address in not available in cache.
Comment: The anti-virus IP address in not available in cache.

APM_INCORRECT_CONNECTION_PROTOCOL
ShortDescription : The FSPM driver did not use the correct connection protocol.
LongDescription: The FSPM driver did not use the correct connection protocol.
Comment: The FSPM driver did not follow the prescribed connection protocol.

APM_NOT_LOGGED_IN
ShortDescription : The FSPM driver is not logged in; therefore, the request cannot be executed.
LongDescription: The FSPM driver is not currently logged in; therefore, the request cannot be executed.
Comment: The FSPM driver is not logged in; therefore, the request cannot be executed.

ASYNC_REMOTE_SOURCE_TARGET_LICENSE_REQUIRED
ShortDescription : This request requires an Asynchronous Source/Target Remote license.
LongDescription: This request requires an Asynchronous Source/Target Remote license. Install the required license.
Comment: This request requires an Asynchronous Source/Target Remote license.

ASYNC_REMOTE_SYNC_REMOTEASYNC_REMOTE_SOURCE_TARGET_SYNC_REMOTE__SOURCE_TARGET_LICENSE_REQUIRED
ShortDescription : This request requires an Asynchronous or Synchronous Remote license.
LongDescription: This request requires an Asynchronous or Synchronous Remote license. Install the required license.
Comment: This request requires an Asynchronous or Synchronous Remote license.

AUDIT_CANNOT_BE_DISABLED
ShortDescription : A SecureWORMfs cannot disable auditing once it has been enabled.
LongDescription: A SecureWORMfs cannot disable auditing once it has been enabled.
Comment: A SecureWORMfs cannot disable auditing once it has been enabled.

AUTO_TIER_TO_SINGLE_TIER_CONVERSION_IN_PROGRESS
ShortDescription : An auto-tier to single-tier conversion is in progress.
LongDescription: An auto-tier to single-tier conversion is in progress. Try again later.
Comment: An auto-tier to single-tier conversion is in progress.

BLOCK_SNAPSHOT_DOES_NOT_EXIST
ShortDescription : The block snapshot does not exist.
LongDescription: The block snapshot does not exist.
Comment: The block snapshot does not exist.

BOOT_MODE_MISMATCH
ShortDescription : There is a boot mode mismatch between the Controllers.
LongDescription: There is a boot mode mismatch between the Controllers. Contact Customer Support.
Comment: There is a a boot mode mismatch between the Controllers.

BOTH_CONTROLLERS_DEAD
ShortDescription : Both Controllers are not responding.
LongDescription: Both Controllers are not responding. Verify that each chassis is powered up.
Comment: Both Controllers are not responding.

BS_PMI_TOO_MANY_FULL_BLOCK_SNAPSHOTS
ShortDescription : Too many attached volume copies.
LongDescription: Too many attached volume copies. Please wait for background copies to complete before creating more. The limit is 12.
Comment: Too many attached volume copies.

BS_PMI_TOO_MANY_SNAPSHOTS_IN_TREE
ShortDescription : Too many clones in tree.
LongDescription: Too many clones in tree. The limit is 1024.
Comment: Too many clones in tree.

BS_SC_FAILOVER_INCOMPLETE
ShortDescription : Controller failover incomplete.
LongDescription: Controller failover incomplete.
Comment: Controller failover incomplete.

BS_SC_FAILOVER_BLOCKED_BY_LOST_DATA
ShortDescription : Controller failover blocked by lost data.
LongDescription: Controller failover blocked by lost data.
Comment: Controller failover blocked by lost data.

ENCLOSURE_ACCEPT_FAILED_NOT_RECONCILED
ShortDescription : The system cannot accept an additional Enclosure.
LongDescription: The internal state of the Enclosure does not allow the system to accept the Enclosure at this time. Contact Customer Support.
Comment: The system cannot accept additional Enclosures when the restricted Enclosure license is in place and there is no extended Enclosure license.

ENCLOSURE_ALREADY_IN_STORAGE_DOMAIN
ShortDescription : The system cannot assign an Enclosure to a Storage Domain if it is already configured in a Storage Domain.
LongDescription: The system cannot assign an Enclosure to a Storage Domain if it is already configured in a Storage Domain.
Comment: The system is attempting to assign an Enclosure to a Storage Domain that is already configured in a Storage Domain.

ENCLOSURE_COMMAND_RETURNED_FAILURE
ShortDescription : The Enclosure command returned an error.
LongDescription: An Enclosure command (SRB) was received by an Enclosure, but a failure code was returned.
Comment: An Enclosure command (SRB) was accepted by PI/FM, but a failure code was returned.

ENCLOSURE_COMMAND_SEND_REJECTED
ShortDescription : The Enclosure command was rejected.
LongDescription: An Enclosure command (SRB) was rejected before being sent to an Enclosure.
Comment: An Enclosure command (SRB) was rejected before being sent to the Enclosure (by PI/FM?).

ENCLOSURE_CONSOLE_SESSION_DOES_NOT_EXIST
ShortDescription : The Enclosure console session does not exist.
LongDescription: The Enclosure console session does not exist.
Comment: The Enclosure console session does not exist.

ENCLOSURE_CONTROLLER_DDUMP_DOWNLOAD_ALREADY_IN_PROGRESS
ShortDescription : An Enclosure Controller DDUMP download is already in progress.
LongDescription: An Enclosure Controller DDUMP download is already in progress. Only one download is allowed at a time.
Comment: An Enclosure Controller DDUMP download is already in progress.

ENCLOSURE_CONTROLLER_NOT_REACHABLE
ShortDescription : The specified Enclosure RAID controller cannot be reached from the Controller.
LongDescription: The specified Enclosure RAID controller cannot be reached from the Controller.
Comment: The specified Enclosure RAID controller cannot be reached from the Controller.

ENCLOSURE_DISRUPTIVE_UPDATE_FAILED
ShortDescription : The disruptive update of Enclosures failed.
LongDescription: The disruptive update of Enclosures failed. Try the update again.
Comment: The disruptive update of Enclosures failed.

ENCLOSURE_DOES_NOT_EXIST
ShortDescription : The Enclosure cannot be found.
LongDescription: The Enclosure cannot be found. Check the status of the Enclosure.
Comment: The Enclosure does not exist.

ENCLOSURE_DRIVE_ACCEPT_FAILED
ShortDescription : The Enclosure drive accept operation failed.
LongDescription: The Enclosure drive was not in the proper state to be accepted into the system.
Comment: The state of the specified Enclosure drive is not valid for the requested accept operation.

ENCLOSURE_DRIVE_NOT_AVAILABLE
ShortDescription : The Enclosure drive is not available.
LongDescription: The Enclosure drive is not available.
Comment: The specified drive is not available based on drive status.

ENCLOSURE_FWUP_ALREADY_IN_PROGRESS
ShortDescription : An Enclosure firmware update was already in progress.
LongDescription: An Enclosure firmware update was already in progress. Try again. If the problem persists, contact Customer Support.
Comment: A RAID firmware udpate was already in progress. This command was rejected, but waited until the "locking" task completed to return.

ENCLOSURE_FWUP_DOWNLOAD_RETURNED_FAILURE
ShortDescription : An Enclosure firmware update process failed.
LongDescription: An Enclosure firmware update process failed because the download SCSI operation returned an error. Try again. If the problem persists, contact Customer Support.
Comment: A download SCSI operation returned an error.

ENCLOSURE_FWUP_FAILURE_SENDING_DOWNLOAD
ShortDescription : An Enclosure firmware update process failed.
LongDescription: An Enclosure firmware update process failed because the download SCSI operation was rejected. Try again. If the problem persists, contact Oracle Technical Support.
Comment: A download SCSI operation was rejected.

ENCLOSURE_FWUP_FAILURE_SENDING_RESET
ShortDescription : An Enclosure firmware update process failed.
LongDescription: An Enclosure firmware update process failed because the reset SCSI operation was rejected. Try again. If the problem persists, contact Customer Support.
Comment: A reset SCSI operation was rejected

ENCLOSURE_FWUP_INVALID_ENCLOSURE_TYPE
ShortDescription : An Enclosure firmware update process failed.
LongDescription: An Enclosure firmware update process encountered an invalid Enclosure type and cannot complete. Try again. If the problem persists, contact Customer Support.
Comment: An Enclosure with an invalid type was specified in the Enclosure firmware update request.

ENCLOSURE_FWUP_INVALID_FIRMWARE_TYPE
ShortDescription : An Enclosure firmware update process failed.
LongDescription: An Enclosure firmware update process encountered an invalid firmware type and cannot complete. Try again. If the problem persists, contact Customer Support.
Comment: An invalid firmware type was specified in the Enclosure firmware update request.

ENCLOSURE_FWUP_INVALID_SAVED_STEP
ShortDescription : An Enclosure firmware update process failed.
LongDescription: An Enclosure firmware update process encountered an invalid saved state and cannot complete. Try again. If the problem persists, contact Customer Support.
Comment: The saved state for the Enclosure firmware update task is not valid for this task.

ENCLOSURE_FWUP_NO_CTLRS_DISCOVERED
ShortDescription : An Enclosure firmware update process failed.
LongDescription: An Enclosure firmware update process cannot locate any of the specified RAID controllers. Try again. If the problem persists, contact Customer Support.
Comment: None of the specified RAID controllers in the update request were discovered.

ENCLOSURE_FWUP_RESET_RETURNED_FAILURE
ShortDescription : An Enclosure firmware update process failed.
LongDescription: An Enclosure firmware update process failed because the reset SCSI operation returned an error. Try again. If the problem persists, contact Customer Support.
Comment: A reset SCSI operation returned an error

ENCLOSURE_FWUP_STAGE_RETURNED_FAILURE
ShortDescription : An Enclosure firmware update process failed.
LongDescription: An Enclosure firmware update process failed because the image cannot be staged properly. Try again. If the problem persists, contact Customer Support.
Comment: The MCCAgent Stage image operation returned failure in the Enclosure firmware update.

ENCLOSURE_FWUP_TOO_MANY_ENCLOSURES
ShortDescription : An Enclosure firmware update process failed.
LongDescription: An Enclosure firmware update process request specified too many Enclosures and cannot complete. Try again. If the problem persists, contact Customer Support.
Comment: Too many Enclosures were specified in the Enclosure firmware update request

ENCLOSURE_FWUP_TOO_MANY_FIRMWARES
ShortDescription : An Enclosure firmware update process failed.
LongDescription: An Enclosure firmware update process request specified too many firmware types and cannot complete. Try again. If the problem persists, contact Customer Support.
Comment: Too many firmware types were specified in the Enclosure firmware update request.

ENCLOSURE_FWUP_ZERO_ENCLOSURES
ShortDescription : An Enclosure firmware update process failed.
LongDescription: An Enclosure firmware update process request did not specify any Enclosures and cannot complete. Try again. If the problem persists, contact Customer Support.
Comment: No Enclosures were specified in the Enclosure firmware update request.

ENCLOSURE_FWUP_ZERO_ENCLOSURES_MATCH_FW
ShortDescription : An Enclosure firmware update process failed.
LongDescription: An Enclosure firmware update process request specified firmware types that did not match any of the specified Enclosures and cannot complete. Try again. If the problem persists, contact Customer Support.
Comment: No specified Enclosures match one of the specified firmware types in the Enclosure firmware update request.

ENCLOSURE_FWUP_ZERO_FIRMWARES
ShortDescription : An Enclosure firmware update process failed.
LongDescription: An Enclosure firmware update process request did not specify any firmware types and cannot complete. Try again. If the problem persists, contact Customer Support.
Comment: No firmware types were specified in the Enclosure firmware update request.

ENCLOSURE_IOMODULE_DOES_NOT_EXIST
ShortDescription : The Enclosure IO Module does not exist.
LongDescription: The Enclosure IO Module does not exist.
Comment: The Enclosure IO Module does not exist.

ENCLOSURE_LUN_NOT_FOUND
ShortDescription : Enclosure LUN was not found.
LongDescription: Enclosure LUN was not found. Contact Customer Support.
Comment: An Enclosure LUN was not found

ENCLOSURE_DATA_CONSISTENCY_RESULT_DOES_NOT_EXIST
ShortDescription : No data consistency results exist for the Enclosure.
LongDescription: The Enclosure does not have any data consistency results stored in the system. Perform a verify data consistency on the specific Enclosure to compile data consistency results and obtain the data consistency results for the specific Enclosure.
Comment: No data consistency results exist for the Enclosure.

ENCLOSURE_NONDISRUPTIVE_UPDATE_FAILED
ShortDescription : The non-disruptive update of Enclosures failed.
LongDescription: The non-disruptive update of Enclosures failed. Try the update again.
Comment: The non-disruptive update of Enclosures failed.

ENCLOSURE_NOT_ALL_CAN_BE_REACHED
ShortDescription : Not all of the Enclosures are reachable.
LongDescription: Not all the Enclosures are reachable in the system. Contact Customer Support.
Comment: Not all of the Enclosures are reachable.

ENCLOSURE_NOT_FOUND
ShortDescription : The specified Enclosure was not discovered in the Controller-to-Enclosure fabric network.
LongDescription: The specified Enclosure was not discovered in the Controller-to-Enclosure fabric network. Check the status of the Enclosure. If the problem persists, contact Customer Support.
Comment: The specified Enclosure was not discovered in the PI network

ENCLOSURE_NOT_REACHABLE
ShortDescription : The specified Enclosure cannot be reached from the Controller.
LongDescription: The specified Enclosure cannot be reached from the Controller.
Comment: The specified Enclosure cannot be reached from the Controller.

ENCLOSURE_RMAP_WRITE_FAILURE
ShortDescription : The system cannot update Enclosure RMAP data.
LongDescription: The system cannot update Enclosure RMAP data.
Comment: The update of Enclosure RMAP data failed.

ENCLOSURE_STATUS_NOT_AVAILABLE
ShortDescription : Enclosure status cannot be read.
LongDescription: Enclosure status cannot be read. Try again later.
Comment: Status for the specified Enclosure was not readable.

BUNDLE_NOT_FOUND
ShortDescription : The bundle requested for download was not on the system.
LongDescription: The bundle requested for download was not on the system.
Comment: The bundle requested for download was not on the system.

CALL_HOME_PROXY_CANNOT_BE_REACHED
ShortDescription : The HTTPS proxy specified in Call-Home settings is not reachable.
LongDescription: The request to modify Call Home Settings specified a hostname or IP address of a proxy server. The Pilot cannot reach this host. Check the setting provided and verify that the Pilot is able to reach the proxy server specified.
Comment: The HTTPS proxy specified in Call-Home settings is not reachable.

CALL_HOME_TRANSFER_FAILED
ShortDescription : The Call-Home transfer failed.
LongDescription: The requested Call-Home transfer to the configured server failed.
Comment: The Call-Home transfer failed.

CANNOT_ACCEPT_ENCLOSURE_EXTENDED_ENCLOSURE_LICENSE_NOT_INSTALLED
ShortDescription : The system cannot accept the additional Enclosure.
LongDescription: The system is restricted from adding more Enclosures to the system when the restricted Enclosure license is installed. Contact Customer Support.
Comment: The system cannot accept additional Enclosures when the restricted Enclosure license is in place and there is no extended Enclosure license.

CANNOT_ACCEPT_DRIVE_INVALID_STATE
ShortDescription : The system cannot accept a drive that is an invalid state.
LongDescription: A disk drive can only be accepted if it is in a known, valid state. The drive that was chosen to be accepted is not in a valid state. Check the status of the drive. If the problem persists, contact Customer Support.
Comment: The state of the specified Enclosure drive is not valid for the requested accept operation.

CANNOT_ACCEPT_NON_NEW_OR_FOREIGN_ENCLOSURE
ShortDescription : An Enclosure can only be accepted if it is new, foreign, or not in a Storage Domain.
LongDescription: An Enclosure can only be accepted if it is new, foreign, or not in a Storage Domain. The Enclosure that was chosen to be accepted is not new, nor is it foreign.
Comment: An Enclosure can only be accepted if it is new, foreign, or not in a Storage Domain.

UNTRAINED_DIMMS_FOUND
ShortDescription : A controller has untrained dimms and will need to be powercycled.
LongDescription: A controller has untrained dimms and will need to be powercycled.
Comment: A controller has untrained dimms and will need to be powercycled.

CM_EVT_CONTROLLER_MISSING_DIMMS
ShortDescription : A controller has missing dimms and will need to be powercycled.
LongDescription: A controller has missing dimms and will need to be powercycled.
Comment: A controller has missing dimms and will need to be powercycled.

CANNOT_ALLOCATE_TO_EMPTY_STORAGE_DOMAIN
ShortDescription : The system cannot allocate a filesystem or LUN to a Storage Domain containing 0 Enclosures.
LongDescription: When a LUN is allocated to a Storage Domain, the Storage Domain that the LUN is being allocated to must have enough capacity to fit the LUN.
Comment: The system cannot allocate a filesystem or LUN to a Storage Domain containing 0 Enclosures.

CANNOT_AUTHENTICATE_AGAINST_DISABLED_ACCOUNT
ShortDescription : The account authentication failed.
LongDescription: The account authentication failed. The account specified is disabled. Contact your administrator to verify account credentials.
Comment: The system cannot authenticate against a disabled account.

CANNOT_CHANGE_PERSONALITY_TO_NAS_IF_LUNS_EXIST
ShortDescription : The system cannot change the system personality to NAS-only if a LUN exists.
LongDescription: The system cannot change the system personality to NAS-only if a LUN exists. Delete all LUNs prior to attempting to change the system personality to NAS-only.
Comment: The system cannot change the system personality to NAS-only if a LUN exists.

CANNOT_CHANGE_PERSONALITY_TO_NON_SAN
ShortDescription : The system is configured to disallow change the system personality out of SAN once it is SAN.
LongDescription: The system is configured to disallow change the system personality out of SAN once it is SAN.
Comment: The system is configured to disallow change the system personality out of SAN once it is SAN.

CANNOT_CHANGE_PERSONALITY_TO_SAN_IF_FILESYSTEMS_EXIST
ShortDescription : The system cannot change the system personality to SAN-only if a filesystem and/or a file server exists.
LongDescription: The system personality cannot be changed to SAN-only if a filesystem and/or a file server exists. Delete all filesystems and file servers prior to attempting to change the system personality to SAN-only.
Comment: The system cannot change the system personality to SAN-only if a filesystem and/or a file server exists.

CANNOT_CHANGE_PERSONALITY_WHEN_SYSTEM_PERSONALITY_IS_UNKNOWN
ShortDescription : The system cannot change the system personality when the system personality is unknown.
LongDescription: The system cannot change the system personality when the system has not yet determined the personality of the Controllers that exist. This condition likely occurs when the personality is attempting to be changed and the Controllers have not completely restarted. Wait for the Controllers to completely restart, or restart the system without changing the system personality. After the system has completely restarted, the personality will be allowed to be changed with a subsequent restart attempt.
Comment: The system cannot change personality when the system personality is unknown

CANNOT_CHANGE_PERSONALITY_WITHOUT_RESTART
ShortDescription : The system personality cannot be changed without shutting down the system.
LongDescription: The personality, after initially set, can only be changed using the PerformShutdown command or the PerformRestart command.
Comment: The system cannot change system personality without shutting down the system.

CANNOT_CHANGE_SECURE_WORM_TO_COMPLIANT_SECURE_WORM_FILESYSTEM
ShortDescription : A SecureWORMfs cannot be changed to a compliant SecureWORMfs.
LongDescription: A SecureWORMfs cannot be changed to a compliant SecureWORMfs.
Comment: A SecureWORMfs cannot be changed to compliant secure WORM filesystem.

CANNOT_CHANGE_CONTROLLER_FOR_REPLICATING_LUN
ShortDescription : The Controller ownership cannot be changed.
LongDescription: The Controller ownership cannot be changed on a replicating LUN.
Comment: The sytem cannot re-home a LUN that has an active write split.

CANNOT_CLEANUP_HOST_GROUP_LUN_MAP_TO_DELETE_LUN
ShortDescription : A host group LUN map cannot be deleted so the LUN can be deleted
LongDescription: Pacman server failed to clean up the host group LUN mappings associated to the LUN being deleted. Try your request again, or manually clean up the host group LUN mappings, and then delete the LUN.
Comment: A host group LUN map cannot be deleted as a result of a LUN being deleted.

CANNOT_CLEANUP_HOST_GROUP_LUN_MAP_TO_MAKE_LUN_GLOBAL
ShortDescription : A host group LUN map cannot be deleted in order to make the LUN global.
LongDescription: While making a LUN global, the system failed to clean up the existing host group LUN mappings associated to the LUN. Try your request again, or manually clean up the host group LUN mappings, and then make the LUN global.
Comment: A host group LUN map cannot be deleted in order to make the LUN global.

CANNOT_CLONE_TIER_NOT_ON_SOURCE_FILESYSTEM
ShortDescription : The system cannot clone tier not on filesystem
LongDescription: A create clone request was received with tiers specified. The source ID of the tier specified doesn't match the identity of a tier that exists on the source filesystem. When cloning a filesystem, it is not permitted to add new tiers to the clone, and none of a source filesystem's tiers can be removed from the clone. Submit a request with a filesystem that inherits the source filesystem's tiers.
Comment: The system cannot clone tier not on source filesystem

CANNOT_CONFIGURE_FILESYSTEM_ON_CONTROLLER_NOT_CONTAINING_VIF
ShortDescription : A filesystem cannot be configured on a Controller not containing VIF.
LongDescription: A filesystem cannot be assigned to a Controller until a File Server has been created that has a VIF configured on the Controller. Modify an existing File Server and configure a VIF for a node on the Controller you wish to assign the filesystem, create a new File Server with a VIF configured for the Controller, or choose a different Controller to configure the filesystem on.
Comment: The system cannot configure a filesystem on a Controller not containing VIF.

CANNOT_CONFIGURE_NON_PROVISIONED_CONTROLLER_HBA_PORT
ShortDescription : A non-provisioned Controller HBA port cannot be configured.
LongDescription: The system does not permit this request on the Controller HBA port because the HBA is not been provisioned. Provision the HBA ports and then retry your request.
Comment: The system cannot configure a non-provisioned Controller HBA port.

CANNOT_CONFIGURE_PERSONALITY_FOR_UNPAIRED_CONTROLLERS
ShortDescription : Personality cannot be configured for two Controllers that are not partner nodes.
LongDescription: The request to configure personality was not valid because the Controllers specified are not partner nodes. Reformat the request so that the specified Controllers are partners.
Comment: The system cannot configure personality for two Controllers that are not paired.

CANNOT_CREATE_ACCOUNT_INSUFFICIENT_AUTHORIZATION
ShortDescription : You are not authorized to create an account with this role.
LongDescription: You are not authorized to create an account with this role.
Comment: You are not authorized to create an account with this role.

CANNOT_CREATE_ACCOUNT_UNKNOWN_ROLE
ShortDescription : The role you supplied is unknown, so an account cannot be created.
LongDescription: The role you supplied is unknown, so an account cannot be created. Select a valid role for the account.
Comment: The role you supplied is unknown, so an account cannot be created.

CANNOT_CREATE_ACCOUNT_WITH_THIS_ROLE
ShortDescription : An account with this role cannot be created.
LongDescription: An account with this role cannot be created.
Comment: The user is not allowed to create an account with this role. These are mandatory accounts that can only be created at startup.

CANNOT_CREATE_CLONE
ShortDescription : The system cannot create the clone.
LongDescription: The system cannot create the clone, because the repository is being deleted.
Comment: The system cannot create clone because the HOC has been or is being deleted.

CANNOT_CREATE_COPY
ShortDescription : The system cannot create the copy.
LongDescription: The system cannot create a copy because the repository is being deleted.
Comment: The system cannot create copy because the HOC has been or is being deleted.

CANNOT_CREATE_FILESYSTEM
ShortDescription : The configuration manager cannot create the requested filesystem.
LongDescription: The configuration manager cannot create the requested filesystem.
Comment: The system cannot create a filesystem, although we're not sure why.

CANNOT_CREATE_GLOBAL_MAPPING_FOR_GLOBALLY_MAPPED_LUN
ShortDescription : The system cannot create a global LUN mapping for a globally mapped LUN.
LongDescription: The system cannot create a global LUN mapping for a LUN that is already globally mapped. You must either modify the existing global mapping to change the LUN number or you must delete the existing map prior to issuing the create request.
Comment: The system cannot create a global LUN mapping for a globally mapped LUN.

CANNOT_CREATE_HOST_GROUP_LUN_MAP_FOR_GLOBALLY_MAPPED_LUN
ShortDescription : A host group LUN map cannot be created when the LUN is globally mapped
LongDescription: The LUN specified in the host group LUN map request is globally mapped. Choose a different LUN or delete the global LUN mapping prior to creating the host group LUN map.
Comment: A host group LUN map cannot be created when the LUN is globally mapped.

CANNOT_CREATE_HOST_INITIATOR_IN_APM_CONNECTED_SAN_HOST
ShortDescription : The initiator resides in a host connected with an FSPM driver.
LongDescription: The host cannot be created because the initiator resides in a host currently connected with an FSPM driver.
Comment: The host cannot be created because initiator resides in a host connected with an FSPM driver.

CANNOT_CREATE_INACTIVE_FILESYSTEM
ShortDescription : An inactive filesystem cannot be created.
LongDescription: A filesystem must be set to active at the time of creation.
Comment: The system cannot create a standalone inactive filesystem

CANNOT_CREATE_LUN
ShortDescription : The configuration manager cannot create the requested LUN.
LongDescription: The configuration manager cannot create the requested LUN.
Comment: The system cannot create LUN, although we're not sure whyr

CANNOT_CREATE_MAP_LUN_NOT_MAPPED
ShortDescription : The system cannot create host to LUN map . The LUN was not mapped
LongDescription: The specified LUN was not mapped, set the LUN to mapped before proceeding. Modify the LUN setting mapped to true, and then create the host to LUN map.
Comment: A LUN must be mapped before a host to LUN map can be created for it.

CANNOT_CREATE_NEW_TIER_ON_CLONE
ShortDescription : The system cannot create a new tier on a clone.
LongDescription: A clone must contain the same tier configuration as its source. No new tiers are allowed to be added to a clone.
Comment: The system cannot create a new tier on a clone.

CANNOT_CREATE_SNAPSHOT_SCHEDULE_FOR_PDS
ShortDescription : The system cannot create a snapshot schedule for a PDS filesystem.
LongDescription: The system cannot create a snapshot schedule for a PDS filesystem.
Comment: The system cannot create a snapshot schedule for the PDS filesystem.

CANNOT_DEACTIVATE
ShortDescription : An activated LUN or filesystem cannot be deactivated.
LongDescription: An activated LUN or filesystem cannot be deactivated.
Comment: Activated LUN or filesystem cannot be deactivated.

CANNOT_DELETE_ACCOUNT_INSUFFICIENT_AUTHORIZATION
ShortDescription : You are not authorized to delete this account.
LongDescription: You are not authorized to delete this account.
Comment: You are not authorized to delete this account.

CANNOT_DELETE_ACCOUNT_WITH_THIS_ROLE
ShortDescription : An account with this role cannot be deleted.
LongDescription: An account with this role cannot be deleted.
Comment: An account with this role cannot be deleted. Typically, mandatory accounts cannot be deleted.

CANNOT_DELETE_ALL_ACCOUNTS_LIST_REQUIRED
ShortDescription : You cannot delete all of the accounts. You must supply a list of accounts to delete.
LongDescription: You cannot delete all of the accounts. You must supply a list of accounts to delete.
Comment: You cannot delete all of the accounts. You must supply a list of accounts to delete. Not allowing all accounts to be deleted prevents accidental disasters.

CANNOT_DELETE_ALL_VIFS_ON_FILE_SERVER
ShortDescription : You cannot delete all of the VIFS on a file server. You have at least one VIF associated with a file server.
LongDescription: You cannot delete all of the VIFS on a file server. You have at least one VIF associated with a file server.
Comment: You cannot delete all of the VIFS on a file server. You have at least one VIF associated with a file server.

CANNOT_DELETE_FILESYSTEM
ShortDescription : The filesystem cannot be deleted.
LongDescription: The filesystem cannot be deleted.
Comment: The filesystem cannot be deleted.

CANNOT_DELETE_FILESYSTEM_TIER_OF_PARTIAL_COPY_FILESYSTEM
ShortDescription : The filesystem tier is a tier of a clone filesystem and cannot be deleted.
LongDescription: The filesystem tier is a tier of a clone filesystem and cannot be deleted.
Comment: The filesystem tier is a tier of a clone filesystem and cannot be deleted.

CANNOT_DELETE_FILESYSTEM_TIER_OF_SOURCE_FILESYSTEM
ShortDescription : The filesystem tier is a tier of a source filesystem of a clone and cannot be deleted.
LongDescription: The filesystem tier is a tier of a source filesystem of a clone and cannot be deleted.
Comment: The filesystem tier is a tier of a source filesystem of a clone and cannot be deleted.

CANNOT_DELETE_FILESYSTEM_WITH_IMMUTABLE_FILES
ShortDescription : The filesystem cannot be deleted because it has immutable files on it.
LongDescription: The filesystem cannot be deleted because it has immutable files on it.
Comment: The filesystem cannot be deleted because it has immutable files on it.

CANNOT_DELETE_GLOBAL_LUN_MAP_BY_ID
ShortDescription : The system cannot delete global LUN map by map identifier.
LongDescription: A global LUN map cannot be deleted by map Identifier. To delete a global LUN map, all mappings must be deleted using the Delete Global LUN Map request.
Comment: The system cannot delete a global LUN map by identifier.

CANNOT_DELETE_HOST_MAPPED_LUN_BY_LUN_ID
ShortDescription : The system cannot delete a host mapped LUN map by LUN ID.
LongDescription: A host mapped LUN map cannot be deleted by LUN identifier. To delete a host mapped LUN map, the Delete San Host LUN Map request should be used specifying the ID of the map that you want to delete.
Comment: The system cannot delete a host mapped LUN map by LUN ID.

CANNOT_DELETE_LUN
ShortDescription : The LUN cannot be deleted.
LongDescription: The LUN cannot be deleted.
Comment: The LUN cannot be deleted.

CANNOT_DELETE_LUN_MAPPING_EXISTS
ShortDescription : The system cannot delete a mapped LUN
LongDescription: The Delete LUN request specified that all mapped LUNs should be rejected. The LUN requested is mapped to hosts in the system. Either remove the mappings associated to the request or request the LUN be deleted and ignore mappings.
Comment: The system cannot delete a LUN when mapped.

CANNOT_DELETE_MAPPING_FOR_HOST_IN_HOST_GROUP
ShortDescription : The system cannot delete a mapping for a host inherited via group membership.
LongDescription: The system cannot delete a mapping for a host that is in a host group when the mapping being deleted was inherited by the host as a result of being part of a host group. To delete this mapping, the mapping must be deleted from the host group.
Comment: The system cannot delete a mapping for a host inherited via group membership.

CANNOT_DELETE_MORE_THAN_8K_LUNS_LICENSE
ShortDescription : The system cannot delete the license.
LongDescription: The system cannot delete a more than 8K LUNs license. Contact Customer Support if you are planning to remove this license from the system.
Comment: The system cannot delete a more than 8K vLUN license.

CANNOT_DELETE_NON_EMPTY_HOST_GROUP
ShortDescription : A host group that has at least one host and at least one mapping cannot be deleted.
LongDescription: A host group that has at least one host and at least one mapping cannot be deleted.
Comment: A host group that has at least one host and at least one mapping cannot be deleted.

CANNOT_DELETE_NON_EMPTY_STORAGE_DOMAIN
ShortDescription : A Storage Domain must be empty of all user data (for example, LUNs) before being deleted.
LongDescription: A Storage Domain must be empty of all user data (for example, LUNs) before being deleted.
Comment: A Storage Domain must be empty of all user data (for example, LUNs) before being deleted.

CANNOT_DELETE_NON_EMPTY_VOLUME_GROUP
ShortDescription : A volume group cannot be deleted if it contains any volumes.
LongDescription: If a volume group still contains any volumes (other volume groups, filesystems, LUNs, copies, etc.), then it cannot be deleted.
Comment: A volume group must be empty of all volumes (including other volume groups) before being deleted.

CANNOT_DELETE_OBJECT_PRECONDITION_FAILURES
ShortDescription : A delete request failed due to preconditions failure.
LongDescription: A delete request failed due to preconditions failure.
Comment: We received a delete due to precondition failures, whatever that might mean.

CANNOT_DELETE_ONLY_STORAGE_DOMAIN
ShortDescription : This Storage Domain cannot be deleted because it is the only Storage Domain.
LongDescription: This Storage Domain cannot be deleted because it is the only Storage Domain. There always must be at least one Storage Domain.
Comment: This Storage Domain cannot be deleted because it is the only Storage Domain. There always must be at least one Storage Domain.

CANNOT_DELETE_PERFORMANCE_PROFILE_IN_USE
ShortDescription : The system cannot delete a performance profile that is in use.
LongDescription: The system cannot delete a performance profile that is in use.
Comment: The system cannot delete a performance profile that is in use.

CANNOT_DELETE_REPOSITORY
ShortDescription : The specified storage space of the source volume cannot be deleted.
LongDescription: The storage space for a source volume cannot be deleted as long as clones are using the storage space.
Comment: The repository cannot be deleted because there are clones that depend on it.

CANNOT_DELETE_RESTRICTED_ENCLOSURE_LICENSE
ShortDescription : A Restricted Enclosure license cannot be deleted.
LongDescription: A Restricted Enclosure license cannot be deleted. Contact Customer Support if you are planning to add Enclosures to the system.
Comment: A Restricted Enclosure license cannot be deleted.

CANNOT_DELETE_ROOT_VOLUME_GROUP
ShortDescription : The root volume group cannot be deleted.
LongDescription: The root volume group cannot be deleted.
Comment: The root volume group cannot be deleted

CANNOT_DELETE_SAN_HOST_APM_CONNECTED
ShortDescription : The FSPM driver is currently connected.
LongDescription: The FSPM driver is currently connected so the host cannot be deleted.
Comment: A currently connected host cannot be deleted.

CANNOT_DELETE_SECURE_WORMFS_ON_HOLD
ShortDescription : A secure filesystem that is on hold cannot be deleted.
LongDescription: A secure filesystem cannot be deleted while it is disallowing file deletion.
Comment: A secure filesystem that is on hold cannot be deleted.

CANNOT_DELETE_SNAP_SCHEDULES_ACROSS_MULTIPLE_FILESYSTEMS
ShortDescription : The system cannot delete snapshot schedules across multiple filesystems
LongDescription: In a single DeleteSnapshotSchedule request a client is not allowed to delete snapshot schedules belonging to different filesystems. Submit numerous delete commands to delete snapshot schedules across different filesystems; one request per filesystem.
Comment: The system cannot delete snapshot schedules across multiple filesystems

CANNOT_DELETE_SOURCE_VOLUME_OF_CLONE
ShortDescription : This volume is the source volume of a clone and cannot be deleted.
LongDescription: This volume is the source volume of a clone and cannot be deleted.
Comment: This volume is the source volume of a clone and cannot be deleted.

CANNOT_DELETE_SOURCE_VOLUME_OF_COPY
ShortDescription : This volume is the source volume of a copy in progress and cannot be deleted.
LongDescription: This volume is the source volume of a copy in progress and cannot be deleted.
Comment: This volume is the source volume of a copy in progress and cannot be deleted.

CANNOT_DELETE_SYSTEM_PERFORMANCE_PROFILE
ShortDescription : The system cannot delete a system performance profile.
LongDescription: The system cannot delete system performance profile.
Comment: The system cannot delete a system performance profile.

CANNOT_DETERMINE_ENCLOSURE_TYPE
ShortDescription : The Enclosure type cannot be determined.
LongDescription: The Enclosure type cannot be determined; therefore, the request failed.
Comment: CONMAN was not able to determine the type of an Enclosure, causing the requested operation to fail.

CANNOT_DETERMINE_CURRENT_ACCOUNT
ShortDescription : The system cannot determine the current user's account.
LongDescription: This request requires that a specific account be used. The users current account cannot be determined.
Comment: The current account is required and that it cannot be determined.

CANNOT_DISABLE_ACCOUNT_CURRENT_ROLE
ShortDescription : The Primary Administrator Account and the Support Account cannot be disabled.
LongDescription: The Primary Administrator Account and the Support Account cannot be disabled.
Comment: The Primary Administrator Account and the Support Account cannot be disabled.

CANNOT_DISABLE_AUDITING
ShortDescription : Once enabled on a filesystem, auditing cannot be disabled.
LongDescription: Once enabled on a filesystem, auditing cannot be disabled.
Comment: Auditing cannot be disabled once enabled.

CANNOT_DISABLE_FILE_IMMUTABILITY_FOR_SECURE_WORM_FILESYSTEM
ShortDescription : File immutability cannot be disabled for a secure WORM filesystem.
LongDescription: File immutability cannot be disabled for a secure WORM filesystem.
Comment: File immutability cannot be disabled for a secure WORM filesystem.

CANNOT_DISABLE_FILE_PROTECTION_FOR_SECURE_WORM_FILESYSTEM
ShortDescription : File protection cannot be disabled for a secure WORM filesystem.
LongDescription: File protection cannot be disabled for a secure WORM filesystem.
Comment: File protection cannot be disabled for a secure WORM filesystem.

CANNOT_DISABLE_FILE_RETENTION
ShortDescription : Once enabled on a filesystem, file retention cannot be disabled.
LongDescription: Once enabled on a filesystem, file retention cannot be disabled.
Comment: File retention cannot be disabled once enabled.

CANNOT_DISABLE_VOLUME_IMMUTABILITY_FOR_COMPLIANT_SECURE_WORM_FILESYSTEM
ShortDescription : The DisableNonEmptyFilesystemDeletion flag cannot be disabled for a compliant secure WORM filesystem.
LongDescription: The DisableNonEmptyFilesystemDeletion flag cannot be disabled for a compliant secure WORM filesystem.
Comment: The DisableNonEmptyFilesystemDeletion flag cannot be disabled for a compliant secure WORM filesystem.

CANNOT_DISABLE_VOLUME_RETENTION
ShortDescription : Once enabled on a filesystem, volume retention cannot be disabled.
LongDescription: Once enabled on a filesystem, volume retention cannot be disabled.
Comment: Volume retention cannot be disabled once enabled.

CANNOT_DOWNGRADE_NON_DISRUPTIVELY
ShortDescription : The system cannot be downgraded non-disruptively.
LongDescription: Software downgrades are disruptive. A software downgrade requires the user to ignore compatibility matrix checking and to always install all components.
Comment: The system cannot be force-downgraded non-disruptively.

CANNOT_ENABLE_VOLUME_IMMUTABILITY_FOR_CLONE
ShortDescription : The system cannot enable volume immutability for a clone filesystem.
LongDescription: The system cannot enable volume immutability for a clone filesystem.
Comment: The system cannot enable volume immutability for a clone filesystem.

CANNOT_EXCLUDE_DRIVE_GROUPS_FROM_DIFFERENT_STORAGE_DOMAINS
ShortDescription : The system cannot exclude drive groups from multiple Storage Domains.
LongDescription: In a single CSI Exclude Drive Group request, you cannot specify a set of drive groups that exist in different Storage Domains. Update your request to only include drive groups that are in the same Storage Domain or issue multiple requests to exclude the drive groups on a per Storage Domain basis.
Comment: The system cannot exclude drive groups from multiple Storage Domains.

CANNOT_EXCLUDE_DRIVE_GROUP_THAT_DOES_NOT_EXIST_IN_STORAGE_DOMAIN
ShortDescription : The system cannot exclude a drive group that is not in a Storage Domain.
LongDescription: A drive group can only be excluded from a Storage Domain if it belongs to a Storage Domain. The drive group that was chosen to be excluded does not exist in a Storage Domain.
Comment: The system cannot exclude a drive group that is not in a Storage Domain.

CANNOT_EXCLUDE_NON_EMPTY_DRIVE_GROUP
ShortDescription : The system cannot exclude a Drive Group from a Storage Domain when a LUN is touching it and cannot be migrated to a new Drive Group.
LongDescription: An Enclosure cannot be excluded from a Storage Domain when a LUN is touching it. The LUNs that are touching this Enclosure must be removed before excluding this Enclosure.
Comment: The system cannot exclude a Drive Group from a Storage Domain when a LUN is touching it and cannot be migrated to a new Drive Group.

CANNOT_FIND_CALLHOME_MATRIX_FILE
ShortDescription : The system cannot find the Call-Home matrix.
LongDescription: During an upload, the Call-Home matrix could not be found.
Comment: The system cannot find the Call-Home matrix.

CANNOT_HAVE_MULTIPLE_TIERS_POINTING_TO_ONE_TIER
ShortDescription : Multiple tiers cannot point to a single tier.
LongDescription: Multiple tiers cannot point to a single tier.
Comment: The system cannot have multiple tiers pointing to a single tier.

CANNOT_INCLUDE_ENCLOSURE_WRONG_STATUS
ShortDescription : The Enclosure cannot be included into the system.
LongDescription: An Enclosure might already be accepted into the system or the Enclosure is not in a state that allows the system to configure paths to the Enclosure. This can be due to a firmware update or a failed hardware component in the Enclosure.
Comment: The Enclosure cannot be included into the system due to a bad configuration.

CANNOT_INCLUDE_DRIVE_GROUP_ALREADY_IN_STORAGE_DOMAIN
ShortDescription : The system cannot include a drive group that is already in a Storage Domain.
LongDescription: A drive group can only be included into a Storage Domain if it does not already belong to a Storage Domain. The drive group that was chosen to be accepted already exists in a Storage Domain.
Comment: The system cannot include a drive group that is already in a Storage Domain

CANNOT_INSTALL_MORE_THAN_8K_LUNS_LICENSE_LESS_THAN_4GB_PILOT
ShortDescription : The system cannot install the license.
LongDescription: The system cannot install more than an 8K LUNs license because the Pilot hardware is not sufficient to support this configuration. Contact Customer Support if you are planning to install this license on the system.
Comment: The system cannot install more than an 8K vLUN license because the Pilot has less than 4GB of memory.

CANNOT_INSTALL_MORE_THAN_8K_LUNS_LICENSE_NAS_CONTROLLER_PRESENT
ShortDescription : The system cannot install the license.
LongDescription: The system cannot install more than an 8K LUNs license because a NAS Controller was detected. Contact Customer Support if you are planning to install this license on the system.
Comment: The system cannot install more than an 8K vLUN license because a NAS Controller is present.

CANNOT_LOGIN_NO_SSN
ShortDescription : The system serial number is required before logging in.
LongDescription: Login will fail until the system serial number has been loaded.
Comment: Login will fail until the system serial number has been loaded.

CANNOT_MIGRATE_CAPACITY_TO_REMAINING_TIERS
ShortDescription : Filesystem tier cannot be migrated.
LongDescription: Attempt to delete a filesystem tier failed because the removed tier's capacity cannot be migrated to the remaining tiers.
Comment: When a filesystem tier is deleted then the remaining tiers in the filesystem cannot migrate the capacity of the removed tier.

CANNOT_MODIFY_ACCOUNT_CURRENT_ROLE
ShortDescription : An account with this role cannot have its role changed.
LongDescription: An account with this role cannot have its role changed.
Comment: An account with this role cannot have its role changed. Typically, a mandatory account cannot have its role changed.

CANNOT_MODIFY_ACCOUNT_TO_NEW_ROLE
ShortDescription : The account cannot change its current role to the role requested.
LongDescription: The account cannot change its current role to the role requested.
Comment: The account cannot change its current role to the role requested. Typically, you cannot change an account role to be a role of one of the mandatory accounts.

CANNOT_MODIFY_ACCOUNT_WITH_THIS_ROLE
ShortDescription : An account with this role cannot be modified.
LongDescription: An account with this role cannot be modified.
Comment: The user is not allowed to modify an account with this role. These are mandatory accounts that can only be modify by someone logged in on that account.

CANNOT_MODIFY_FILESYSTEM
ShortDescription : The filesystem cannot be modified.
LongDescription: The PDS filesystem is an internal filesystem that cannot be modified.
Comment: The filesystem cannot be modified.

CANNOT_MODIFY_GLOBAL_LUN_BY_SAN_HOST_LUN_PAIR
ShortDescription : The system cannot modify a globally mapped LUN map by host-LUN pair.
LongDescription: A globally-mapped LUN map cannot be modified on a host-LUN pair basis. To modify a globally-mapped LUN map, the Modify Global LUN Map request should be used.
Comment: The system cannot modify a globally mapped LUN map by host-LUN pair.

CANNOT_MODIFY_HOST_MAPPED_LUN_BY_LUN_ID
ShortDescription : The system cannot modify a host-mapped LUN map by LUN ID.
LongDescription: A host-mapped LUN map cannot be modified by LUN identifier. To modify a host-mapped LUN map, the Modify San Host LUN Map request should be used specifying the ID of the map you wish to modify.
Comment: The system cannot modify a host-mapped LUN map by LUN ID.

CANNOT_MODIFY_LOAD_BALANCING_WHEN_SOURCE_IS_READ_ONLY
ShortDescription : The system cannot modify load balancing when the load balancing source is read-only.
LongDescription: The system cannot modify load balancing when the load balancing source is read-only.
Comment: The system cannot modify load balancing when the load balancing source is read-only.

CANNOT_MODIFY_MAPPING_OF_HOST_IN_HOST_GROUP
ShortDescription : The system cannot modify mapping of a host inherited via group membership.
LongDescription: The system cannot modify mapping of a host that is in a host group when the mapping being modified was inherited by the host as a result of being part of a host group. To modify such mappings, the mappings of the host group must be modified.
Comment: The system cannot modify mapping of a host inherited via group membership.

CANNOT_MODIFY_OFFLINE_FILESYSTEM
ShortDescription : A filesystem cannot be modified while it is offline.
LongDescription: A filesystem cannot be modified while it is offline.
Comment: A filesystem cannot be modified while it is offline.

CANNOT_MODIFY_OFFLINE_LUN
ShortDescription : A LUN cannot be modified while it is offline.
LongDescription: A LUN cannot be modified while it is offline.
Comment: A LUN cannot be modified while it is offline.

CANNOT_MODIFY_ROOT_VOLUME_GROUP
ShortDescription : The root volume group cannot be modified or deleted.
LongDescription: None of the parameters of the root volume group can be modified. Its name should be empty, there can be no maximum capacity assigned, and it cannot have access control lists associated with it. The root volume group cannot be deleted.
Comment: The root volume group cannot be changed in any way.

CANNOT_MODIFY_TIER_MIGRATION_ORDER_OF_CLONE
ShortDescription : The system cannot modify the tier migration order of a clone.
LongDescription: The system cannot modify the tier migration order of a clone.
Comment: The system cannot modify the tier migration order of a clone.

CANNOT_MODIFY_UNMODIFYABLE_FIELD
ShortDescription : The system cannot modify an unmodifyable field.
LongDescription: The system cannot modify an unmodifyable field.
Comment: The system cannot modify an unmodifyable field. This is for debugging purposes.

CANNOT_MOVE_ENCLOSURES_FROM_MULTIPLE_STORAGE_DOMAINS
ShortDescription : Enclosures from multiple source Storage Domains cannot be moved in a single command.
LongDescription: Enclosures from multiple source Storage Domains cannot be moved in a single command. Multiple commands must be used; one for each source Storage Domain.
Comment: Enclosures from multiple source Storage Domains cannot be moved in a single command. Multiple commands must be used; one for each source Storage Domain.

CANNOT_MOVE_ENCLOSURE_ALREADY_IN_TARGET_STORAGE_DOMAIN
ShortDescription : Enclosure cannot be moved since it is already in Storage Domain.
LongDescription: Enclosure cannot be moved since it is already in specified Storage Domain. Verify which Enclosure you intend to move to the specified Storage Domain and try again.
Comment: Enclosure cannot be moved since it is already in target Storage Domain.

CANNOT_MOVE_LUN_WITH_CLONES_FROM_STORAGE_DOMAIN
ShortDescription : A LUN cannot be moved to another Storage Domain while it has clones.
LongDescription: A LUN cannot be moved to another Storage Domain while it has clones. Delete any clones of this LUN before attempting to move it to another Storage Domain.
Comment: A LUN cannot be moved to another Storage Domain while it has clones.

CANNOT_PERFORM_HDD_UPDATE_ALERT_EXISTS
ShortDescription : An HDD firmware update is not permitted when critical alerts exist.
LongDescription: An HDD firmware update is not permitted when critical alerts exist. Address the alerts that exist in the system and perform the update again.
Comment: The system cannot perform HDD update alert exists.

CANNOT_PERFORM_HDD_UPDATE_SYSTEM_NOT_NORMAL
ShortDescription : The system cannot perform an HDD firmware update when not in normal state.
LongDescription: The system is not in normal state and, therefore, cannot permit an HDD firmware update to be performed. Address the hardware issues in the system and perform the update again.
Comment: The system cannot perform HDD update. The system does not have a normal status.

CANNOT_PERFORM_UPDATE_DUE_TO_BACKGROUND_ENCLOSURE_OPERATIONS
ShortDescription : The system cannot perform a software update while background Enclosure operations are running.
LongDescription: The system has at least one background Enclosure operation running, so an update cannot be performed. Wait for the background Enclosure operations, rebuild, copyback, or copyaway, to complete and then retry the update. Or, choose a software update option to ignore current the current hardware state.
Comment: The system cannot perform a software update while background Enclosure operations (rebuild, copy-back, or copy-away) are running.

CANNOT_PERFORM_UPDATE_DUE_TO_DISCONNECTED_CONTROLLER_PRIVATE_INTERCONNECT_LINK
ShortDescription : The system cannot perform a software update while a controller is missing a private interconnect link.
LongDescription: The system cannot perform a software update while a controller is missing a private interconnect link. Please re-insert or replace the controller's private interconnect link and then retry the update. Or, choose a software update option to ignore current the current hardware state.
Comment: The system cannot perform a software update while a controller is missing a private interconnect link.

CANNOT_PERFORM_UPDATE_DUE_TO_TOPOLOGY_VALIDATION_FAILURE
ShortDescription : The system cannot perform a software update because a topology validation failure exists.
LongDescription: The system has a topology validation failure; therefore, an update cannot be performed. Resolve the topology problem, and then retry the update. Or, choose "Ignore bad system state" to override this check on the software update.
Comment: The system cannot perform a software update because a topology validation failure exists.

CANNOT_PERFORM_UPDATE_WHEN_ONE_IS_ALREADY_SCHEDULED
ShortDescription : The system cannot perform an update when an update job is already scheduled.
LongDescription: The system has a software update job already scheduled to run; therefore, an additional update cannot be performed. Wait for the scheduled update to run, or delete the scheduled job and retry the update.
Comment: An update job is already scheduled.

CANNOT_PERFORM_UPDATE_WITH_DIFFERENT_PARAMS_THAN_PREVIOUS_FAILURE
ShortDescription : The request was not valid because of a previous failed software update attempt.
LongDescription: The system had a previously unfinished software update. To make sure that the system is upgraded properly from this previously failed attempt, the same software package should be used to complete the system update properly. A different software update package than the one that originally failed can be used, but the Override Failed Software Update flag must be set.
Comment: The system had a previously unfinished software update and doesn't permit a request to update with different versions than the previous unfinished request.

CANNOT_REHOME_FILESYSTEM_TO_NEW_CONTROLLER
ShortDescription : A filesystem can only be re-homed to a Controller where the filesystem already resides.
LongDescription: A filesystem can only be re-homed to a Controller where the filesystem already resides. Re-try your modify request providing the identity of the Controller where the filesystem already resides.
Comment: A filesystem can only be re-homed to a Controller where the filesystem already resides.

CANNOT_REHOME_LUN_TO_NEW_CONTROLLER
ShortDescription : A LUN can only be re-homed to a Controller where the LUN already resides.
LongDescription: A LUN can only be re-homed to a Controller where the LUN already resides. Re-try your modify request providing the identity of the Controller where the LUN already resides.
Comment: A LUN can only be re-homed to a Controller where the LUN already resides.

CANNOT_REMOVE_LIVE_CONTROLLER
ShortDescription : A Controller cannot be removed from the Oracle FS System while the system is running.
LongDescription: A Controller cannot be removed from the Oracle FS System while the system is running. All resources must be moved off of the Controller before it can be removed.
Comment: A Controller cannot be removed from the Oracle FS System while the system is running.

CANNOT_REMOVE_NON_EMPTY_ENCLOSURE
ShortDescription : The Enclosure cannot be removed from the Oracle FS System because it has data on it.
LongDescription: The Enclosure cannot be removed from the Oracle FS System because it has data on it. Move or delete all the data on the Enclosure and try again.
Comment: The Enclosure cannot be removed from the Oracle FS System because it has data on it.

CANNOT_REMOVE_PRIMARY_FROM_CURRENT_PRIMARY_STORAGE_DOMAIN
ShortDescription : The primary designation cannot be removed from the current Storage Domain and transferred to another Storage Domain.
LongDescription: The primary designation cannot be removed from the current Storage DOmain and transferred to another Storage Domain. This might be a temporary situation, so try the command again.
Comment: The primary designation for this Storage Domain cannot be removed from the current primary Storage Domain and transferred to another Storage Domain. There can only be one primary Storage Domain.

CANNOT_REMOVE_REPOSITORY_OF_SOURCE
ShortDescription : The repository of a filesystem or LUN that has clones cannot be removed.
LongDescription: The repository of a filesystem or LUN that has clones cannot be removed.
Comment: The repository of a filesystem or LUN that has clones cannot be removed.

CANNOT_REMOVE_CONTROLLER_IN_USE
ShortDescription : This Controller has SLUNs and filesystems configured on it; therefore, the Controller cannot be removed.
LongDescription: This Controller has SLUNs and filesystems configured on it; therefore, the Controller cannot be removed.
Comment: This Controller has SLUNs and filesystems configured on it; therefore, the Controller cannot be removed.

CANNOT_REPLACE_ENCLOSURE_WHEN_ENCLOSURES_ARE_DIFFERENT_TYPES
ShortDescription : You cannot replace an old Enclosure with a new Enclosure when the Enclosures are not the same type (DE2-24P or DE2-24C).
LongDescription: You cannot replace an old Enclosure with a new Enclosure when the Enclosures are not the same type (DE2-24P or DE2-24C).
Comment: You cannot replace an old Enclosure with a new Enclosure when the Enclosures are not the same type (DE2-24P or DE2-24C).

CANNOT_REPLACE_ENCLOSURE_WHEN_NEW_ENCLOSURE_IN_STORAGE_DOMAIN
ShortDescription : You cannot replace an old Enclosure when the new Enclosure is already in some Storage Domain.
LongDescription: You cannot replace an old Enclosure when the new Enclosure is already in some Storage Domain. Consider using a Remove Enclosure request on the old Enclosure; it might accomplish your task.
Comment: You cannot replace an old Enclosure when the new Enclosure is already in some Storage Domain. The sole purpose of a ReplaceEnclosure request is to replace an old Enclosure in a Storage Domain with a new Enclosure that is not is a Storage Domain.

CANNOT_REPLACE_ENCLOSURE_WHEN_OLD_ENCLOSURE_NOT_IN_STORAGE_DOMAIN
ShortDescription : You cannot replace the old Enclosure when it is not in a Storage Domain.
LongDescription: You cannot replace the old Enclosure when it is not is a Storage Domain. Consider using a Remove Enclosure request on the old Enclosure; it might accomplish your task.
Comment: You cannot replace the old Enclosure because it is not in a Storage Domain. The sole purpose of a ReplaceEnclosure request is to replace an old Enclosure in a Storage Domain with a new Enclosure that is not is a Storage Domain.

CANNOT_REPLACE_ENCLOSURE_WITH_SAME_ENCLOSURE
ShortDescription : You cannot replace an Enclosure with itself.
LongDescription: You cannot replace an Enclosure with itself. The old Enclosure must be replaced with a new Enclosure.
Comment: The ReplaceEnclosure CSI request is asking to replace an Enclosure with itself: the old Enclosure and the new Enclosure are the same.

CANNOT_REPLACE_ENCLOSURE_WITH_SMALLER_CAPACITY_ENCLOSURE
ShortDescription : You cannot replace an old Enclosure with a new Enclosure when the new Enclosure has a smaller capacity.
LongDescription: You cannot replace an old Enclosure with a new Enclosure when the new Enclosure has a smaller capacity.
Comment: You cannot replace an old Enclosure with a new Enclosure when the new Enclosure has a smaller capacity.

CANNOT_RESET_PRIMARY_ON_PRIMARY_STORAGE_DOMAIN
ShortDescription : The primary Storage Domain cannot reset the primary status on itself.
LongDescription: The primary Storage Domain cannot reset the primary status on itself. The primary Storage Domain's designation can be transferred from one Storage Domain to another, but it cannot be unilaterally reset.
Comment: During a Modify Storage Domain CSI request, the Storage Domain being modified is currently the primary Storage Domain. The modify request has the primary field set TO false. Primary can be transferred from one Storage Domain to another via a Create Storage Domain or the Modify Storage Domain CSI request, but it cannot be unilaterally reset.

CANNOT_RESTORE_DRIVE_GROUP_WITH_DATA_LOSS
ShortDescription : A drive group cannot be restored with data loss.
LongDescription: A drive group cannot be restored with data loss.
Comment: A drive group cannot be restored with data loss.

CANNOT_RESTORE_TO_COMPLIANT_WORM_FILESYSTEM
ShortDescription : A clone filesystem cannot be restored to a compliant secure WORM filesystem.
LongDescription: A clone filesystem cannot be restored to a compliant secure WORM filesystem.
Comment: A clone filesystem cannot be restored to a compliant secure WORM filesystem.

CANNOT_RUN_DIAGNOSTICS_FOR_NON_PREPARED_NODE
ShortDescription : A node must be prepared prior to running diagnostics.
LongDescription: A node must be prepared prior to running diagnostics.
Comment: The system cannot run Controller diagnostics when the node is not prepared.

CANNOT_SATISFY_REQUEST_WRONG_STATE
ShortDescription : The request is not permitted in this system state.
LongDescription: All requests are only permitted to be run when the system is in a state that allows the request to succeed. Check the system state prior to running a request. If the system is in an unrecognized or unexpected state, contact Customer Support.
Comment: The request is not permitted in this system state.

CANNOT_SET_FIELDS_FOR_WORLD_ACCESS_TYPE
ShortDescription : The system cannot set the host name, net mask, or host mask type for a host entry of world access type.
LongDescription: The system cannot set the host name, net mask, or host mask type for a host entry of world access type.
Comment: The system cannot set the host name, net mask, or host mask type for a host entry of world access type.

CANNOT_SET_LUN_MASKS_ON_AUTO_ASSIGNED_LUN
ShortDescription : The system cannot set the LUN masking attributes on an auto-assigned LUN.
LongDescription: The system cannot set the LUN masking attributes on an auto-assigned LUN at creation time. Either manually assign the Controller or allow the LUN to be auto-assigned. After the LUN has been assigned to a Controller, then modify the LUN to set the masking attributes.
Comment: The system cannot set the LUN masking attributes on an auto assigned LUN.

CANNOT_SET_PARENT_TO_DESCENDANT
ShortDescription : An attempt was made to set the parent volume group to a child of this volume group.
LongDescription: The parent volume group must not be set to one of the existing descendants of this volume group.
Comment: An attempt was made to set the parent volume group to a child of this volume group.

CANNOT_SET_PARENT_TO_SELF
ShortDescription : An attempt was made to set the parent volume group to this volume group.
LongDescription: The parent of a volume group must not be itself. The parent volume group field was illegal because it was set to the volume group currently being acted upon.
Comment: An attempt was made to set the parent volume group to this volume group.

CANNOT_UNASSOCIATE_HOST_FROM_HOST_GROUP_THAT_HAS_MAPPINGS
ShortDescription : A host may only be unassociated from a host group if the host group mapping handling mode is not set to fail, if host group mappings exist.
LongDescription: A host may only be unassociated from a host group if the host group mapping handling mode is not set to fail, if host group mappings exist. Choose a different mode to unassociate this host.
Comment: A host can only be unassociated from a host group if the host group mapping handling mode is not set to fail if host group mappings exist.

CANNOT_UPDATE_SOFTWARE_THAT_IS_NOT_STAGED
ShortDescription : An upgrade component was requested that is not in the currently staged configuration.
LongDescription: An upgrade component was requested that is not in the currently staged configuration. Either change the list of upgrade components or stage a new package.
Comment: An upgrade component was requested that is not in the currently staged configuration.

CAPACITY_GREATER_THAN_ANCESTOR_CAPACITY
ShortDescription : The capacity cannot exceed the maximum capacity of the volume group and its associated hierarchy.
LongDescription: A volume's addressable capacity cannot exceed the maximum capacity the volume group and its associated hierarchy.
Comment: The capacity cannot exceed the maximum capacity of the volume group or any of its parents.

CAPACITY_GREATER_THAN_MAX_CAPACITY_OF_PARENT
ShortDescription : The capacity setting is not valid.
LongDescription: The capacity setting is not valid. The capacity setting of the filesystem tier cannot be more than the addressable capacity of the parent filesystem.
Comment: The capacity setting of the filesystem tier is greater than the overall max capacity of the filesystem that it is contained within.

CAPACITY_GREATER_THAN_SYSTEM_CAPACITY
ShortDescription : The capacity is not valid.
LongDescription: The capacity is not valid. Capacity cannot exceed the available system capacity.
Comment: Capacity exceeds what is available in the system.

CAPACITY_LESS_THAN_DESCENDANT_CAPACITY
ShortDescription : The volume group capacity cannot be less than the maximum capacity of any volume group or volumes contained in the volume group.
LongDescription: The volume group capacity cannot be less than the maximum capacity of any volume group or volumes contained in the volume group. Check the maximum capacity of existing volumes and volume groups within the volume group.
Comment: The capacity cannot be less than the maximum capacity of a volume group or volumes contained within the volume group.

CAPACITY_SETTING_CANNOT_BE_DECREASED
ShortDescription : The capacity setting cannot be decreased.
LongDescription: The capacity setting cannot be decreased after a volume has been created.
Comment: Various capacities settings within partial and full copy volumes can be increased but not decreased.

CERT_KEY_VALIDATION_FAILURE
ShortDescription : The certificate and key files provided do not match.
LongDescription: The certificate and key files provided do not match.
Comment: The certificate and key files provided do not match.

CHAP_NAME_MISSING
ShortDescription : Chap Name field is missing
LongDescription: Because authentication is enabled, the Chap Name field is required. The Chap Name field is missing from this request.
Comment: ChapName field is missing

CHAP_SETTINGS_NOT_AVAILABLE_WHILE_RADIUS_ENABLED
ShortDescription : CHAP settings cannot be modified.
LongDescription: Radius server authentication is enabled. Chap Name and Chap Secret cannot be modified or set while Radius server authentication is enabled. Disable Radius authentication to modify these settings.
Comment: Chap settings cannot be modified while radius enabled

CHECK_VERSIONS_FOR_UPGRADE
ShortDescription : Prompt for on-the-fly update logic.
LongDescription: In system coldstart or node rejoin, this error halts coldstart to prompt us to figure out if anything needs to be updated on the fly.
Comment: In system coldstart or node rejoin, this error halts coldstart to prompt us to figure out if anything needs to be updated on the fly.

CHOICE_NOT_SELECTED
ShortDescription : Select at least one item.
LongDescription: Select at least one item for this operation.
Comment: This error is intended for use by CSI validation code when none of the choices has been specified for a choice field.

CIFS_DOMAIN_CONTROLLER_COULD_NOT_BE_REACHED
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

CIFS_DOMAIN_NOT_JOINED
ShortDescription : The CIFS domain could not be joined.
LongDescription: The CIFS domain could not be joined.
Comment: The CIFS domain could not be joined.

CIFS_DUPLICATE_SHARE_NAME
ShortDescription : The CIFS share name already exists on this file server.
LongDescription: The CIFS share name already exists on this file server. A share name must be unique per fileserver.
Comment: The CIFS share name already exists on this file server. A share name should be unique on a fileserver.

CIFS_INVALID_BACKUP_OPERATOR_NAME
ShortDescription : The group specified for the local backup operator was not found.
LongDescription: The group specified for the local backup operator was not found by a query sent to the Domain Controller. Please check the spelling and confirm that the named group exists in Active Directory.
Comment: The group specified for the local backup operator was not found. The named group must exist to be granted access rights to perform backup operations.

CIFS_INVALID_BOTH_GROUPS_NAME
ShortDescription : The groups specified for both the local backup operator and the local administrator were not found.
LongDescription: The groups specified for both the local backup operator and the local administrator were not found by queries sent to the Domain Controller. Please check the spelling and confirm that the named groups exist in Active Directory.
Comment: The groups specified for both the local backup operator and the local administrator were not found. The named groups must exist to be granted access rights to perform backup and administrator operations.

CIFS_INVALID_DOMAIN_NAME
ShortDescription : The CIFS domain name is invalid for authentication type NTLM.
LongDescription: The CIFS domain name is invalid. An NTLM domain name is a simple (non-qualified) name no more than 15 characters in length. The following characters are not allowed: '\', '/', ':', '', '?', '"', '<', '>', '|', '.' Comment: The CIFS domain name is invalid for authentication type NTLM. An NTLM domain name is a simple (non-qualified) name no more than 15 characters in length. The following characters are not allowed: '\', '/', ':', '', '?', '"', '<', '>', '|', '.'

CIFS_INVALID_LOCAL_ADMIN_NAME
ShortDescription : The group specified for the local administrator was not found.
LongDescription: The group specified for the local administrator was not found by a query sent to the Domain Controller. Please check the spelling and confirm that the named group exists in Active Directory.
Comment: The group specified for the local administrator was not found. The named group must exist to be granted access rights to perform administrator operations.

CIFS_INVALID_SERVER_NAME
ShortDescription : The CIFS server name is invalid.
LongDescription: The CIFS server name is invalid. A CIFS server name is a simple (non-qualified) name no more than 15 characters in length. The following characters are not allowed: '\', '/', ':', '', '?', '"', '<', '>', '|', '.' Comment: The CIFS server name is invalid. A CIFS server name is a simple (non-qualified) name no more than 15 characters in length. The following characters are not allowed: '\', '/', ':', '', '?', '"', '<', '>', '|', '.'

CIFS_INVALID_SHARE_NAME
ShortDescription : The CIFS share name is invalid.
LongDescription: The CIFS share name is invalid. A CIFS share name is a maximum of 80 characters in length. The following characters are not allowed: '\', '/', ':', '', '?', '"', '<', '>', '|', '[', ']', '+', '=', ';', ',' Comment: The CIFS share name is invalid. A CIFS share name is a maximum of 80 characters in length. The following characters are not allowed: '\', '/', ':', '', '?', '"', '<', '>', '|', '[', ']', '+', '=', ';', ','

CIFS_JOIN_DOMAIN_FAILED
ShortDescription : CIFS join domain failed. Refer to the event log for more detailed information.
LongDescription: CIFS join domain failed. The CIFS software component could not authenticate and join the domain. Refer to the event log for more detailed information.
Comment: The CIFS software component could not authenticate and join the domain.

CIFS_LICENSE_REQUIRED
ShortDescription : This request requires a CIFS license.
LongDescription: This request requires a CIFS license. Install the required license.
Comment: This request requires a CIFS license.

CIFS_LOCAL_GROUPS_NOT_PRESENT
ShortDescription : The local groups specified are not present in the directory.
LongDescription: The local groups specified are not present in the directory.
Comment: The local groups specified are not present in the directory.

CIFS_MAX_SHARES_PER_AXIOM
ShortDescription : The maximum number of CIFS shares have been configured.
LongDescription: The maximum number of CIFS shares have been configured. The share could not be added since the configuration has reached the system limit of 81920 shares.
Comment: The maximum number of CIFS shares have been configured. The share could not be added since the configuration has reached the system limit of 81920 shares.

CIFS_MAX_SHARES_PER_VSERVER
ShortDescription : The maximum number of CIFS shares have been configured for this file server.
LongDescription: The maximum number of CIFS shares have been configured for this file server.The share could not be added since the configuration has reached the system limit of 8192 shares per file server.
Comment: The maximum number of CIFS shares have been configured for this file server.

CIFS_NFS_LICENSE_REQUIRED
ShortDescription : This request requires a CIFS or NFS license.
LongDescription: This request requires a CIFS or NFS license. Install the required license.
Comment: This request requires a CIFS or NFS license.

CIFS_PROTOCOL_NOT_ENABLED_ON_FILE_SERVER
ShortDescription : This request requires CIFS to be enabled on the File Server.
LongDescription: This request requires a CIFS or NFS license. Enable the CIFS protocol on the selected File Server or use this request on a File Server that has CIFS enabled.
Comment: This request requires CIFS to be enabled on the File Server.

CIFS_PROTOCOL_REQUIRES_SERVER_AND_DOMAIN_NAMES
ShortDescription : To enable a CIFS server, a server name, and domain name must be configured.
LongDescription: To enable a CIFS Server, a server name, and domain name must be configured.
Comment: To enable a CIFS server, a server name, and domain name must be configured.

CIFS_SHARE_DOES_NOT_EXIST
ShortDescription : The specified CIFS share does not exist.
LongDescription: The specified CIFS share does not exist.
Comment: The CIFS share does not exist.

CIFS_SHARE_ID_SPECIFIED_WITHOUT_FILE_SERVER
ShortDescription : A CIFS share ID was specified without specifying a File Server.
LongDescription: A CIFS share ID was specified without specifying a File Server.
Comment: The CIFS share ID must be used with File Server ID/FQN.

CLEAR_FBM_FLAG_NOT_PERMITTED_WITHOUT_FORCE_CONTROLLER_RESTART_FLAG
ShortDescription : The clear flash-backed memory flag is not permitted without specifying the force Controller shutdown flag.
LongDescription: The clear flash-backed memory flag is not permitted without specifying the force Controller shutdown flag.
Comment: The clear flash-backed memory flag is not permitted without specifying the force Controller shutdown flag.

CLONE_TIER_MIGRATION_ORDER_MUST_MATCH_SOURCE
ShortDescription : The tier migration order of a clone must match that of the clone's source.
LongDescription: The tier migration order of a clone must match that of the clone's source.
Comment: The tier migration order of a clone must match that of the clone's source.

CLONES_CANNOT_MOVE_TO_NEW_DOMAIN
ShortDescription : Clones cannot move to new domain.
LongDescription: Clones cannot move to new domain. When moved, a clone must stay in the storage class that it is in currently. There is no storage class for at least one clone in the target storage domain.
Comment: Clones cannot move to new domain.

CM_BRICK_NORMAL_NOT_POSSIBLE
ShortDescription : Temperature sensors are still over threshold.
LongDescription: Temperature sensors are still over threshold.
Comment: Temperature sensors are still over threshold.

CM_INFILL_EXTENT_CACHE_FULL
ShortDescription : Infill extent cache full.
LongDescription: Infill extent cache full.
Comment: Infill extent cache full.

CM_SLAT_MAX_PERMITTED_CAP_TOO_SMALL
ShortDescription : Storage domain's SLAT max capacity percent is too small.
LongDescription: The desired storage domain's SLAT max capacity is so small that the resulting permitted capacity would be less than the actual current allocated capacity.
Comment: Storage domain's SLAT max capacity percent is too small.

CM_COMMAND_TIMEOUT
ShortDescription : A command to the configuration manager timed out.
LongDescription: A command to the configuration manager timed out.
Comment: The command timed out to conman.

CM_ENCLOSURE_IN_USE
ShortDescription : The Enclosure is busy.
LongDescription: The Enclosure is busy.
Comment: The Enclosure is busy.

COD_CACHE_CHAPTER_FULL
ShortDescription : The COD does not have enough space to store the information with regards to the system configuration.
LongDescription: The COD does not have enough space to store the information with regards to the system configuration. Contact Customer Support.
Comment: COD Cache Chapter is Full, that's bad.

COD_INTERNAL_STRUCTURE_ERROR
ShortDescription : There was an internal failure with COD structures.
LongDescription: There was an internal failure with COD structures. Contact Customer Support.
Comment: CONMAN had an internal issue with COD structures.

COD_LUNS_INSUFFICIENT
ShortDescription : The system does not contain enough available Enclosures to support writing the system configuration.
LongDescription: The system does not contain enough available Enclosures to support writing the system configuration. Check the hardware.
Comment: COD LUNs sufficient, that's bad.

COD_NOT_CONFIGURED
ShortDescription : The system configuration is not yet initialized.
LongDescription: The system configuration is not yet initialized. Check the hardware.
Comment: COD not configured. System is not ready.

COD_READ_FAILURE
ShortDescription : There was a failure in retrieving the system configuration.
LongDescription: There was a failure in retrieving the system configuration from the Enclosures. Check the hardware.
Comment: COD read failure, that's bad.

COD_WRITE_FAILURE
ShortDescription : There was a failure in updating the system configuration.
LongDescription: There was a failure in updating the system configuration on the Enclosures. Check the hardware.
Comment: COD write failure, that's bad.

COLLECT_LOGS_ALREADY_IN_PROGRESS
ShortDescription : The system is already collecting logs.
LongDescription: The system is already collecting logs. Another log collection cannot be started until the current one completes.
Comment: Only one log collection can happen at a time.

COMMAND_ENCOUNTERED_UNEXPECTED_CONDITION_WHILE_EXECUTING
ShortDescription : There was an unexpected issue running the command.
LongDescription: The command-line command returned prematurely with an error. We were unable to correctly process the executables results.
Comment: There was an issue processing and running the command

COMMAND_REQUIRES_SUPPORT_ACCOUNT
ShortDescription : Command can only be executed when authenticated on the Support Account.
LongDescription: This command can only be executed when authenticated on an account with the Support role.
Comment: The command cannot be executed unless authenticated on Support account.

COMMAND_RETURNED_NON_OK_STATUS
ShortDescription : The shell command returned a non-ok status.
LongDescription: The command-line command returned a non-ok status. The command that was run might not have produced the expected results.
Comment: The shell command returned a non-ok status.

COMMAND_TIMEOUT_BUSY
ShortDescription : A command timed out after retrying.
LongDescription: A command timed out after several retries. Please retry at a later time.
Comment: The command timed out even after retrying the max number of times by the JNI.

COMPACT_STORAGEDOMAIN_NOT_CANCELLABLE
ShortDescription : The user cannot cancel the Compact Storage Domain request.
LongDescription: The user cannot cancel the Compact Storage Domain request.
Comment: The user cannot cancel the Compact Storage Domain request.

COMPATIBILITY_MATRIX_PARSING_ERROR
ShortDescription : The compatibility matrix cannot be read correctly.
LongDescription: The compatibility matrix cannot be read properly. Load a new matrix.
Comment: The compatibility matrix cannot be read correctly.

COMPATIBILITY_MATRIX_XML_FAILS_XSD_VALIDATION
ShortDescription : The compatibility matrix is not valid.
LongDescription: The compatibility matrix failed validation and is malformed. Load a new matrix.
Comment: The compatibility matrix is not valid.

COMPLETE_CONTROLLER_FRU_FAILED
ShortDescription : The system could not complete the replacement of a component.
LongDescription: The system could not complete the replacement of a component. Try again, and if the trouble persists, contact Customer Support.
Comment: The system could not complete the replacement of a component.

COMPLIANT_SECURE_WORM_FILESYSTEM_MUST_ALSO_BE_DESIGNATED_SECURE_WORM
ShortDescription : A filesystem designated as compliant secure WORM filesystem must also be designated as secure WORM filesystem.
LongDescription: A filesystem designated as compliant secure WORM filesystem must also be designated as secure WORM filesystem.
Comment: A filesystem designated as compliant secure WORM filesystem must also be designated as secure WORM filesystem.

CONFIGURED_FOR_ANOTHER_APPLIANCE
ShortDescription : The LUN is already configured for another replication appliance.
LongDescription: The LUN is already configured for another replication appliance, try again.
Comment: The LUN already configured for another appliance.

CONFLICTING_EXTENT_MIGRATION_IN_PROGRESS
ShortDescription : A conflicting extent migration in progress
LongDescription: An overlapping extent migration is already running in the affected Storage Domain. Either wait for the current migration to complete or cancel the current running extent migration before submitting your request.
Comment: A conflicting extent migration is in progress

CONMAN_SHUTDOWN_COMMAND_FAILED
ShortDescription : The system is not able to shut down.
LongDescription: The system is not able to shut down. Try again.
Comment: The system is not able to shut down.

CONS_MODE_FAILED
ShortDescription : The system could not prepare a software component for shutdown.
LongDescription: The system could not prepare a software component for shutdown. Try again, and if the trouble persists, contact Customer Support.
Comment: The system could not prepare a software component for shutdown.

CONTROLLER_BUDDY_HBA_DISCREPANCY
ShortDescription : System start-up found an incorrect number of HBAs.
LongDescription: During system start-up, it was discovered that a controller has a different number of HBAs than its buddy.
Comment: System startup found an incorrect number of HBAs.

CONTROLLER_BUDDY_NODE_DISCREPANCY
ShortDescription : The Controller partner node reported by PSG disagrees with value recorded earlier in HWCOD.
LongDescription: The Controller partner node reported by PSG disagrees with value recorded earlier in HWCOD.
Comment: The Controller partner node was reported by PSG disagrees with value recorded earlier in HWCOD.

CONTROLLER_COMMAND_AUTHENTICATION_ERROR
ShortDescription : The system failed to authenticate a Controller command on the Controller.
LongDescription: The system failed to authenticate a Controller command on the Controller.
Comment: The system failed to authenticate a Controller command on the Controller.

CONTROLLER_COMMAND_COMMUNICATION_ERROR
ShortDescription : A communication error occurred while executing the command.
LongDescription: A communication error occurred while executing the command.
Comment: A communication error occurred while executing the command.

CONTROLLER_COMMAND_CONNECTION_ERROR
ShortDescription : The system cannot connect to the Controller to complete a Controller command.
LongDescription: The system cannot connect to the Controller to complete a Controller command.
Comment: The system cannot connect to the Controller.

CONTROLLER_COMMAND_ENVIRONMENT_VARIABLE_MISSING_VALUE
ShortDescription : An environment variable provided to the Controller command is not valid.
LongDescription: An environment variable provided to the Controller command was not assigned a value.
Comment: An environment variable provided to the Controller command is not valid.

CONTROLLER_COMMAND_EXECUTE_ERROR
ShortDescription : An error occurred while executing the command.
LongDescription: An error occurred while executing the command.
Comment: An error occurred while executing the command.

CONTROLLER_COMMAND_ILLEGAL_ARGUMENT
ShortDescription : The argument provided to the Controller command is not valid.
LongDescription: The argument provided to the Controller command is not valid.
Comment: The argument provided to the Controller command is not valid.

CONTROLLER_COMMAND_ILLEGAL_ENVIRONMENT_VARIABLE
ShortDescription : An environment variable provided to the Controller command is not valid.
LongDescription: An environment variable provided to the Controller command is not valid.
Comment: An environment variable provided to the Controller command is not valid.

CONTROLLER_COMMAND_ILLEGAL_ENVIRONMENT_VARIABLE_LIST
ShortDescription : The command's environment variable list is not valid.
LongDescription: The command's environment variable list is not valid.
Comment: The command's environment variable list is not valid.

CONTROLLER_COMMAND_INVALID_ARGUMENT_LIST
ShortDescription : The list of arguments to the Controller command is not valid.
LongDescription: The list of arguments to the Controller command is not valid.
Comment: List of arguments to the Controller command is not valid.

CONTROLLER_COMMAND_INVALID_PARAMETER_FORMAT
ShortDescription : The argument is not formatted correctly.
LongDescription: The argument is not formatted correctly. Either the value of the parameter is not set, or the parameter specified a value when one is not supposed to be specified.
Comment: The argument is not formatted correctly.

CONTROLLER_COMMAND_MISSING_REQUIRED_PARAMETER
ShortDescription : The command is missing a required parameter.
LongDescription: The command is missing a required parameter.
Comment: The command is missing a required parameter.

CONTROLLER_COMMAND_TIMED_OUT
ShortDescription : The command timed out.
LongDescription: The command timed out.
Comment: The command timed out.

CONTROLLER_CONNECTION_LOST
ShortDescription : The command timed out.
LongDescription: The command timed out.
Comment: The command timed out.

CONTROLLER_DOES_NOT_EXIST
ShortDescription : The Controller does not exist.
LongDescription: The Controller does not exist.
Comment: Controller does not exist.

CONTROLLER_FRU_COUNT_INSUFFICIENT
ShortDescription : Coldstart failed because of a problem with a controller's hardware configuration.
LongDescription: Coldstart failed because of a problem with a controller's hardware configuration.
Comment: Coldstart failed because of a problem with a controller's hardware configuration.

CONTROLLER_FRU_INVALID
ShortDescription : Coldstart failed because of a problem with a controller's hardware configuration.
LongDescription: Coldstart failed because of a problem with a controller's hardware configuration.
Comment: Coldstart failed because of a problem with a controller's hardware configuration.

CONTROLLER_FRU_MISMATCH
ShortDescription : Controller Port Provisioning does not match the HBA configuration.
LongDescription: Controller Port Provisioning does not match the HBA configuration.
Comment: Controller FRU does not match.

CONTROLLER_FRU_MISMATCH_INVALID_CONFIG
ShortDescription : Controller Port Provisioning does not match the HBA configuration and the configuration cannot be accepted.
LongDescription: Controller Port Provisioning does not match the HBA configuration and the configuration cannot be accepted.
Comment: Controller FRU does not match and the configuration cannot be accepted.

CONTROLLER_HBA_DOES_NOT_INHABIT_SLOT
ShortDescription : Controller HBA does not exist in the specified slot.
LongDescription: A Controller HBA does not exist in the specified slot. Select a different slot number or add an HBA in the spot specified.
Comment: Controller HBA does not exist in the specified slot.

CONTROLLER_HBA_NOT_MISSING
ShortDescription : Either the controller HBA, or its pair, is not in the "missing" state.
LongDescription: Either the controller HBA, or its pair, is not in the "missing" state, so deletion of HBA cannot proceed.
Comment: Either the controller HBA, or its pair, is not in the "missing" state.

CONTROLLER_INVALID_COMMAND
ShortDescription : Invalid command for controller.
LongDescription: Invalid command for controller.
Comment: Invalid command for controller.

CONTROLLER_MODEL_TYPE_MISMATCH
ShortDescription : The system reported invalid Controller model types.
LongDescription: The system detected either Controllers with different model types or an invalid model type.
Comment: In system coldstart or node rejoin, the system found multiple or invalid Controller model types (AX300/500/600).

CONTROLLER_DIAGNOSTICS_ALREADY_REQUESTED
ShortDescription : Controller diagnostics have already been requested for a node.
LongDescription: Controller diagnostics have already been requested for a node and the diagnostics is only permitted on one node at a time. Wait for the current nodes diagnostics to be completed and then retry your request.
Comment: Controller diagnostics have already been requested for a node.

CONTROLLER_PROM_DISRUPTIVE_UPDATE_FAILED
ShortDescription : The disruptive update of a Controller PROM failed.
LongDescription: The disruptive update of a Controller PROM failed. Try the update again.
Comment: The disruptive update of a Controller PROM failed.

CONTROLLER_VPD_UPDATED_RESTART_REQUIRED
ShortDescription : Controller VPD update succeeded. A restart is required.
LongDescription: Controller VPD update succeeded. A restart is required.
Comment: Controllers VPD update succeeded and a restart is required. The Controller was updated with a 16k License.

CONTROLLER_VPD_UPDATE_FAILED
ShortDescription : Controller VPD update failed.
LongDescription: Controller VPD update failed. Contact Customer Support.
Comment: Controllers VPD were not updated

CONTROLLER_VPD_UPDATE_NAS_NODE_PRESENT
ShortDescription : More Than 8K LUNs license are not allowed with a NAS Controller.
LongDescription: More Than 8K LUNs license are not allowed with a NAS Controller.
Comment: A NAS node not allowed with a 16K license.

CONTROLLER_WARMSTART_FAILED
ShortDescription : The Controller warmstart failed.
LongDescription: The Controller warmstart failed. Try again, and if the trouble persists, contact Customer Support.
Comment: The Controller warmstart failed.

CONTROLLER_WUNAME_MISMATCH
ShortDescription : Controller has the same serial number but a new WWN.
LongDescription: Controller has the same serial number but a new WWN.
Comment: Controller has the same serial number but a new WWN.

COOKIE_FILE_CREATION_FAILED
ShortDescription : The system was unable to create the cookie on the system.
LongDescription: The system was unable to create the cookie on the system. Try again.
Comment: The system was unable to create the cookie file.

COOKIE_FILE_REMOVAL_FAILED
ShortDescription : The system was unable to remove the cookie from the system.
LongDescription: The system was unable to remove the cookie from the system. Try again.
Comment: The system was unable to delete the cookie file.

DATA_CONSISTENCY_VERIFICATION_ERROR
ShortDescription : An error was found during an Enclosure data consistency verification scan.
LongDescription: An error was found during an Enclosure data consistency verification scan.
Comment: An error was found during an Enclosure data consistency verification scan.

DATETIME_INVALID_FORMAT
ShortDescription : Invalid Date Time Format
LongDescription: The date time value specified for the field was in an invalid format.
Comment: This error is intended for use by CSI validation code when the value for a field doesn't conform to a valid date format. The valid format is "yyyy-MM-dd'T'HH:mm:ss.SSS".

DELETE_LOGS_FAILED
ShortDescription : The attempt to delete hardware logs failed.
LongDescription: The attempt to delete hardware logs failed. Most likely, this indicates a failure of the Management Controller's disk drive.
Comment: Thee request to delete some set of logs failed.

DELETE_LOG_BUNDLE_FAILED
ShortDescription : The delete of a bundle to Pilot persistence failed.
LongDescription: The delete of a bundle to Pilot persistence failed.
Comment: The delete of a log bundle failed.

DEPENDENT_SUPER_COMMAND_OPS
ShortDescription : One or more operations in a super command are dependent.
LongDescription: One or more operations in a super command are dependent. For example, two different operations in a super command are trying to create partial snapshots from the same head of cascade. Contact Customer Support.
Comment: One or more operations in a super command are dependent. For example, two different operations in a super command are trying to create partial snapshots from the same head of cascade.

DESTINATION_DRIVE_GROUP_MUST_BE_IN_NORMAL_STATE
ShortDescription : The destination drive group must be in the Normal state.
LongDescription: The destination drive group must be in the Normal state.
Comment: The destination drive group must be in the Normal state.

DESTINATION_DRIVE_GROUP_MUST_BE_ON_DIFFERENT_ENCLOSURE
ShortDescription : The destination drive group must be on a different Enclosure than the source.
LongDescription: The destination drive group must be on a different Enclosure than the source.
Comment: The destination drive group must be on a different Enclosure than the source.

DISRUPTIVE_UPDATE_REQUIRED
ShortDescription : The software update requested requires the data access disruption. All forced updates must also be disruptive.
LongDescription: The software update requested requires the data access disruption. Use the Restart and update software option to allow data access disruption during the software update. Note that all forced updates must also specify the update as disruptive.
Comment: The software update requested requires data access disruption.

DOUBLE_REDUNDANCY_AND_ENABLED_WIDE_STRIPING_NOT_VALID
ShortDescription : Double redundancy and enabling wide striping is not valid.
LongDescription: When creating a performance profile, you cannot set the redundancy to double and enable wide striping across all Enclosures.
Comment: The system cannot create a performance profile with redundancy set to Double and Enable Wide Striping set to True across all Enclosures.

DRIVE_ACCEPT_UNSUCCESSFUL
ShortDescription : Drive Accept did not succeed based on status after accept sent to Enclosure.
LongDescription: Drive Accept did not succeed based on status after accept sent to Enclosure.
Comment: Drive Accept did not succeed based on status after accept sent to Enclosure.

DRIVE_FIRMWARE_NOT_ALLOWED
ShortDescription : Drive firmware was specified for update. Use drive firmware upgrade to update drives.
LongDescription: Drive firmware was specified for update. Use drive firmware upgrade to update drives.
Comment: Drive firmware was specified for update. Use drive firmware upgrade to update drives.

DRIVE_GROUP_DOES_NOT_EXIST
ShortDescription : The Drive Group cannot be found.
LongDescription: The Drive Group cannot be found. Check the status of the Drive Group.
Comment: The Drive Group does not exist.

DRIVE_DOES_NOT_EXIST
ShortDescription : The specified drive does not exist.
LongDescription: The specified drive does not exist.
Comment: The specified drive does not exist.

DRIVEGROUP_BELONGS_TO_STORAGEDOMAIN
ShortDescription : The drive group cannot be added to a storage domain.
LongDescription: The drive group cannot be added to a storage domain because it already belongs to a storage domain.
Comment: The drive group cannot be added to a storage domain.

DRIVE_GROUP_MARKED_FOR_REMOVAL
ShortDescription : The drive group cannot be used.
LongDescription: The drive group cannot be used because it has been removed from the system.
Comment: The drive group cannot be used.

DRIVE_GROUP_MISPLACED
ShortDescription : A drive group has been moved to an incorrect enclosure chain.
LongDescription: A drive group has been moved to an incorrect enclosure chain.
Comment: A drive group has been moved to an incorrect enclosure chain.

DRIVE_GROUP_MUST_BE_IN_A_STORAGE_DOMAIN
ShortDescription : The destination drive group must be in a Storage Domain.
LongDescription: The destination drive group must be in a Storage Domain.
Comment: The destination drive group must be in a Storage Domain.

DRIVE_GROUP_NOT_FOUND
ShortDescription : The specified drive group was not discovered in the Controller-to-Enclosure fabric network.
LongDescription: The specified drive group was not discovered in the Controller-to-Enclosure fabric network. Check the status of the Enclosure. If the problem persists, contact Customer Support.
Comment: The specified drive group was not discovered in the PI network.

DRIVE_GROUP_OFFLINE
ShortDescription : A drive group is offline.
LongDescription: The operation failed because it targets a drive group that is offline. Please repair the drive group and try again.
Comment: A drive group is offline.

DRIVE_STATUS_PREVENTS_HDD_FW_UPDATE
ShortDescription : Disk drive firmware update failed due to the current Enclosure or drive status.
LongDescription: Disk drive firmware update failed due to the current Enclosure or drive status.
Comment: The Enclosure or drive status prevents an HDD firmware update.

DUPLICATE_ACCOUNT_IN_ACL
ShortDescription : An account was added twice to the list in ACLs.
LongDescription: That account already exists in the ACL. It does not need to be added again.
Comment: An account was added twice to the list in ACLs.

DUPLICATE_APM_HOSTS_CONNECTED
ShortDescription : Two different FSPM sessions are authenticated and are associated to the same host.
LongDescription: There are two different FSPM sessions authenticated in the system, both sessions are associated to a single SAN Host. This means there are either two FSPM hosts with identical names, or a host failed to authenticate before re-authenticating with the system.
Comment: Two different FSPM sessions exist associated to the same host.

DUPLICATE_DISPLAY_NUMBER
ShortDescription : An object with the given display number already exists.
LongDescription: An object with the given display number already exists.
Comment: An attempt was made to create or modify an object to the same display number as an existing object.

DUPLICATE_HTTP_HOST
ShortDescription : An HTTP host with the given settings already exists.
LongDescription: An HTTP host with the given settings already exists.
Comment: An attempt was made to create or modify an HTTP host with the same name as an existing one.

DUPLICATE_INITIATOR_PORT
ShortDescription : An initiator port has been specified more than once.
LongDescription: An initiator port has been specified more than once.
Comment: An initiator port has been specified more than once.

DUPLICATE_LUN_LUID
ShortDescription : The LUN luid specified already exists.
LongDescription: The LUN luid specified already exists. If this problem persists, contact Customer Support.
Comment: The specified LUN luid already exists. We generate the luid so something is up.

DUPLICATE_NAME
ShortDescription : An object with the given name already exists.
LongDescription: An object with the given name already exists.
Comment: An attempt was made to create or modify an object with the same name as an existing object.

DUPLICATE_NDMP_SERVER_PORT_NUMBER
ShortDescription : An NDMP server port with the given port number already exists.
LongDescription: An NDMP server port with the given port number already exists.
Comment: An attempt was made to create or modify an NDMP server port with the same port number as an existing port.

DUPLICATE_SNMP_HOST
ShortDescription : An SNMP host with the given settings already exists.
LongDescription: An SNMP host with the given settings already exists.
Comment: An attempt was made to create or modify an SNMP host with the same name as an existing one.

DUPLICATE_STORAGE_CLASS_IN_LIST
ShortDescription : A storage class in a list was duplicated.
LongDescription: A storage class in a list was duplicated.
Comment: A storage class in a list was duplicated.

DUPLICATE_TIER_IN_FILESYSTEM
ShortDescription : A duplicate filesystem tier exists within the filesystem.
LongDescription: Attempt to add filesystem tier to a filesystem in which a tier with that name already exists.
Comment: Attempting to create (or modify) a filesystem tier within a filesystem that already has a tier of the same name.

DUPLICATE_UPS_DEVICE_IP_ADDRESS
ShortDescription : A UPS device with the given settings already exists.
LongDescription: A UPS device with the given settings already exists.
Comment: An attempt was made to create or modify a UPS device with the same IP address as an existing one.

DUPLICATE_UPS_DEVICE_NAME
ShortDescription : A UPS device with the given settings already exists.
LongDescription: A UPS device with the given settings already exists.
Comment: An attempt was made to create or modify a UPS device with the same name as an existing one.

DUPLICATE_VIF
ShortDescription : Duplicate VIFs are not allowed
LongDescription: A VIF exists with the chosen IP address. Select a different IP address.
Comment: Duplicate VIFs are not allowed.

DUPLICATE_VOLUME_GROUP
ShortDescription : Two volume groups cannot exist in the system with the same ID or same name.
LongDescription: Two volume groups cannot exist in the system with the same ID or same name.
Comment: Duplicate volume group IDs were found by Allocation Manager.

DUPLICATE_VOLUME_IN_ACL
ShortDescription : The volume already exists in the ACL.
LongDescription: The volume already exists in the ACL. It does not need to be added again.
Comment: A volume was added twice to the list in ACLs.

DUPLICATE_VOLUME_IN_VOLUMEGROUP
ShortDescription : A duplicate volume exists in the volume group.
LongDescription: Attempt to add a volume to a volume group in which a volume with that name already exists.
Comment: Volumes within a volume group must have unique names.

EEPROM_READ_FAILED
ShortDescription : The system failed to read the disk drive EEPROM.
LongDescription: The system failed to read the disk drive EEPROM.
Comment: The system failed to read the drive EEPROM

EITHER_ALL_OR_NO_TIERS_MUST_HAVE_REPOSITORY
ShortDescription : Either all tiers must have repositories, or no tiers can have repositories.
LongDescription: Either all tiers must have repositories, or no tiers can have repositories.
Comment: Either all tiers must have repositories, or no tiers can have repositories.

EITHER_PERFORMANCE_PROFILE_OR_QOS_VALUES_MUST_BE_PROVIDED
ShortDescription : Either performance profile or QoS values must be provided.
LongDescription: Either performance profile or QoS values must be provided.
Comment: Either performance profile or QoS values must be provided.

ELEMENT_VERSION_MISMATCH
ShortDescription : An element version mismatch occurred.
LongDescription: The error is generally caused by a mismatch in versions between the server and the client.
Comment: The version mismatch error is intended for use by CSI validation code when the version for an element doesn't match what is expected.

EMAIL_NOT_ENABLED
ShortDescription : Email has been disabled.
LongDescription: The email request was not sent. Email server support is not enabled.
Comment: Email disabled is only an error for commands explicitly sending email (for example, TEST_EMAIL).

EMAIL_SEND_FAILED
ShortDescription : The email send failed.
LongDescription: The system is unable to send an email message. An SMTP server was not found or it is not functioning.
Comment: Email settings look OK, but a send failure was reported by SMTP server.

EMAIL_SUBSCRIPTION_REQUIRES_AT_LEAST_ONE_FILTER
ShortDescription : An email subscription requires at least one event ID or Severity/Category.
LongDescription: An email subscription requires at least one event ID or Severity/Category.
Comment: An email subscription requires at least one filter.

EMPTY_USER_NAME
ShortDescription : The specified user name is empty.
LongDescription: The user name is not allowed to be empty. Enter a user name.
Comment: The user name specified is empty.

ENUM_VALUE_DISALLOWED
ShortDescription : The enum value is not valid in this context.
LongDescription: The enum value is not valid in this context.
Comment: The enum value is not valid in this context

ERROR_TOO_FEW_ENCLOSURES_FOR_PRIMARY
ShortDescription : The system cannot remove the Enclosure from the Storage Domain.
LongDescription: The Storage Domain in which the Enclosure resides is used to store system configuration and setting information. Removing this Enclosure will leave insufficient redundancy for this data.
Comment: The system is attempting to remove an Enclosure from a primary Storage Domain so that there is insufficient redundancy for COD and NP.

EVENT_PERSISTENCE_INITIALIZATION_FAILED
ShortDescription : Event persistence failed while initializing.
LongDescription: Event persistence was not properly initialized and cannot properly store events or properly respond to queries for events.
Comment: Event persistence initialization failed.

EVENT_PERSISTENCE_QUERY_FAILED
ShortDescription : The query to event persistence failed.
LongDescription: An error occurred running the query in event persistence. The result set returned might not contain the correct set of events.
Comment: The query from event persistence failed.

EXPIRED_TOKEN
ShortDescription : The token has expired.
LongDescription: The token has expired.
Comment: The token has expired.

EXTENT_MIGRATION_DOES_NOT_EXIST
ShortDescription : The extent migration could not be found.
LongDescription: The requested extent migration could not be found.
Comment: The extent migration could not be found.

FAILED_TO_CREATE_FILE_FOR_DOWNLOAD
ShortDescription : The system failed to create a file for download.
LongDescription: The requested download file could not be created. If the problem persists while using the force flag, contact Oracle Customer Support.
Comment: The system failed to create a file for download.

FAILED_TO_DELETE_GLOBAL_MAPS_BEFORE_CREATING_HOST_MAP
ShortDescription : The system cannot delete existing global LUN maps prior to creating a SAN host LUN map.
LongDescription: During the creation of a host mapped LUN map, all existing global maps for that LUN must be deleted. The operation cannot delete the global maps and the SAN host LUN map was not created.
Comment: The system cannot delete existing global LUN maps prior to creating a SAN host LUN map.

FAILED_TO_DELETE_HOST_LUN_MAP_AFTER_CREATING_GLOBAL_MAP
ShortDescription : The system cannot delete existing host LUN maps after creating a global LUN map.
LongDescription: During the creation of a global LUN map, all existing host LUN maps for that LUN must be deleted. The operation cannot delete the host LUN maps after the global LUN maps were created. The maps need to be manually cleaned up.
Comment: The system cannot delete existing host LUN maps after creating a global LUN map.

FAILED_TO_DRAIN_OPERATION_POOL
ShortDescription : The system cannot drain the operation pool.
LongDescription: Outstanding requests that are in the operation pool need to be drained prior to starting a software update or shutting down the system. The operation pool is considered drained when all operations have been completed, or the operations that remain to be executed are permitted during a software update or system shutdown. Use the appropriate force flag to cancel any pending operations. In the GUI, select "Ignore ongoing requests, force Pilot shutdown and continue the software update process." If the problem persists while using the force flag, contact Oracle Customer Support.
Comment: The system cannot drain the operation pool.

FAILED_TO_PUSH_EVENTS_TO_PERSISTENCE
ShortDescription : The server failed to push the contents of the events cache to event persistence.
LongDescription: Periodically, the server pushes the contents of the event's cache to persistence and occasionally there is an error writing the events into persistence. This error means that some events were not stored on-disk for permanent storage. If this becomes a recurring issue, there might be an issue with the Pilot's event persistence and Customer Support should be contacted.
Comment: The server failed to push the contents of the events cache to event persistence.

FAILED_TO_REPLACE_FILE_ON_DISK_WITH_PACKAGED_FILE
ShortDescription : The system failed to move a file from the temporary location to the persistence location.
LongDescription: The system failed to move the file from the temporary location to the persistence location.
Comment: The system failed to move the file from the temporary location to the persistence location.

FAILED_TO_RESET_EVENT_LOG
ShortDescription : The event log cannot be reset.
LongDescription: An error occurred while resetting the event log.
Comment: The server failed to reset the event log.

FAILED_TO_UPDATE_HDD_FW_UPDATE_COOKIE
ShortDescription : The system failed to update HDD firmware update cookie.
LongDescription: After preparing the system to perform a disruptive HDD firmware upgarde, we failed to update a critical Pilot cookie. The update cannot be safely carried out and the Pilot must end the update attempt. Contact Customer Support.
Comment: The system failed to update HDD firmware update cookie.

FAILED_TO_UPDATE_LUN_DURING_CREATE_GLOBAL_LUN_MAP
ShortDescription : The system cannot update the LUN to specify that it is globally mapped.
LongDescription: After creating all of the global LUN mappings, the LUN was not updated to reflect that it is globally mapped.
Comment: The system cannot update the LUN to specify that it is globally mapped.

FAILED_TO_UPDATE_LUN_DURING_DELETE_GLOBAL_LUN_MAP
ShortDescription : The system cannot update the LUN to specify that it is not globally mapped.
LongDescription: After deleting all of the global maps, the LUN was not updated to reflect that it is no longer globally mapped.
Comment: The system cannot update the LUN to specify that it is not globally mapped.

FAILED_TO_UPDATE_LUN_DURING_MODIFY_GLOBAL_LUN_MAP
ShortDescription : The system cannot update the LUN to configure its new LUN number.
LongDescription: The system cannot update the LUN to configure its new LUN number.
Comment: The system cannot update the LUN to configure its new LUN number.

FAILOVER_SEQUENCE_DIFFERS_FROM_SOURCE
ShortDescription : The failover list for a copy or clone cannot be different than the source volume.
LongDescription: The failover list for a copy or clone cannot be different than the source volume.
Comment: The specified failover list cannot be different than the source volume.

FCP_LICENSE_REQUIRED
ShortDescription : This request requires a Fibre Channel Protocol license.
LongDescription: This request requires a Fibre Channel Protocol license. Install the required license.
Comment: This request requires a Fibre Channel Protocol license.

FCP_VOLUME_EXISTS_CANNOT_DELETE_LICENSE
ShortDescription : The Fiber Channel Protocol feature license cannot be deleted.
LongDescription: The system cannot delete Fibre Channel Protocol license until after all LUNs and LUN clones have been deleted.
Comment: The Fiber Channel Protocol feature license cannot be deleted while a LUN or LUN clone exists on the system.

FILESERVER_DNS_MISSING_IP_ADDRESS
ShortDescription : At least one IP address must be provided for DNS configuration.
LongDescription: At least one IP address must be provided for DNS configuration when a domain name is provided.
Comment: If a DNS Domain is provided, at least one DNS Server IP address must also be provided.

FILESERVER_NIS_MISSING_IP_ADDRESS
ShortDescription : At least one IP address must be provided for NIS configuration.
LongDescription: At least one IP address must be provided for NIS configuration when a domain name is provided.
Comment: If an NIS Domain is provided, at least one NIS Server IP address must also be provided.

FILESERVER_LDAP_MISSING_URI
ShortDescription : At least one URI must be provided for LDAP configuration.
LongDescription: At least one URI must be provided for LDAP configuration when a domain name is provided.
Comment: If an LDAP Domain is provided, at least one LDAP URI must also be provided.

FILESERVER_DOES_NOT_EXIST
ShortDescription : The specified File Server does not exist.
LongDescription: The specified File Server does not exist. Try again.
Comment: The File Server does not exist.

FILESERVER_HAS_CIFS_CANNOT_DELETE_LICENSE
ShortDescription : The CIFS feature license cannot be deleted.
LongDescription: The CIFS feature license cannot be deleted when there are one more File Servers with CIFS configured.
Comment: The CIFS feature license cannot be deleted when there are one more File Servers with CIFS configured.

FILESERVER_HAS_NFS_CANNOT_DELETE_LICENSE
ShortDescription : The NFS feature license cannot be deleted.
LongDescription: The NFS feature license cannot be deleted when there are one more File Servers with NFS configured.
Comment: The NFS feature license cannot be deleted when there are one more File Servers with NFS configured.

FILESYSTEM_CANNOT_ACCESS_FILE_SERVER
ShortDescription : The filesystem must reside on the same Controller as the File Server.
LongDescription: The filesystem must reside on the same Controller as the File Server.
Comment: The filesystem must reside on the same Controller as the File Server.

FILESYSTEM_CLONE_EXISTS_CANNOT_DELETE_LICENSE
ShortDescription : The system cannot delete a filesystem clone license.
LongDescription: The system cannot delete a filesystem clone license until all filesystem clones have been deleted.
Comment: The system cannot delete filesystem clone license until all filesystem clones have been deleted.

FILESYSTEM_CLONE_LICENSE_REQUIRED
ShortDescription : This request requires a filesystem clone license.
LongDescription: This request requires a filesystem clone license. Install the required license.
Comment: This request requires a filesystem clone license.

FILESYSTEM_DOES_NOT_EXIST
ShortDescription : The specified filesystem does not exist.
LongDescription: The specified filesystem does not exist. Try again.
Comment: Filesystem does not exist

FILESYSTEM_IS_READ_ONLY
ShortDescription : The operation cannot be completed because the filesystem is in a read-only state.
LongDescription: The operation cannot be completed because the filesystem is in a read-only state. Check the hardware and try again.
Comment: The filesystem is in a read-only state.

FILESYSTEM_MUST_BE_OFFLINE
ShortDescription : The filesystem must be offline.
LongDescription: The filesystem must be offline to perform this operation.
Comment: The filesystem must be offline to perform this operation.

FILESYSTEM_NOT_COMPLIANT
ShortDescription : The filesystem is not a compliant SecureWORMfs filesystem.
LongDescription: The filesystem is not a compliant SecureWORMfs filesystem.
Comment: The filesystem is not a compliant SecureWORMfs filesystem.

FILESYSTEM_NOT_EMPTY
ShortDescription : An immutable filesystem is not empty and cannot be deleted.
LongDescription: An immutable filesystem must be empty before it can be deleted.
Comment: An attempt was made to delete a volume-immutable filesystem that is not empty.

FILESYSTEM_SNAPSHOT_DOES_NOT_EXIST
ShortDescription : The specified filesystem snapshot does not exist.
LongDescription: The specified filesystem snapshot does not exist. Try again.
Comment: A filesystem snapshot does not exist.

FILESYSTEM_SNAPSHOT_RESTORE_IN_PROGRESS
ShortDescription : The filesystem operation cannot be performed while a snapshot restore is in progress.
LongDescription: The filesystem operation cannot be performed while a snapshot restore is in progress.
Comment: The filesystem operation cannot be performed while a snapshot restore is in progress.

FILESYSTEM_THIN_PROVISIONING_LICENSE_REQUIRED
ShortDescription : This request requires a Filesystem Thin Provisioning license.
LongDescription: This request requires a Filesystem Thin Provisioning license. Install the needed license.
Comment: This request requires a Filesystem Thin Provisioning license.

FILESYSTEM_TIER_DOES_NOT_BELONG
ShortDescription : The specified filesystem tier does not belong to the specified filesystem.
LongDescription: The specified filesystem tier does not belong to the specified filesystem.
Comment: The specified filesystem tier does not belong to the specified filesystem.

FILE_NOT_FOUND
ShortDescription : The file cannot be found.
LongDescription: The file cannot be found. Enter a different filename and path.
Comment: The file and path cannot be found.

FILE_SERVER_REQUIRED_TO_RESOLVE_USER_AND_GROUP_QUOTA_NAMES
ShortDescription : A File Server must be specified in order to resolve user and group quota names.
LongDescription: A File Server must be specified in order to resolve user and group quota names.
Comment: A File Server must be specified in order to resolve user and group quota names.

FILE_TOO_LARGE_FOR_UPLOAD
ShortDescription : The specified file is too large for upload.
LongDescription: The specified file is too large for upload.
Comment: The file is too large for upload.

FORCED_FLAG_NOT_PERMITTED_DURING_NON_DISRUPTIVE_UPDATE
ShortDescription : The specified flags are not permitted during a non-disruptive update.
LongDescription: The specified flags are not permitted during a non-disruptive update.
Comment: The specified forced flag is not permitted during a non-disruptive update.

FORCED_SHUTDOWN_REQUIRED_CONSERVATIVE_STATE_ERROR
ShortDescription : The Oracle FS System cannot be cleanly shutdown because the data volumes cannot successfully be transitioned to a conservative state.
LongDescription: The Oracle FS System cannot be cleanly shutdown because the data volumes cannot successfully be transitioned to a conservative state. An update can be forced by disregarding the system hardware state. Pilots must both be Normal. A forced shutdown can result in data loss.
Comment: The shutdown request must send down a force flag to proceed.

FORCED_SHUTDOWN_REQUIRED_DISABLED_NODES
ShortDescription : The Oracle FS System cannot be cleanly shutdown.
LongDescription: The Oracle FS System cannot be cleanly shutdown. A Controller might be disabled or a Pilot status might be unknown. An update can be forced by disregarding the system hardware state. Pilots must both have a status of Normal. A forced shutdown can result in data loss.
Comment: The shutdown request must send down a force flag to proceed.

FORCED_SHUTDOWN_REQUIRED_INVALID_STATE
ShortDescription : The Oracle FS System cannot be cleanly shutdown because the system is in a state that cannot successfully be transitioned to a conservative state.
LongDescription: The Oracle FS System cannot be cleanly shutdown because the system is in a state that cannot successfully be transitioned to a conservative state. A forced shutdown can result in data loss.
Comment: The shutdown request must send down a force flag to proceed.

FORCED_UPDATE_REQUIRED_NOT_NORMAL_SYSTEM_STATE
ShortDescription : The Oracle FS System cannot perform the requested software update because the Oracle FS System is not in a Normal state.
LongDescription: The Oracle FS System cannot perform the requested software update because the Oracle FS System is not in a Normal state. An update can be forced by disregarding the system hardware state. Pilots must both be Normal. A forced update can result in data loss.
Comment: The update request must send down a force flag to proceed.

FORCED_UPDATE_REQUIRED_PINNED_DATA_FOUND
ShortDescription : The Oracle FS System cannot cleanly perform the requested software update because the Oracle FS System is detecting pinned data within the data volumes.
LongDescription: The Oracle FS System cannot cleanly perform the requested software update because the Oracle FS System is detecting pinned data within the data volumes. An update can be forced by forcing the Controller software to shutdown regardless of failures. A forced update can result in data loss.
Comment: The update request must send down a force flag to proceed.

FORCED_UPDATE_REQUIRED_SYSTEM_ALERT_EXISTS
ShortDescription : The system cannot proceed with update because a system alert exists.
LongDescription: The system cannot perform the update request because there is an outstanding system alert. The alert needs to be resolved, deleted, or the update needs to set the "Ignore System Alerts" flag.
Comment: The update request must send down an ignore system alerts or delete alerts.

FRU_GM_ALREADY_IN_PROGRESS
ShortDescription : The system has already been prepared replacing a component.
LongDescription: The system has already been prepared replacing a component. Finish or cancel ongoing component replacement and try again.
Comment: The system has already been prepared for replacing a component.

FRU_IDENTIFY_FAILED
ShortDescription : The FRU identify request failed.
LongDescription: The FRU identify request failed. This can be due to a hardware problem. Try again. If the problem persists, contact Customer Support.
Comment: The FRU identify operation failed.

FRU_INVALID
ShortDescription : The FRU is not valid.
LongDescription: The FRU is not valid.
Comment: The FRU is not valid.

FRU_STATE_NOT_PREPARABLE
ShortDescription : The system could not prepare a component for replacement.
LongDescription: The system could not prepare a component for replacement. Try again, and if the problem persists, contact Customer Support.
Comment: The system could not prepare a component for replacement.

FWUP_REJECT_DIFF_OP_RUNNING
ShortDescription : A different firmware update operation already had the lock, so this request was rejected.
LongDescription: A different firmware update operation already had the lock, so this request was rejected. Wait until this operation completes.
Comment: A different firmware update operation already had the lock, so this request was rejected.

GARBLED_MESSAGE_ERROR
ShortDescription : A client request cannot be parsed.
LongDescription: The incoming client-server interface message was garbled and is unparsable. This is possibly caused by a mismatch in versions between the Pilot software and the client. Contact Customer Support.
Comment: The CSI message cannot be parsed.

GDM_PORTS_ARE_NOT_CONNECTED
ShortDescription : The traffic generator cannot be invoked.
LongDescription: The traffic generator cannot be invoked because the SAS ports that should be connected from one controller to another are not connected.
Comment: GDM Ports are not connected.

GENERIC_TIMEOUT
ShortDescription : The command timed out.
LongDescription: The requested command timed out.
Comment: The command timed out.

GSM_INCOMPATIBLE_VERSIONS_DETECTED
ShortDescription : >An incompatible set of GSM components for installation have been detected.
LongDescription: >An incompatible set of GSM components for installation have been detected.
Comment: An incompatible set of GSM components for installation have been detected.

GSM_SOFTWARE_VERSIONS_OUT_OF_SYNC
ShortDescription : >GSM software component versions are out of sync between FS pilots.
LongDescription: >GSM software component versions are out of sync between FS pilots. Contact customer support.
Comment: GSM software component versions are out of sync between FS pilots.

GSM_UPDATE_NOT_REQUIRED
ShortDescription : All staged GSM components are already installed.
LongDescription: All staged GSM components are already installed.
Comment: All staged GSM components are already installed.

HALT_POINT_HIT
ShortDescription : A halt point was encountered and the system startup has been paused.
LongDescription: A halt point was set and system startup has stopped at the specified halt point.
Comment: A halt point was encountered.

HARDWARE_DOES_NOT_WORK_WITH_SOFTWARE
ShortDescription : A version of the hardware does not work with a version of the software.
LongDescription: A version of the hardware does not work with a version of the software. Check the hardware and software or load a new matrix.
Comment: A version of hardware does not work with a version of software.

HARDWARE_WORKS_WITH_NOT_DEFINED
ShortDescription : A valid hardware identification section is not defined for the software update.
LongDescription: The compatibility matrix specifies which hardware works with a particular software component. This software update does not contain the proper information to indicate which hardware works with this software update. Check the package and try again.
Comment: A valid hardware identification section is not defined for the software update.

HDD_FIRMWARE_INCLUDED
ShortDescription : A software update incorrectly included disk drive firmware.
LongDescription: A software update included disk drive firmware, but the validation information for the package indicated that no disk drive firmware update should be present. A disk drive software update package is required for a disk drive update.
Comment: A software update incorrectly included disk drive firmware.

HDD_FIRMWARE_UPDATE_NOT_REQUIRED
ShortDescription : All hard drives on the system are up-to-date.
LongDescription: The hard drives on the system do not require an update. All drives are up-to-date according to the package that is staged on the system.
Comment: HDD firmware update not required.

HDD_FW_DOES_NOT_MATCH
ShortDescription : The disk drive firmware update failed.
LongDescription: The disk drive firmware update failed. The disk drive firmware does not match the expected version.
Comment: After the HDD firmware update, the drive firmware does not match target version.

HDD_FW_UPDATE_FAILED_LUN_OFFLINE
ShortDescription : The system failed to take an Enclosure offline.
LongDescription: The system failed to take an Enclosure offline.
Comment: The system failed to take an Enclosure offline.

HDD_FW_UPDATE_FAILED_LUN_ONLINE
ShortDescription : The system failed to bring an Enclosure online.
LongDescription: The system failed to bring an Enclosure online.
Comment: The system failed to bring an Enclosure online.

HDD_FW_UPDATE_IMAGE_STAGE_FAILED
ShortDescription : The system failed to stage disk drive firmware.
LongDescription: The system failed to stage disk drive firmware.
Comment: The drive firmware staging failed.

HEAD_OF_TREE_FILESYSTEM_OFFLINE
ShortDescription : The head of tree filesystem is offline.
LongDescription: The head of tree filesystem is offline.
Comment: The head of tree filesystem is offline.

HEAD_OF_TREE_FILESYSTEM_TIER_OFFLINE
ShortDescription : The head of tree filesystem tier is offline.
LongDescription: The head of tree filesystem tier is offline.
Comment: The head of tree filesystem tier is offline.

HEAD_OF_TREE_LUN_OFFLINE
ShortDescription : The head of tree LUN is offline.
LongDescription: The head of tree LUN is offline.
Comment: The head of tree LUN is offline.

HOST_ALREADY_IN_HOST_GROUP
ShortDescription : The specified host is already in a host group.
LongDescription: The specified host is already in a host group. Hosts can be in only one host group.
Comment: The specified host is already in a host group.

HOST_GROUP_DOES_NOT_EXIST
ShortDescription : The specified host group does not exist.
LongDescription: The specified host group does not exist. A host group is required for a host group LUN map.
Comment: The specified host group does not exist.

HOST_GROUP_NAME_ALREADY_IN_USE
ShortDescription : The specified host group name is already in use.
LongDescription: The specified host group name is already in use. Choose a different name for the host group.
Comment: The specified host group name is already in use.

HOST_MAPPING_CONFLICTS_WITH_HOST_GROUP_MAPPING
ShortDescription : The specified host has at least one mapping that conflicts with a mapping in the host group.
LongDescription: The specified host has at least one mapping that conflicts with a mapping in the host group. Either two LUNs share the same LUN number, or two LUN numbers refer to the same LUN. Modify or delete mappings of the host before associating it to the host group.
Comment: The specified host has at least one mapping that conflicts with a mapping in the host group.

HPUX_HOST_CANNOT_HAVE_LUN0_MAPPED
ShortDescription : A LUN may not be mapped to LUN number 0 on a host which is in HP-UX mode.
LongDescription: A LUN may not be mapped to LUN number 0 on a host which is in HP-UX mode, i.e. any of its initiator ports is HP-UX addressing.
Comment: A LUN may not be mapped to LUN number 0 on a host which is in HP-UX mode.

HTTPS_CONNECTION_FAILURE
ShortDescription : The Call-Home operation was not able to connect to the HTTPS server.
LongDescription: The Call-Home operation was not able to connect to the HTTPS server, verify the server is correct and try again.
Comment: The Call-Home operation was not able to connect to the HTTPS server.

HTTPS_UNKNOWN_HOST_FAILURE
ShortDescription : The Call-Home operation was not able resolve the HTTPS server.
LongDescription: The Call-Home operation was not able to resolve the HTTPS server. Verify that the HTTPS server is correct and try again.
Comment: The Call-Home operation was not able to connect to resolve HTTPS server.

HTTP_TRANSFER_FAILURE
ShortDescription : The transfer of the Call-Home bundle over HTTPS encountered an error.
LongDescription: The transfer of the Call-Home bundle over HTTPS encountered an error.
Comment: The transfer of the Call-Home bundle over HTTPS encountered an error.

IDENTIFIER_INVALID_SSN
ShortDescription : The wrong SSN within the ID was sent to the server.
LongDescription: The wrong SSN within the ID was sent to the server.
Comment: The wrong SSN within the ID was sent to the servers

IDENTIFIER_NOT_FOUND
ShortDescription : The object was not found.
LongDescription: The object does not exist. Make sure that you specify an object that is configured on the Oracle FS System.
Comment: Register this error against ID fields that are not found within the specific domain manager. This error is not to be used at the request level.

ILLEGAL_QOS_PRIORITY_FOR_STORAGE_DOMAIN
ShortDescription : The LUN cannot be created because the priority band specified is not valid.
LongDescription: The priority band is not valid for the Storage Domain specified by the LUN or tier.
Comment: The priority band is not valid for the Storage Domain specified by the LUN or tier.

INCOMPATIBLE_ENCLOSURE
ShortDescription : The new Enclosure cannot be used to replace one of the Enclosures in the system.
LongDescription: The new Enclosure in a replace Enclosure operation is not the same type as the old Enclosure, or the old Enclosure size is larger than the new Enclosure.
Comment: The new Enclosure in a replace Enclosure is not the same type as the old Enclosure, or the old Enclosure size is larger than the new Enclosure.

INCOMPATIBLE_STORAGE_CLASS_RAID_COMBINATION
ShortDescription : The Storage Class and RAID Level values are incompatible.
LongDescription: The Storage Class and RAID Level values are incompatible.
Comment: The specified Storage Class and RAID Level values are incompatible.

INCOMPATIBLE_HARDWARE_SOFTWARE
ShortDescription : An incompatibility exists between a version of component software and a version of hardware.
LongDescription: The system has detected an incompatibility between a software component and the system hardware. Check the software package and hardware and try again.
Comment: An incompatibility exists between a version of component software and a version of hardware.

INCONSISTENT_PROVISIONINGS_ACROSS_PORTS_ON_HBA
ShortDescription : Port provisionings are inconsistent across the ports on an HBA.
LongDescription: All ports on a given HBA must be provisioned the same. The provisioning request specified provisionings that do not match.
Comment: Port provisionings are inconsistent across the ports on an HBA.

INITIATOR_ALREADY_ATTACHED_TO_LUN
ShortDescription : The requested initiator is already attached to the LUN.
LongDescription: The requested initiator is already attached to the LUN. Check the identifiers for each.
Comment: A map already exists between the initiator and the LUN, so a new one cannot be created. The map must be modified or deleted.

INITIATOR_REDISCOVERY_ALREADY_IN_PROGRESS
ShortDescription : Initiator rediscovery is already in progress.
LongDescription: The system is already collecting logs. An initiator discover is already in progress. Initiator discover can happen one of two ways. First, the system periodically rediscovers, and second an administrator can request to get the current list of SAN hosts. We only allow one discover at a time, so when this error is seen, a discover was already in progress. Wait for the current discover to complete and try your request again.
Comment: An initiator rediscovery is already in progress.

INSTRUCTION_ALWAYS_INSTALL_REQUIRED
ShortDescription : "Always install" is required.
LongDescription: The component being requested for the upgrade is an older version than the component that is installed. The request requires that the component installation instruction choice be "Always install".
Comment: To install this component, you must use "always install."

INSUFFICIENT_ENCLOSURES_FOR_SYSTEM_START
ShortDescription : There are too few Enclosures to start the system.
LongDescription: There are too few Enclosures to start the system.
Comment: There are too few Enclosures to start the system.

INSUFFICIENT_ENCLOSURES_TO_CREATE_ANOTHER_STORAGE_DOMAIN
ShortDescription : The system contains an insufficient number of Enclosure to create another Storage Domain.
LongDescription: The system contains an insufficient number of Enclosure to create another Storage Domain.
Comment: There are too few Enclosures to create another Storage Domain. For example, must have three Enclosures to have two Storage Domains.

INSUFFICIENT_CAPACITY
ShortDescription : The system cannot allocate more volumes, repositories, or clones because there is not enough available capacity.
LongDescription: The system cannot allocate more volumes, repositories, or clones because there is not enough available capacity in the system.
Comment: The system does not have enough capacity to allocate more volumes, repositories, or clones.

INSUFFICIENT_EXTENTS
ShortDescription : The system cannot increase existing storage allocations or create any additional volumes, clones, or repositories.
LongDescription: The system allows a specific number of extents to manage storage allocation for volumes, clones, and repositories. This limit has been reached. Delete some volumes, clones, or repositories and try again.
Comment: There are not enough extents available to increase capacity or create the requested volume, clone, or repository. This is very bad.

INSUFFICIENT_USABLE_DRIVE_GROUPS
ShortDescription : There are too few Enclosures with the proper revision to start the system.
LongDescription: There are too few Enclosures with the proper revision to start the system.
Comment: The system cannot find enough correct-revision Enclosure LUNs proceed.

INSUFFICIENT_VLUNS
ShortDescription : The system cannot create any additional volumes, clones, or repositories.
LongDescription: The system allows a specific number of the combination of volumes, clones, and repositories. This limit has been reached. Delete some volumes, clones, or repositories and try again.
Comment: There are not enough vLUNs available to create the requested volume, clone, or repository.

INSUFFICIENT_VOLUME_GROUP_CAPACITY
ShortDescription : The volume group cannot allocate a volume because there is not enough available capacity in the volume group.
LongDescription: The volume group cannot allocate a volume because there is not enough available capacity in the volume group.
Comment: The volume group doesn't have enough capacity to allocate all of the volumes requested.

INTERNAL_STORAGE_DOMAIN_VERIFICATION_NOT_CANCELLABLE
ShortDescription : An internal storage domain verification cannot be cancelled.
LongDescription: An internal storage domain verification cannot be cancelled.
Comment: An internal storage domain verification cannot be cancelled.

INTERVAL_TOO_FREQUENT
ShortDescription : The scheduled interval is too frequent for the context it is being applied.
LongDescription: The interval being select is too frequent for the context it is being applied. Select a longer interval.
Comment: The scheduled interval is too frequent for the context it is being applied.

INVALID_ACCESS_BIAS
ShortDescription : The access bias specified is not valid.
LongDescription: The access bias specified is not valid.
Comment: The specified access bias is not valid.

INVALID_ACCESS_CONTROL_METHOD
ShortDescription : The specified access control method is not valid.
LongDescription: The specified access control method is not valid. Enter a valid access control method.
Comment: An invalid access control method was chosen for the initiator.

INVALID_ACTIVATE_FILESYSTEM_SETTING
ShortDescription : A filesystem cannot be made inactive once it is active.
LongDescription: A filesystem cannot be made inactive once it is active.
Comment: A filesystem cannot be made inactive once it is active.

INVALID_ACTIVATE_LUN_SETTING
ShortDescription : A LUN volume cannot be made inactive once it is active.
LongDescription: A LUN volume cannot be made inactive once it is active.
Comment: A LUN volume cannot be made inactive once it is active.

INVALID_APPLIANCE_GUID
ShortDescription : The appliance GUID is not valid.
LongDescription: The supplied replication appliance GUID is in an unrecognized format.
Comment: The appliance GUID is not valid.

INVALID_BLOCK_SNAPSHOT_SUID
ShortDescription : The block snapshot specified is not valid.
LongDescription: The block snapshot specified is not valid.
Comment: The specified block snapshot SUID is not valid.

INVALID_ENCLOSURE_CONSOLE_SESSION
ShortDescription : An Enclosure console session is not open for the specified Enclosure and RAID controller.
LongDescription: An Enclosure console session is not open for the specified Enclosure and RAID controller.
Comment: An Enclosure console session is not open for the specified Enclosure and RAID controller.

INVALID_ENCLOSURE_FRU_TYPE
ShortDescription : The specified Enclosure FRU Type is not valid.
LongDescription: The Enclosure FRU Type specified is not valid in this request.
Comment: The EnclosureFruType is just not valid.

INVALID_CALLHOME_MATRIX_FILE
ShortDescription : The Call-Home matrix file is not valid.
LongDescription: The Call-Home matrix file is not valid. Enter a different filename or obtain a new matrix file from Oracle.
Comment: The Call-Home matrix file contents are not in the expected format.

INVALID_CHAP_SECRET_AND_VALIDATION_COMBINATION
ShortDescription : The CHAP password entries are not valid.
LongDescription: The CHAP password and the retyped CHAP password values do not match.
Comment: Only one CHAP password was provided or the password entries do not match.

INVALID_CHARACTER
ShortDescription : A character is not valid.
LongDescription: A character is not valid. Correct the character in the command and try again.
Comment: A character is not valid.

INVALID_CHARACTER_SET
ShortDescription : The character set specified is not valid.
LongDescription: The character set specified is not valid.
Comment: The specified character set is not valid.

INVALID_CHECKPOINT_SUID
ShortDescription : The checkpoint specified is not valid.
LongDescription: The checkpoint specified is not valid.
Comment: The specified checkpoint SUID is not valid.

INVALID_CHECKSUM
ShortDescription : The uploaded file results in an invalid checksum.
LongDescription: The uploaded file results in an invalid checksum file processing error. Provide a different file and try again.
Comment: The uploaded file results in an invalid checksum.

INVALID_CIFS_AUTHENTICATION_MODE
ShortDescription : The CIFS authentication mode specified is not valid.
LongDescription: The CIFS authentication mode specified is not valid.
Comment: The specified CIFS authentication mode is not valid.

INVALID_CIFS_SHARE_SUID
ShortDescription : The CIFS share specified is not valid.
LongDescription: The CIFS share specified is not valid.
Comment: The specified CIFS share SUID is not valid.

INVALID_CONSISTENCY_GROUP_SUID
ShortDescription : The consistency group specified is not valid.
LongDescription: The consistency group specified is not valid.
Comment: The specified consistency group SUID is not valid.

INVALID_CREATION_METHOD
ShortDescription : The create could not be completed.
LongDescription: The create could not be completed.
Comment: The creation method is not valid.

INVALID_DRIVE_TO_STORAGE_CLASS_MAPPING_FILE
ShortDescription : The Drive to Storage Class Mapping file is not valid.
LongDescription: The Drive to Storage Class Mapping file is not valid. Enter a different filename or obtain a new Drive to Storage Class Mapping file from Oracle.
Comment: The Drive to Storage Class Mapping file contents are not in the expected format.

INVALID_DRIVE_VERSION
ShortDescription : The requested drive version to update is not valid.
LongDescription: The requested drive version to update is not valid. Enter a valid drive version.
Comment: The requested drive version to update is not valid.

INVALID_DISPLAY_NUMBER
ShortDescription : The requested display number is not valid.
LongDescription: The requested display number is not valid.
Comment: The requested display number is not valid.

INVALID_ENABLED_PORT_MASK
ShortDescription : The enabled port mask settings are not valid.
LongDescription: The enabled port mask settings are not valid.
Comment: The enabled port mask is not valid.

INVALID_ERROR
ShortDescription : The error code is unknown.
LongDescription: The error code was unknown. The GUI cannot convert the error response from the Pilot. If this error persists, contact Customer Support.
Comment: The INVALID_ERROR value should never appear on the wire but just in case -1 is used instead of Integer.MIN_VALUE because not all clients are implemented in Java

INVALID_FAILOVER_LIST
ShortDescription : The Controller failover sequence does not include an online Controller.
LongDescription: The Controller failover sequence does not include an online Controller.
Comment: The specified failover list does not contain on online Controller.

INVALID_FEATURE_LICENSE
ShortDescription : The Feature License value does not decode to the expected Oracle FS System feature.
LongDescription: The Feature License value does not decode to the expected Oracle FS System feature. Try again or contact Customer Support.
Comment: The feature license value does not decode to the expected system feature.

INVALID_FEATURE_LICENSE_FILE
ShortDescription : The feature license file is not valid.
LongDescription: The feature license file is not valid. Enter a different filename or obtain a new license key file from Oracle.
Comment: The feature license file contents are not in the expected format.

INVALID_FILESYSTEM_PUID
ShortDescription : The filesystem specified is not valid.
LongDescription: The filesystem specified is not valid.
Comment: The specified filesystem PUID is not valid.

INVALID_FILESYSTEM_SNAPSHOT_SUID
ShortDescription : The filesystem snapshot specified is not valid.
LongDescription: The filesystem snapshot specified is not valid.
Comment: The specified filesystem snapshot SUID is not valid.

INVALID_FILESYSTEM_SOURCE_SUID
ShortDescription : The source filesystem specified is not valid.
LongDescription: The source filesystem specified is not valid.
Comment: The specified filesystem source SUID is not valid.

INVALID_FILESYSTEM_SUID
ShortDescription : The filesystem specified is not valid.
LongDescription: The filesystem specified is not valid.
Comment: The specified filesystem SUID is not valid.

INVALID_FILESYSTEM_TIER_ARRAY
ShortDescription : The specified filesystem tier array is not valid.
LongDescription: The specified filesystem tier array is not valid.
Comment: The filesystem tier array is not valid.

INVALID_FILESYSTEM_TIER_MODIFY_PARAMETER
ShortDescription : QoS settings of a filesystem tier within a filesystem clone cannot be modified.
LongDescription: Quality of Service settings of a filesystem tier within a filesystem clone cannot be modified.
Comment: QoS settings of a filesystem tier within a filesystem clone cannot be modified.

INVALID_FILESYSTEM_TIER_SUID
ShortDescription : The filesystem tier specified is not valid.
LongDescription: The filesystem tier specified is not valid.
Comment: The specified filesystem tier SUID is not valid.

INVALID_FILE_SERVER
ShortDescription : Specified File Server is not valid.
LongDescription: The specified File Server does not match any of the configured File Servers.
Comment: The File Server specified is not valid.

INVALID_FILE_SERVER_SUID
ShortDescription : The File Server specified is not valid.
LongDescription: The File Server specified is not valid.
Comment: The specified File Server suid is not valid.

INVALID_FRAME_SIZE
ShortDescription : The frame size specified is not valid.
LongDescription: The frame size specified is not valid.
Comment: The specified frame size is not valid.

INVALID_GUID
ShortDescription : The GUID specified is not valid.
LongDescription: The GUID specified is not valid.
Comment: The specified GUID is not valid.

INVALID_HALT_POINT
ShortDescription : The halt point for system startup is not valid.
LongDescription: The halt point for system startup is not valid.
Comment: An invalid halt point was sent to the Pilot.

INVALID_HARDWARE_STATUS
ShortDescription : The system generated an error on a request.
LongDescription: The system generated an error on a request likely due to hardware problems. Check the hardware.
Comment: General catch-all error until we get all the specific error codes in place.

INVALID_HOST_LOOKUP
ShortDescription : The host lookup specified is not valid.
LongDescription: The host lookup specified is not valid.
Comment: The specified host lookup is not valid.

INVALID_INITIATOR_NAME
ShortDescription : The initiator name is not valid.
LongDescription: The initiator name is not valid. Enter a valid name.
Comment: Invalid initiator name is empty.

INVALID_INITIATOR_OPTION
ShortDescription : The specified initiator option is not valid.
LongDescription: The specified initiator option is not valid. Enter a valid option.
Comment: The initiator option is not valid.

INVALID_IO_BIAS
ShortDescription : The IO bias specified is not valid.
LongDescription: The IO bias specified is not valid.
Comment: The specified IO bias is not valid.

INVALID_IP_ADDRESS
ShortDescription : The IP address is not valid.
LongDescription: The input IP address must be in the format of xxx.xxx.xxx.xxx.
Comment: The IP address provided is not valid.

INVALID_IP_FIELD_IP_ADDRESS_REQUIRED
ShortDescription : IP address provided cannot be a host name.
LongDescription: The input IP address cannot be a host name. This value must be a valid IPv4 or IPv6 address.
Comment: IP address provided cannot be a host name.

INVALID_ISCSI_CHAP_NAME
ShortDescription : The iSCSI chap name is empty.
LongDescription: The iSCSI chap name is empty. Enter a valid name.
Comment: The iSCSI chap name is empty.

INVALID_ISCSI_TARGET_NAME
ShortDescription : The iSCSI target name is empty.
LongDescription: The iSCSI target name is empty. Enter a valid name.
Comment: The iSCSI target name is empty

INVALID_LINK_AGGREGATION_OPTION
ShortDescription : The link aggregation option specified is not valid.
LongDescription: The link aggregation option specified is not valid.
Comment: The specified link aggregation option is not valid.

INVALID_LOGIN_CREDENTIALS
ShortDescription : The username or password is not valid.
LongDescription: The credentials were not valid during login.
Comment: The login credentials are not valid.

INVALID_LUN_CLONE_VOLUME
ShortDescription : The volume specified is not a clone of a LUN.
LongDescription: The volume specified must be an active clone of a LUN.
Comment: The volume specified is not a clone of a LUN.

INVALID_LUN_LUID
ShortDescription : The LUN LUID specified is not valid.
LongDescription: The LUN LUID specified is not valid.
Comment: The specified LUN LUID is not valid.

INVALID_LUN_MAPPED_SUID
ShortDescription : The LUN mapping specified for the LUN is not valid.
LongDescription: The LUN mapping specified for the LUN is not valid.
Comment: The specified LUN mapping SUID is not valid.

INVALID_LUN_PUID
ShortDescription : The LUN specified is not valid.
LongDescription: The LUN specified is not valid.
Comment: The specified LUN PUID is not valid.

INVALID_LUN_SOURCE_SUID
ShortDescription : The source LUN specified is not valid.
LongDescription: The source LUN specified is not valid.
Comment: The specified LUN source SUID is not valid.

INVALID_LUN_SUID
ShortDescription : The LUN specified is not valid.
LongDescription: The LUN specified is not valid.
Comment: The specified LUN SUID is not valid.

INVALID_LUN_VOLUME
ShortDescription : The volume specified is not a LUN.
LongDescription: The volume specified must be an active LUN.
Comment: The volume specified is not a LUN.

INVALID_MAXIMUM_REPOSITORY_CAPACITY
ShortDescription : The maximum repository capacity cannot be less than the current maximum repository capacity.
LongDescription: The maximum repository capacity cannot be less than the current maximum repository capacity.
Comment: The maximum repository capacity cannot be less than the current maximum repository capacity.

INVALID_MEMORY_CONFIGURATION
ShortDescription : The Controller memory configuration is not valid.
LongDescription: The Controller memory configuration is not valid.
Comment: The memory configuration is not valid.

INVALID_MTU
ShortDescription : The specified value for MTU for the iSCSI port is not valid.
LongDescription: The specified value for MTU for iSCSI port is not valid.
Comment: The specified value for MTU for iSCSI port is not valid.

INVALID_NAME
ShortDescription : The name is not valid.
LongDescription: The name is not valid.
Comment: The name is not valid.

INVALID_NAS_NAME_TYPE
ShortDescription : The NAS name type is not valid.
LongDescription: The NAS name type is not valid.
Comment: The NAS name type is not valid.

INVALID_NFS_EXPORT_SUID
ShortDescription : The specified NFS export is not valid.
LongDescription: The specified NFS export is not valid.
Comment: The NFS export SUID is not valid.

INVALID_NIS_OR_LDAP_CONFIG_FILE_TYPE
ShortDescription : The specified NIS or LDAP configuration file type is not valid.
LongDescription: The specified NIS or LDAP configuration file type is not valid.
Comment: The NIS or LDAP configuration file type is not valid.

INVALID_PARAMETER_FORMAT
ShortDescription : The parameter has an unexpected or invalid format.
LongDescription: The parameter has an unexpected or invalid format.
Comment: A generic unexpected format error was issued.

INVALID_PARENT_FILESYSTEM_TYPE
ShortDescription : The parent filesystem of a filesystem tier cannot be a clone.
LongDescription: The parent filesystem of a filesystem tier cannot be a clone.
Comment: The parent filesystem of a filesystem tier cannot be a clone.

INVALID_PARTIAL_COPY
ShortDescription : The clone cannot be created because the source volume was not specified.
LongDescription: The clone cannot be created because the source volume was not specified.
Comment: Partial copy requested and source volume SUID was not specified.

INVALID_PASSWORD
ShortDescription : The password is not valid.
LongDescription: The password is not valid.
Comment: The password is not valid.

INVALID_PASSWORD_DURATION
ShortDescription : The password duration is either too short or too long.
LongDescription: The password duration is either too short or too long.
Comment: The password duration is either too short or too long.

INVALID_PASSWORD_LOOKUP
ShortDescription : The password lookup specified is not valid.
LongDescription: The password lookup specified is not valid.
Comment: The specified password lookup is not valid.

INVALID_PDS_FILESYSTEM
ShortDescription : The specified filesystem is the PDS filesystem which is not a valid filesystem choice.
LongDescription: The specified filesystem is the PDS filesystem which is not a valid filesystem choice.
Comment: The specified filesystem is the PDS filesystem which is not a valid filesystem choice.

INVALID_PERFORMANCE_PROFILE_SUID
ShortDescription : The performance profile specified is not valid.
LongDescription: The performance profile specified is not valid.
Comment: The specified performance profile SUID is not valid.

INVALID_PERSONALITY_FOR_REQUEST
ShortDescription : The system's personality is not valid for the request.
LongDescription: The system's personality is not valid for this request. This means either you attempted to do a NAS only function on a SAN only system or a SAN only function on a NAS only system.
Comment: The system's personality is not valid for the request issued

INVALID_PROVISIONING_FOR_HBA_PORT
ShortDescription : The requested provisioning is not supported for the selected HBA port.
LongDescription: The requested provisioning is not supported for the selected HBA port. Select a protocol the card supports and try again.
Comment: The requested provisioning is not supported for the selected HBA port.

INVALID_QOS_PRIORITY
ShortDescription : The QoS priority is not valid.
LongDescription: The QoS priority requested is not valid.
Comment: The Qos priority being sent to Conman is not valid.

INVALID_QUEUING_PRIORITY
ShortDescription : The queuing priority specified is not valid.
LongDescription: The queuing priority specified is not valid.
Comment: The specified queuing priority is not valid.

INVALID_QUOTA_TYPE
ShortDescription : A quota related request had an invalid quota type specified.
LongDescription: A quota related request had an invalid quota type specified.
Comment: An invalid quota type given in quota-related command.

INVALID_RADIUS_SECRET_LENGTH
ShortDescription : The length specified for the system radius secret setting is not valid.
LongDescription: The length specified for the system radius secret setting is not valid
Comment: The radius secret length is not valid.

INVALID_RAID_LEVEL
ShortDescription : The RAID level specified for the volume is not valid.
LongDescription: The RAID level used to create or modify the volume using a storage profile is not valid.
Comment: The specified RAID level does not exist.

INVALID_READ_AHEAD_MODE
ShortDescription : The read ahead mode specified is not valid.
LongDescription: The read ahead mode specified is not valid.
Comment: The specified read ahead mode is not valid.

INVALID_REDUNDANCY
ShortDescription : The redundancy specified is not valid.
LongDescription: The redundancy specified is not valid.
Comment: The specified redundancy is not valid.

INVALID_ROLE
ShortDescription : Account role is not valid for the request.
LongDescription: Account role is not valid for the request.
Comment: Account role is not valid for the request

INVALID_SAN_INITIATOR_SUID
ShortDescription : The SAN initiator specified is not valid.
LongDescription: The SAN initiator specified is not valid.
Comment: The specified SAN initiator suid is not valid.

INVALID_SAN_PROTOCOL
ShortDescription : The SAN protocol specified is not valid.
LongDescription: The SAN protocol specified is not valid.
Comment: The specified SAN protocol is not valid.

INVALID_SCHEDULE_INTERVAL
ShortDescription : The schedule interval is not valid.
LongDescription: The selected schedule interval is not valid.
Comment: The schedule interval is not valid.

INVALID_SESSION_ID
ShortDescription : The session ID is not valid.
LongDescription: The provided session ID is not valid. The error is likely due to a mistyped session ID but may also be due to a session ID that has timed out.
Comment: The session ID is not valid.

INVALID_CONTROLLER_FRU_TYPE
ShortDescription : The specified Controller FRU type is not valid.
LongDescription: The Controller FRU type specified is not valid in this request.
Comment: The ControllerFruType is not valid.

INVALID_CONTROLLER_FRU_TYPE_NOT_NAS_CONTROLLER
ShortDescription : The Controller is not a NAS Controller so it does not contain a NAS Interface Module.
LongDescription: The Controller is not a NAS Controller so it does not contain a NAS Interface Module.
Comment: The ControllerFruType was NAS_INTERFACE_MODULE, but this is not a NAS Controller.

INVALID_CONTROLLER_FRU_TYPE_NOT_SAN_CONTROLLER
ShortDescription : The Controller is not a SAN Controller so it does not contain a SAN Interface Module.
LongDescription: The Controller is not a SAN Controller so it does not contain a SAN Interface Module.
Comment: The ControllerFruType was SAN_INTERFACE_MODULE, but this is not a SAN Controller.

INVALID_CONTROLLER
ShortDescription : The Controller specified is not valid.
LongDescription: The specified Controller is not present in the system.
Comment: The Controller specified is not valid.

INVALID_CONTROLLER_PORT
ShortDescription : The iSCSI, FC, or Ethernet port does not exist.
LongDescription: The iSCSI, FC, or Ethernet port does not exist.
Comment: The iSCSI, FC, or Ethernet port does not exist.

INVALID_CONTROLLER_STATE
ShortDescription : The current state for specified Controller is not valid.
LongDescription: The state for the specified Controller is not valid. The operation cannot be executed.
Comment: The state for the specified Controller is not valid. The operation cannot be executed.

INVALID_CONTROLLER_SERVICE_TYPE
ShortDescription : The Controller service type is not valid.
LongDescription: The Controller service type is not set to NAS or SAN. Set the service type to NAS or SAN.
Comment: The Controller service type is not valid.

INVALID_HBA_PORT_SPECIFIED
ShortDescription : The specified HBA and PORT combination is invalid beause it does not exist.
LongDescription: The specified HBA and PORT combination is invalid beause it does not exist.
Comment: The specified HBA and PORT combination is invalid beause it does not exist.

INVALID_SLOT_NUMBER
ShortDescription : The slot number is not valid.
LongDescription: The slot number is not valid.
Comment: The slot number is not valid.

INVALID_SOFTWARE_COMPONENT
ShortDescription : The software component version number is not recognized.
LongDescription: The software component version number is not recognized. Verify the software component version number is formatted correctly, then submit the request again.
Comment: The software component version number is not recognized.

INVALID_SOURCE_FILESYSTEM_TIER_SUID
ShortDescription : The source filesystem tier specified is not valid.
LongDescription: The source filesystem tier specified is not valid.
Comment: The specified source filesystem tier SUID is not valid.

INVALID_STATISTICS_COLLECTION_PERIOD
ShortDescription : The statistics collection period is not valid.
LongDescription: The statistics collection period was less than zero or too large.
Comment: The statistics collection period was less than zero or too large.

INVALID_STORAGE_CLASS
ShortDescription : The storage class specified is not valid.
LongDescription: The storage class specified is not valid.
Comment: The specified storage class does not exist.

INVALID_STORAGE_DOMAIN_SUID
ShortDescription : The Storage Domain specified is not valid.
LongDescription: The Storage Domain specified is not valid.
Comment: The specified Storage Domain SUID is not valid.

INVALID_STRIPE_FACTOR
ShortDescription : The stripe factor specified for the volume is not valid.
LongDescription: The stripe factor used to create or modify the volume using a storage profile is not valid.
Comment: The specified stripe factor is not valid.

INVALID_STRIP_SIZE
ShortDescription : The strip size specified for the volume is not valid.
LongDescription: The strip size used to create or modify the volume using a storage profile is not valid.
Comment: The specified strip size does not exist.

INVALID_SYSTEM_RESET_TICKET
ShortDescription : The system reset ticket is not valid.
LongDescription: The system reset ticket is not valid. Try again or contact Customer Support.
Comment: The system reset ticket is not valid.

INVALID_SYSTEM_RESET_TICKET_FILE
ShortDescription : The system reset file is not valid.
LongDescription: The system reset ticket file is not valid. Enter a different filename or obtain a new file from Oracle.
Comment: The system reset ticket file is not valid.

INVALID_TIER_MIGRATION_CHAIN
ShortDescription : The tier migration chain is not valid.
LongDescription: The tier migration chain is not valid. A chain must include all of the tiers, each tier must point uniquely to the next tier, and the last tier must point to itself.
Comment: The tier migration chain is not valid.

INVALID_TOKEN
ShortDescription : The token is not valid.
LongDescription: The token is not valid.
Comment: The token is not valid.

INVALID_UPDATE_PACKAGE_CONTENTS
ShortDescription : The update package type is not valid.
LongDescription: The update package type is not valid. Stage the appropriate HDD or software update package and try the update request again.
Comment: The staged package contents are not in the expected type for the software update being requested.

INVALID_UPDATE_PACKAGE_FILE
ShortDescription : The update package is not valid.
LongDescription: The update package is not valid. Enter a different package name or obtain a new update package from Oracle.
Comment: The update package contents are not in the expected format.

INVALID_UPGRADE_PATH
ShortDescription : The requested upgrade path is not valid due to a previous custom software installation or an invalid or missing compatibility matrix.
LongDescription: The requested upgrade path is not valid because the installed software is not a standard Oracle software configuration or there is no supported upgrade path between the installed and staged software configurations. This requested update must use the "Ignore Compatibility" option. The update may result in data loss.
Comment: The requested software upgrade path is not valid.

INVALID_VIF_SUID
ShortDescription : The specified VIF is not valid.
LongDescription: The specified VIF is not valid.
Comment: The VIF SUID is not valid.

INVALID_VLAN_ID
ShortDescription : The vlan ID cannot be greater than 4095.
LongDescription: The vlan ID cannot be greater than 4095.
Comment: The vlan ID is greater than the 4095.

INVALID_VLAN_TAG
ShortDescription : The vlan tag is not valid.
LongDescription: The vlan tag is not valid.
Comment: The vlan tag is not valid.

INVALID_VOLUME_GROUP_SUID
ShortDescription : The volume group specified is not valid.
LongDescription: The volume group specified is not valid.
Comment: The specified volume group SUID is not valid.

INVALID_VOLUME_PUID
ShortDescription : The volume specified is not valid.
LongDescription: The volume specified is not valid.
Comment: Volume PUID is null, malformed, or not a LUN or filesystem.

INVALID_VOLUME_SUID
ShortDescription : The volume specified is not valid.
LongDescription: The volume specified is not valid.
Comment: Volume SUID is null, malformed, or not a LUN or filesystem.

INVALID_VOLUME_TYPE
ShortDescription : The volume specified is not the volume type expected by the request.
LongDescription: The volume specified must be the type of volume (filesystem or filesystem clone) expected by the request being called.
Comment: The volume specified is not the volume type expected by the request.

INVALID_WRITE_CACHE_MODE
ShortDescription : The write cache mode specified is not valid.
LongDescription: The write cache mode specified is not valid.
Comment: The specified write cache mode is not valid.

IO_EXCEPTION_WHILE_READING_MESSAGE
ShortDescription : An IOException occurred.
LongDescription: An IOException occurred while reading a message.
Comment: This error is used when an IOException is thrown while reading a CSI message.

IP_ADDRESS_INVALID_FORMAT
ShortDescription : The IP address provided is malformed.
LongDescription: The input IP address is not a valid IPv4 address or IPv6 address or is an invalid host name.
Comment: The IP address provided is malformed.

IP_ADDRESS_NOT_PINGABLE
ShortDescription : The ping was issued to the specified IP address, but no response was received.
LongDescription: The ping was issued to the specified IP address, but no response was received.
Comment: Ping was issued, but was not returned

ISCSI_FCP_LICENSE_REQUIRED
ShortDescription : This request requires an iSCSI or Fibre Channel Protocol license.
LongDescription: This request requires an iSCSI or Fibre Channel Protocol license. Install the needed license.
Comment: This request requires an iSCSI or Fibre Channel Protocol license.

ISCSI_FCP_VTL_LICENSE_REQUIRED
ShortDescription : This request requires an iSCSI, Fibre Channel Protocol, or Virtual Tape Library license.
LongDescription: This request requires an iSCSI or Fibre Channel Protocol license. Install the needed license.
Comment: This request requires an iSCSI, Fibre Channel Protocol, or Virtual Tape Library license.

ISCSI_LICENSE_REQUIRED
ShortDescription : This request requires an iSCSI license.
LongDescription: This request requires an iSCSI license. Install the needed license.
Comment: This request requires an iSCSI license.

ISCSI_VOLUME_EXISTS_CANNOT_DELETE_LICENSE
ShortDescription : The iSCSI feature license cannot be deleted.
LongDescription: The system cannot delete an iSCSI license until after all LUNs and LUN Clones using iSCSI have been deleted.
Comment: The iSCSI feature license cannot be deleted while a LUN or LUN Clone using iSCSI exists on the system.

ISNS_SERVER_REGISTRATION_MUST_BE_ENABLED_FOR_ISNS_ACCESS_CONTROL
ShortDescription : iSNS Server Registration must be enabled for iSNS Access Control.
LongDescription: In global iSCSI iSNS Configuration, when Access Control is set for iSNS, iSNS Server Registration must also be enabled.
Comment: iSNS Server Registration must be enabled for iSNS Access Control.

JOB_CHOICE_NOT_SUPPORTED
ShortDescription : The job choice is not supported.
LongDescription: The job choice is not supported.
Comment: The job choice is not supported. Check the mapping between the CSI and PMI equivalents.

LAST_TIER_MUST_POINT_TO_ITSELF
ShortDescription : The last tier in a tier migration chain must point to itself as the "next" tier.
LongDescription: The last tier in a tier migration chain must point to itself as the "next" tier.
Comment: The last tier in a tier migration chain must point to itself as the "next" tier.

LINK_AGGREGATION_NOT_ENABLED
ShortDescription : Link aggregation is not enabled for the specified Controller.
LongDescription: Link aggregation is not enabled for the specified Controller.
Comment: Link aggregation is not enabled for the specified Controller.

LOCALE_COUNTRY_REQUIRES_LOCALE_LANGUAGE
ShortDescription : Locale country requires a locale language.
LongDescription: Locale country requires a locale language. Either provide a locale language or remove the locale country.
Comment: Locale country requires a locale language.

LOCALE_VARIANT_REQUIRES_LOCALE_COUNTRY
ShortDescription : Locale variant requires a locale country.
LongDescription: Locale variant requires a locale country. Either provide a locale country or remove the locale variant.
Comment: Locale variant requires a locale country.

LOCALE_VARIANT_REQUIRES_LOCALE_LANGUAGE
ShortDescription : Locale variant requires a locale language.
LongDescription: Locale variant requires a locale language. Either provide a locale language or remove the locale variant
Comment: Locale variant requires a locale language.

LOCK_INVALID
ShortDescription : The system is unable to acquire a lock to complete an operation.
LongDescription: The system is unable to acquire a lock to complete an operation.
Comment: The necessary lock was not acquired.

LOG_BUNDLE_TOO_LARGE_FOR_HTTPS_CALLHOME
ShortDescription : The log bundle is too large to perform Call-Home via HTTPS Post.
LongDescription: The system unable to perform a Call-Home to send the specified bundle to Oracle because the file is too large for an HTTPS Post. Use SCP to upload the bundle, find another means to send the bundle home, or contact Customer Support.
Comment: The log bundle is too large to perform Call-Home via HTTPS Post.

LOG_SENDING_QUEUE_FULL
ShortDescription : The queue for sending log bundles to the Call-Home server is full.
LongDescription: The queue for sending log bundles to the Call-Home server is full.
Comment: The queue for sending log bundles to the Call-Home server is full.

LUN_CLONE_EXISTS_CANNOT_DELETE_LICENSE
ShortDescription : The system cannot delete a LUN Clone license.
LongDescription: The system cannot delete a LUN Clone license until all LUN clones have been deleted.
Comment: The system cannot delete a LUN Clone license until all LUN clones have been deleted.

LUN_CLONE_LICENSE_REQUIRED
ShortDescription : This request requires a LUN Clone license.
LongDescription: This request requires a LUN Clone license. Install the needed license.
Comment: This request requires a LUN Clone license.

LUN_DOES_NOT_EXIST
ShortDescription : The specified LUN does not exist.
LongDescription: The specified LUN does not exist. Try again.
Comment: The LUN does not exist.

LUN_INACTIVE
ShortDescription : The datapath has been disabled for this SAN LUN.
LongDescription: The datapath has been disabled for this SAN LUN. Some modifications are not allowed in this state.
Comment: The datapath has been disabled for this SAN LUN.

LUN_MAPPING_DOES_NOT_EXIST
ShortDescription : The specified LUN mapping for the LUN does not exist.
LongDescription: The specified LUN mapping for the LUN does not exist. Try again.
Comment: The LUN mapping reference does not exist.

LUN_NOT_MAPPED
ShortDescription : The LUN is not mapped properly.
LongDescription: The LUN is not mapped properly. Map the LUN either globally or to an individual host.
Comment: The mapping for the LUN is not configured.

LUN_NUMBER_NOT_APPLICABLE_TO_MAPPED_LUN
ShortDescription : The LUN number is not applicable.
LongDescription: The LUN number specified cannot be applied to a mapped LUN.
Comment: The system is attempting to create or modify a mapped LUN and also assign a LUN number to it.

LUN_NUMBER_NOT_AVAILABLE
ShortDescription : The LUN number is not available for host.
LongDescription: The specified LUN number is already in use by either a global LUN or by another LUN on the host. Try a different LUN Number.
Comment: The requested LUN Number is already in use by either a global LUN or by another LUN on the host. A different LUN number must be chosen.

LUN_NUMBER_NOT_SPECIFIED
ShortDescription : A LUN number was not specified.
LongDescription: A LUN number was not specified. Issue the request again, specifying a LUN number.
Comment: No LUN Number was specified in the request. When creating a host to LUN map, a LUN number must be given.

LUN_NUMBER_REQUIRED_FOR_UNMAPPED_LUN
ShortDescription : A LUN number is required for an unmapped LUN.
LongDescription: A LUN number must be specified for an unmapped LUN.
Comment: When creating or modifying an unmapped LUN, a LUN number must be provided.

LUN_PREPARE_NOT_PARTIAL
ShortDescription : The Prepare command can only be used for Clone LUNs
LongDescription: The Prepare command can only be used for Clone LUNs
Comment: The Prepare command can only be used for Clone LUNs

LUN_OFFLINE
ShortDescription : The LUN is offline.
LongDescription: The LUN is offline.
Comment: A LUN is offline.

LUN_PROTOCOL_REQUIRED
ShortDescription : FC and iSCSI cannot both be disabled.
LongDescription: FC and iSCSI cannot both be disabled.
Comment: FC and iSCSI cannot both be disabled

LUN_CONTROLLER_PROTOCOL_MISMATCH
ShortDescription : The specified Controller does not support any protocols enabled on the LUN.
LongDescription: The specified Controller does not support any protocols enabled on the LUN. Check and make sure the hardware supports the desired protocol for the LUN.
Comment: The supplied Controller does not support any protocols enabled on the LUN.

LUN_THIN_PROVISIONING_LICENSE_REQUIRED
ShortDescription : This request requires a LUN Thin Provisioning license.
LongDescription: This request requires a LUN Thin Provisioning license. Install the needed license.
Comment: This request requires a LUN Thin Provisioning license.

LUN_ZONING_LICENSE_REQUIRED
ShortDescription : This request requires a LUN Zoning license.
LongDescription: This request requires a LUN Zoning license. Install the needed license.
Comment: This request requires a LUN Zoning license.

MALFORMED_ENCODED_INTEGER
ShortDescription : Client request cannot be parsed.
LongDescription: The incoming client-server interface message was garbled and is unparsable. Possibly this is caused by a mismatch in versions between the Pilot software and the client. Contact Customer Support.
Comment: The CSI message cannot be parsed.

MASKED_PORTS_MUST_BE_CONSISTENT_WITH_FAILOVER_SEQUENCE
ShortDescription : The masked ports specified must be part of a Controller where the LUN has been assigned.
LongDescription: The masked port list specified during LUN configuration can only specify Controller where the LUN can reside and have access to the chosen ports. Check the masked port list specified and ensure that the Controllers provided in the masked port list match the assigned Controller for the LUN.
Comment: The masked ports specified must be part of nodes that exist in the failover sequence. Basically, you can only mask ports on Controllers where the LUN can live. In 5.0, that is only on one Controller. In 5.x, that will be buddy anywhere.

MASM_LICENSE_REQUIRED
ShortDescription : This request requires an OracleFs ONEView(tm) license.
LongDescription: This request requires an OracleFs ONEView(tm) license. Install the needed license.
Comment: This request requires an OracleFs ONEView(tm) license.

MAXIMUM_OBJECTS_REACHED
ShortDescription : The system has reached the maximum number of this type of objects allowed.
LongDescription: The system has reached the maximum number of this type of objects allowed.
Comment: The system has reached the maximum number of this type of objects allowed.

MAXIMUM_RETENTION_PERIOD_CANNOT_BE_INCREASED
ShortDescription : The maximum retention period of a compliant SecureWORMfs cannot be increased.
LongDescription: The maximum retention period of a compliant SecureWORMfs cannot be increased.
Comment: The maximum retention period of a compliant SecureWORMfs cannot be increased.

MAXIMUM_TIERS_IN_FILESYSTEM_REACHED
ShortDescription : The filesystem contains the maximum number of tiers allowed.
LongDescription: The filesystem contains the maximum number of tiers allowed.
Comment: The filesystem contains the maximum number of tiers allowed.

MAX_CAPACITY_LESS_THAN_ALLOCATED_TIER_CAPACITIES
ShortDescription : The addressable capacity is not valid.
LongDescription: Addressable capacity of a filesystem cannot be set to less than the sum of the allocated capacities of its tiers.
Comment: The max capacity of a filesystem cannot be set to a value less than the sum of the allocated capacities of its tiers.

MAX_CAPACITY_OF_ALLOCATION_GREATER_THAN_AVAILABLE_IN_VOLUME_GROUP_TREE
ShortDescription : The LUN capacity cannot exceed maximum capacity of a volume group.
LongDescription: The sum of a LUN's logical maximum capacity for clone LUN storage space and the LUN's addressable capacity must fit within a volume group tree's logical maximum capacity limit, if set.
Comment: The max capacity of LUN cannot exceed that of its parent volume group.

MAX_LOGICAL_CAPACITY_LESS_THAN_CAPACITY_OF_SOURCE
ShortDescription : The capacity is not valid.
LongDescription: The capacity cannot be set to less than the addressable capacity of the source.
Comment: The exposed capacity of the LUN is less than the exposed capacity of the source LUN.

MAX_REPOSITORY_CAPACITY_PERCENTAGE_CANNOT_BE_DECREASED_FOR_CLONE
ShortDescription : The maximum repository capacity percentage cannot be decreased for a clone.
LongDescription: The maximum repository capacity percentage cannot be decreased for a clone.
Comment: The maximum repository capacity percentage cannot be decreased for a clone.

MAY_NOT_ASSOCIATE_ORACLE_FS_HOST_TO_HOST_GROUP
ShortDescription : The specified host cannot be added to a host group. Only FSPM hosts and associated hosts may be added to host groups.
LongDescription: The specified host cannot be added to a host group. Only FSPM hosts and associated hosts may be added to host groups.
Comment: The specified host cannot be added to a host group. Only FSPM hosts and associated hosts may be added to host groups.

META_DATA_TIER_ALREADY_EXISTS
ShortDescription : The metadata tier already exists.
LongDescription: A filesystem configuration request was received which attempted to create a new metadata tier for a filesystem that already has a metadata tier. A filesystem can only have one metadata tier.
Comment: The metadata tier already exists.

META_DATA_TIER_REQUIERD
ShortDescription : A metadata tier is required for the configured multi-tier filesystem
LongDescription: The create or modify request to the filesystem requires a metadata tier be configured. Metadata tiers are required when more than 1 user-data tier is configured for a filesystem.
Comment: A metadata tier is required for the configured multi-tier filesystem.

MFS_CMFS_AUDIT
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_CMFS_AV_EACCES
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_CMFS_AV_EINVAL
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_CMFS_AV_ENOENT
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_CMFS_AV_EPERM
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_CMFS_AV_EXIST
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_CMFS_DATAINVAL
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_CMFS_ENOTEMPTY
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_CMFS_ENOTSUP
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_CMFS_FS_EBUSY
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_CMFS_FTYPE_NOTSUP
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_CMFS_IMMUTABLE
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_CMFS_NODE_EBUSY
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_CMFS_SCRUB_EBUSY
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_EBACKUP_DOWN
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_EBAD_UIO
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_EBUFFER_TOO_SMALL
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_ECANNOT_DELETE
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_ECMD_INVAL
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_ECONFIG_INVAL
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_EDOMAIN_LIMIT_EXCEEDED
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_EFSID_EXIST
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_EFSID_NOTFOUND
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_EFSNAME_EXIST
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_EFSNAME_INVAL
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_EFSRETENTION_INVAL
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_EFSSIZE_INVAL
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_EFSTYPE_INVAL
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_EFS_NOT_SNAP
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_EFS_NOT_STOPPED
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_EFS_WRONG_STATE
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_EGENERIC_NOT_MAPPED
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_EINCOMP_QUOTA_TREE
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_EINSUFF_SERVER_RESOURCES
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_EINTERNAL_ERROR
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_EINVALID_ACL
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_EINVALID_CRED
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_EINVALID_HANDLE
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_EINVALID_OWNER
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_EINVALID_PARAMETER
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_EINVALID_PRIMARY_GROUP
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_EINVALID_SECURITY_DESCR
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_EINVALID_SID
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_EINVALID_SUB_AUTHORITY
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_EIS_REP_TARGET
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_EMAX_GROWTH_REACHED
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_ENOT_FOUND
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_ENOT_QUIESCED
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_ENOT_QUOTA_OBJECT
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_ENOT_SUPPORTED
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_ENO_INHERITANCE
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_ENO_PINNED_DATA
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_ENO_SECURITY_ON_OBJECT
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_ENO_SUCH_DOMAIN
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_ENO_SUCH_PRIVILEGE
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_ENO_TOKEN
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_EPINNED_DATA_LOST
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_EPRIVILEGE_NOT_HELD
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_EQUIESCE_BUSY
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_EQUOTA_USAGE_INCONS
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_EREQ_EXIST
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_ERESTORE_BUSY
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_ERESTORE_IN_PROGRESS
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_ESD_CHECK_REQUIRED
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_ESNAP_ACCESS
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_ESNAP_BUSY
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_ESNAP_EXIST
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_ESNAP_NOTFOUND
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_ESNAP_NOT_SNAP
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_ESNAP_OVERFLOW
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_ESNAP_RESTORE_BUSY
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_ESNAP_SRCFS
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_ESNAP_SRCFS_IS_SNAP
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_ESNAP_TIMESTAMP
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_ESYNC_NOT_MATCH
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_ETOO_MANY_SIDS
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_ETRANSID_INVAL
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_ETRANS_EXIST
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_ETRANS_INVAL
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_ETRANS_NOTFOUND
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_EUNKNOWN_REVISION
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_EUNSUCCESSFUL
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_EUTIL_NOTFOUND
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_EVLUN_BUSY
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_EVLUN_INVAL
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_EVLUN_OFFLINE
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_EWRONG_NODE
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MFS_EWRONG_PHASE
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MINIMUM_RETENTION_PERIOD_CANNOT_BE_DECREASED
ShortDescription : The minimum retention period of a compliant SecureWORMfs cannot be decreased.
LongDescription: The minimum retention period of a compliant SecureWORMfs cannot be decreased.
Comment: The minimum retention period of a compliant SecureWORMfs cannot be decreased.

MODIFY_NTP_SETTINGS_INVALID_PERMISSION
ShortDescription : The system cannot modify NTP settings with the authenticated permissions.
LongDescription: Only support, primary administrator, or administrator1 accounts are allowed to execute the modify NTP settings command.
Comment: The account has invalid permissions for modifying NTP settings.

MODIFY_NTP_SETTINGS_DUPLICATE_IP
ShortDescription : Duplicate IP addresses for NTP settings are not allowed.
LongDescription: Duplicate IP addresses for NTP settings are not allowed.
Comment: Duplicate IP addresses were provided when modifying NTP settings.

MORE_THAN_ONE_CHOICE_TYPE_SPECIFIED
ShortDescription : Only one identifier choice type is allowed.
LongDescription: Use only one identifier type.
Comment: Only one identifier choice type is allowed. The requests allows identifiers of different types, but the identifiers are not to be used together. Only one identifier type can be used at a time, though multiple identifiers for either type are allowed.

MORE_THAN_TWO_ENCLOSURES_PRESENT_CANNOT_DELETE_LICENSE
ShortDescription : The system cannot delete an Extended Enclosure license.
LongDescription: The system cannot delete an Extended Enclosure license when there are more than two Enclosures in the system. Contact Customer Support.
Comment: The system cannot delete an Extended Enclosure license.

MQFSMI_EBADFSYS
ShortDescription : Internal error 0x9012E
LongDescription: Internal error 0x9012E: File System Corruption Encountered
Comment: Internal error 0x9012E

MQFSMI_EBUSY
ShortDescription : The File System is Busy
LongDescription: The File System is busy, please try again later.
Comment: The File System is Busy

MQFSMI_ECONFIG_INVAL
ShortDescription : Internal Error 0x90016
LongDescription: Internal Error 0x90016: Invalid Configuration Encountered.
Comment: Internal Error 0x90016

MQFSMI_EEXIST
ShortDescription : The File System Already Exists
LongDescription: An attempt was made to create a fielsystem that already exists. Please check the name and try again.
Comment: The File System Already Exists

MQFSMI_EIO
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

MQFSMI_ENOENT
ShortDescription : The File System Does Not Exist.
LongDescription: The File system does not exist. Please check the name and try again
Comment: The File System Does Not Exist.

MQFSMI_ENOMEM
ShortDescription : Internal Error 0x9000C
LongDescription: Internal Error 0x9000C: Out of Memory
Comment: Internal Error 0x9000C

MQFSMI_ENOSPC
ShortDescription : No Space Remaining
LongDescription: The request could not be completed because there is no space remaining in the target file system. Please increase the size of the filesystem or delete files and try again.
Comment: No Space Remaining

MQFSMI_ENOTEMPTY
ShortDescription : The object that is the target of this request is not empty
LongDescription: When deleting a Secure WORM Filesystem, the filesystem must be empty. When creating a new quota, the directory for the quota must be empty.
Comment: The object that is the target of this request is not empty

MQFS_LICENSE_REQUIRED
ShortDescription : This request requires a Multi-QoS Filesystem license.
LongDescription: This request requires a Multi-QoS Filesystem license. Install the needed license.
Comment: This request requires a Multi-QoS Filesystem license.

MUST_ALSO_INSTALL_MISSING
ShortDescription : Disruptive update validation failed due to having a missing "must also install".
LongDescription: A disruptive software update requires a co-requisite between different software components definition. Check the package and try again.
Comment: Disruptive update validation failed due to having a missing co-requisite between software components section.

NAME_LOOKUP_FAILED
ShortDescription : Name lookup failed for the specified user or group name.
LongDescription: Name lookup failed for the specified user or group name. There may be a problem with the specified File Server or its associated naming service.
Comment: Name lookup failed for the specified user or group name.

NDMP_LICENSE_REQUIRED
ShortDescription : This request requires an NDMP license.
LongDescription: This request requires an NDMP license. Install the needed license.
Comment: This request requires an NDMP license.

NDMP_SETTINGS_NOT_FOUND
ShortDescription : Internally stored NDMP settings were not found.
LongDescription: Internally stored NDMP settings were not found.
Comment: NDMP settings were not found.

NFS_ALREADY_STARTED
ShortDescription : Internal Error 0xA0081
LongDescription: Internal Error 0xA0081; The NFS Fileserver is already started
Comment: Internal Error 0xA0081

NFS_ALREADY_STOPPED
ShortDescription : Internal Error 0xA0082
LongDescription: Internal Error 0xA0082; The NFS Fileserver is already stopped
Comment: Internal Error 0xA0082

NFS_DUPLICATE_EXPORTINDEX
ShortDescription : Attempted to use an export index that is already in use
LongDescription: The export modification or creation attempted to use an export index that was already in use.
Comment: Duplicate Export Index

NFS_DUPLICATE_HOSTMATCHINGINDEX
ShortDescription : Attempted to use a host entry index that is already in use.
LongDescription: The host entry modification or creation attempted to use a host entry index that was already in use.
Comment: Duplicate Host Matching Index

NFS_DUPLICATE_INTERFACE
ShortDescription : Attempted to re-use an existing virtual interface
LongDescription: The fileserver creation or modification attempted to use a virtual interface that is already owned by another fileserver.
Comment: Duplicate Interface

NFS_DUPLICATE_VSID
ShortDescription : Internal Error 0xA008C
LongDescription: Internal Error 0xA008C: Duplicate VSID
Comment: Internal Error 0xA008C

NFS_EXISTING_EXTERNAL_PATH
ShortDescription : External Path Already Used
LongDescription: A different export is already using the external path.
Comment: External Path Already Used

NFS_EXPORT_DOES_NOT_EXIST
ShortDescription : The specified NFS export does not exist.
LongDescription: The specified NFS export does not exist.
Comment: NFS export does not exist.

NFS_GEN_NUMBER_INVALID
ShortDescription : The specified gen number is out of date or not valid.
LongDescription: The specified gen number is out of date or not valid.
Comment: NFS Gen number is out of date or is not valid

NFS_GEN_NUMBER_REQUIRED
ShortDescription : The specified query needs a gen number specified.
LongDescription: The specified query needs a gen number specified.
Comment: NFS operation needs a gen number.

NFS_HOST_DOES_NOT_EXIST
ShortDescription : The specified NFS host does not exist.
LongDescription: The specified NFS host does not exist.
Comment: NFS host does not exist.

NFS_INVALID_MODIFICATION
ShortDescription : Internal Error 0xA0083
LongDescription: Internal Error 0xA0083; Invalid Modification
Comment: Internal Error 0xA0083

NFS_LICENSE_REQUIRED
ShortDescription : This request requires as NFS license.
LongDescription: This request requires an NFS license. Install the needed license.
Comment: This request requires an NFS license.

NFS_NONEXISTENT_PATH
ShortDescription : Export Path does not exit
LongDescription: An attempt was made to create or modify an export using a path that does not exist
Comment: Non-existent Path

NFS_NO_EXPORT_SLABMEM
ShortDescription : Internal Error 0xA008A
LongDescription: Internal Error 0xA008A: No Export Slab Memory
Comment: Internal Error 0xA008A

NFS_NO_HOST_SLABMEM
ShortDescription : Internal Error 0xA008B
LongDescription: Internal Error 0xA008B: No Host Slab Memory
Comment: Internal Error 0xA008B

NFS_TOOMANY_VSERVERS
ShortDescription : Attempt to Create Too Many Fileservers
LongDescription: The user attempted to create a fileserver but that would result in too many.
Comment: Attempt to Create Too Many Fileservers

NFS_UNKNOWN_EXPORTINDEX
ShortDescription : Unknown Export
LongDescription: The export used in this request is not known to the system.
Comment: Unknown Export

NFS_SAMESUID_DIFFEXTRNLPATH
ShortDescription : Internal Error 0xA0097
LongDescription: Internal Error 0xA0097: Same SUID, Different External Path
Comment: Internal Error 0xA0097

NFS_SAMESUID_DIFFFSSUID
ShortDescription : Internal Error 0xA0093
LongDescription: Internal Error 0xA0093: Same SUID, Different Filesystem
Comment: Internal Error 0xA0093

NFS_SAMESUID_DIFFGENNUM
ShortDescription : Internal Error 0xA0092
LongDescription: Internal Error 0xA0092: Same SUID, Different Gen Number
Comment: Internal Error 0xA0092

NFS_SAMESUID_DIFFGROUPMAPPING
ShortDescription : Internal Error 0xA0095
LongDescription: Internal Error 0xA0095: Same SUID, Different Group Mapping
Comment: Internal Error 0xA0095

NFS_SAMESUID_DIFFINTRNLPATH
ShortDescription : Internal Error 0xA0096
LongDescription: Internal Error 0xA0096: Same SUID, Different Internal Path
Comment: Internal Error 0xA0096

NFS_SAMESUID_DIFFROOTMAPPING
ShortDescription : Internal Error 0xA0094
LongDescription: Internal Error 0xA0094: Same SUID, Different Root Mapping
Comment: Internal Error 0xA0094

NFS_UNKNOWN_FSID
ShortDescription : Unknown Filesystem
LongDescription: The Filesystem used in this request is not known to the system.
Comment: Unknown Filesystem

NFS_UNKNOWN_HOSTMATCHINGINDEX
ShortDescription : Unknown Host Matching Index.
LongDescription: The host matching index used in this request is not known to the system.
Comment: Unknown Host Matching Index.

NFS_UNKNOWN_INTERFACE
ShortDescription : Unknown Virtual Interface
LongDescription: The virtual interface used in this request is not known to the system.
Comment: Unknown Virtual Interface

NFS_UNKNOWN_VSID
ShortDescription : Unknown Fileserver
LongDescription: The fileserver used in this request is not known to the system.
Comment: Unknown Fileserver

NIS_OR_LDAP_CONFIG_FILE_DOES_NOT_EXIST
ShortDescription : The specified NIS or LDAP configuration file does not exist.
LongDescription: The specified NIS or LDAP configuration file does not exist.
Comment: NIS or LDAP configuration file does not exist.

COULD_NOT_DELETE_NIS_OR_LDAP_CONFIG_FILE
ShortDescription : A NIS or LDAP configuration file could not be deleted.
LongDescription: A NIS or LDAP configuration file could not be deleted.
Comment: A NIS or LDAP configuration file could not be deleted.

NONE
ShortDescription : No actual error occurred.
LongDescription: The None value is used to indicate that no actual error occurred.
Comment: The None value should not appear on the wire or in customer visible interfaces.

NONEXISTENT_FILESYSTEM_IN_MODIFY
ShortDescription : You cannot request to modify a filesystem that does not exist in the system.
LongDescription: You cannot request to modify a filesystem that does not exist in the system.
Comment: You cannot request to modify a filesystem that does not exist in the system.

NONEXISTENT_LUN_IN_MODIFY
ShortDescription : You cannot request to modify a LUN that does not exist in the system.
LongDescription: You cannot request to modify a LUN that does not exist in the system.
Comment: You cannot request to modify a LUN that does not exist in the system.

NON_ADMIN_ACCOUNT_CANNOT_CREATE_SAN_HOST
ShortDescription : Non-admin accounts cannot be used to create a SAN Host.
LongDescription: Non admin accounts cannot be used to create a SAN Host. The Perform Configure SAN Host request must be used by an FSPM driver account.
Comment: Non-admin accounts cannot be used to create a SAN Host.

NON_DISRUPTIVE_UPDATE_HAS_MUST_ALSO_INSTALL
ShortDescription : Non-disruptive software update validation failed due to having a co-requisite between software components definition.
LongDescription: A non-disruptive software update cannot require a co-requisite between different software components. Such a co-requisite would be a disruptive software update.
Comment: Non-disruptive software update validation failed due to having a co-requisite between software components definition.

NON_HDD_FIRMWARE_INCLUDED
ShortDescription : A disk drive update incorrectly contained non-disk drive firmware
LongDescription: A software update for disk drive firmware contained non-disk drive firmware. A software update containing a disk drive firmware update can only operate on disk drive firmware.
Comment: A disk drive update incorrectly contained non-disk drive firmware.

NOT_ABLE_TO_CORRECTLY_STAGE_PACKAGE
ShortDescription : A package staging failed.
LongDescription: A package staging failed. Try to update with another package.
Comment: A package staging failed.

NOT_ABLE_TO_GET_DISABLED_NODES
ShortDescription : The system is not able to determine which Controllers are currently disabled.
LongDescription: The system is not able to determine which Controllers are currently disabled. Try again.
Comment: The system is not able to determine which Controllers are currently disabled.

NOT_ABLE_TO_GET_SOFTWARE_VERSIONS
ShortDescription : The system is not able to read the software versions from the currently staged package.
LongDescription: The system is not able to read the software versions from the currently staged package. Stage another package.
Comment: The system is not able to read the software versions from the currently staged package.

NOT_ALL_HBA_PORTS_CONFIGURED_FOR_SLOT
ShortDescription : In a provisioning request, all ports for a given HBA must be specified.
LongDescription: When provisioning a Controller HBA, all ports for the HBA must be configured.
Comment: In a provisioning request, all ports for a given HBA must be specified.

NOT_ALL_CONTROLLERS_CONFIGURED
ShortDescription : During system restart not all Controllers are configured.
LongDescription: During system restart not all Controllers are configured properly in regards to path setup.
Comment: During coldstart, not all live Controllers are configured. (having paths)

NOT_IN_PRIMARY_STORAGE_DOMAIN
ShortDescription : Primary Storage Domain is required in some commands, for example, SetPersistenceDriveGroup.
LongDescription: Primary Storage Domain is required in some commands, for example, SetPersistenceDriveGroup.
Comment: Primary Storage Domain is required in some command, for example, SetPersistenceDriveGroup.

NO_AVAILABLE_UNIQUE_VSID
ShortDescription : There is not an available value for a File Server VSID.
LongDescription: There is not an available value for a File Server VSID. Contact Customer Support.
Comment: There is not an available value for a File Server VSID.

NO_DEFAULT_OWNER_NODE_AVAILABLE
ShortDescription : The are no Controllers on the system qualified to manage the volume being created.
LongDescription: There are no Controllers on the system that can manage the volume. Either the volume creation failed or the volume was created, but is not accessible. This could be due to specifying a protocol for the volume that is not available in the system or because the Controllers are not in the proper state. Check the hardware status of all Controllers.
Comment: The are no Controllers on the system qualified to manage the volume being created.

NO_DIAGNOSTICS_EXIST_FOR_CONTROL_UNIT
ShortDescription : No diagnostics exist for the requested Controller
LongDescription: No diagnostics exist for the requested Controller. Diagnostics only exist after Run Controller Diagnostics has been executed.
Comment: No diagnostics exist for the requested Controller.

NO_LUIDS_AVAILABLE_FOR_LUN
ShortDescription : All LUIDs have been exhausted.
LongDescription: Pacman server cannot generate anymore LUIDs. We have generated the maximum number of LUIDs the system is permitted to generate.
Comment: All LUIDs have been exhausted.

NO_LUNS_OF_REQUESTED_STORAGE_CLASS
ShortDescription : No storage is available for the requested storage class in requested Storage Domain
LongDescription: No storage is available for the requested storage class in requested Storage Domain.
Comment: No storage is available for the requested storage class in requested Storage Domain

NO_LUN_NUMBERS_AVAILABLE
ShortDescription : There are no more LUN numbers available.
LongDescription: No more mappings can be created because no more LUN numbers are available. This can only be resolved be deleting mappings to free up LUN numbers.
Comment: There are no more LUN numbers available.

NO_NAS_NODES
ShortDescription : A NAS based request was made on a system that does not have any NAS nodes.
LongDescription: A NAS based request was made on a system that does not have any NAS nodes.
Comment: A NAS based request was made on a system that does not have any NAS nodes.

NO_REPLICATION_TARGET_SPECIFIED
ShortDescription : No replication target was specified in Set Write Split.
LongDescription: At least one FC or iSCSI target port must be specified in Set Write Split.
Comment: No replication target was specified in Set Write Split.

NO_SAN_NODES
ShortDescription : A SAN based request was made on a system that does not have any SAN nodes.
LongDescription: A SAN based request was made on a system that does not have any SAN nodes.
Comment: A SAN based request was made on a system that does not have any SAN nodes.

NO_STAGED_PACKAGE
ShortDescription : A package is not staged on the system from which to update.
LongDescription: A package is not staged on the system from which to update. Stage the appropriate HDD or software update package and try the update request again.
Comment: A package is not staged on the system from which to update.

NO_STORAGE_AVAILABLE_ON_SOURCE_VOLUME
ShortDescription : No storage allocated on the specified source volume.
LongDescription: The source volume must allocate storage capacities to support clone creation.
Comment: The specified source volume must allocate storage for a cloning

NO_STORAGE_AVAILABLE_ON_SYSTEM
ShortDescription : The system contains insufficient storage space.
LongDescription: The system contains insufficient storage space. Delete some volumes and wait for free space.
Comment: The system contains insufficient storage space.

NO_VALID_HDD_COMPAT_MATRIX_EXISTS
ShortDescription : A valid HDD compatibility matrix does not exist.
LongDescription: The system does not have a valid HDD compatibility matrix installed. This could be because of an invalid package installed, or because no HDD firmware package has been staged. If you come across this error try re-installing the HDD firmware matrix, via Perform HDD Firmware Package Staging, or contact Customer Support.
Comment: A valid HDD compatibility matrix does not exist.

NO_WRITE_SPLIT_CONFIGURED
ShortDescription : Write split has not been configured for LUN.
LongDescription: The LUN has not been configured for remote replication.
Comment: Write split has not been configured for LUN.

NUMBER_INVALID_FORMAT
ShortDescription : The integer format is not valid.
LongDescription: The integer value specified for the field was in an invalid format.
Comment: This error is intended for use by CSI validation code when the value for a field does not conform to a valid number format.

NUMBER_SCANCYCLES_OUT_OF_RANGE
ShortDescription : The value specified for the number of n-hour scan cycles is out of range.
LongDescription: The value specified for the number of n-hour scan cycles is out of range and actual range should be between 2 to 31.
Comment: The value specified for the number of n-hour scan cycles is out of range.

NUMBER_TOO_LARGE
ShortDescription : A number input as a parameter is too large.
LongDescription: The integer specified for the field exceeded the maximum value allowed.
Comment: A number input as a parameter is too large.

NUMBER_TOO_SMALL
ShortDescription : A number input as a parameter is too small.
LongDescription: The integer specified for the field is below the minimum value allowed.
Comment: A number input as a parameter is too small.

ONE_MB_STRIP_LICENSE_REQUIRED
ShortDescription : This request requires a 1MB Strip license.
LongDescription: This request requires a 1MB Strip license. Install the needed license.
Comment: This request requires a 1MB Strip license.

ONE_MB_STRIP_VOLUME_OR_PROFILE_EXISTS_CANNOT_DELETE_LICENSE
ShortDescription : The system cannot delete license.
LongDescription: The system cannot delete a 1MB Strip license when a performance profile or volume assigned a 1MB strip size exists within the system.
Comment: The system cannot delete a 1MB Strip license when a volume or user defined performance profile with a 1MB strip size exists within the system.

ONE_TIME_EXECUTION_JOB_SCHEDULE_START_TIME_CANNOT_BE_IN_THE_PAST
ShortDescription : The system cannot schedule a one-time job schedule with start time in the past.
LongDescription: Scheduling a one-time execution job schedule in the past runs the job schedule immediately, which would be highly undesirable for jobs like software update.
Comment: The system cannot schedule a one-time job schedule with start time in the past.

ONLY_ONE_ENCLOSURE_CONSOLE_SESSION_IS_ALLOWED
ShortDescription : Only one Enclosure console session is allowed to be open at any given time.
LongDescription: Only one Enclosure console session is allowed to be open at any given time. You must close the current Enclosure console session to open a new one.
Comment: Only one Enclosure console session is allowed to be open at any given time.

ONLY_ONE_CHOICE_ALLOWED
ShortDescription : More than one choice was selected.
LongDescription: Select only one item for this operation.
Comment: This error is intended for use by CSI validation code when more than one choice has been specified for a choice field.

OVERRIDE_FLAG_NOT_PERMITTED_ON_SCHEUDLED_UPDATES
ShortDescription : Override flags for software update are not permitted for scheduled updates.
LongDescription: Override options are not permitted for scheduled software updates. You can do a manual software update specifying the appropriate flags as needed.
Comment: Override flags for software update are not permitted for scheduled updates.

PARAMETER_MISSING
ShortDescription : A parameter is missing.
LongDescription: One or more parameters are missing. Contact Customer Support.
Comment: This error is intended for use by CSI validation code when no value for a field was specified but, according to the MDL definition, the value is required.

PARAMETER_NOT_CONFIGURABLE_FOR_DEFAULT_ROUTE
ShortDescription : Parameter is not configurable for a default route.
LongDescription: The request specified a parameter that is not configurable on a default route.
Comment: The parameter is not allowed for a default route.

PARAMETER_REQUIRED_FOR_STATIC_ROUTE
ShortDescription : Parameter is required for a static route
LongDescription: The request is missing a required parameter for a static route. Specify the required parameter.
Comment: The parameter is required for a static route.

PARAMETER_REQUIRED_FOR_ANTIVIRUS_INFO_DATA
ShortDescription : Parameter is required for a antivirus info data
LongDescription: The request is missing a required parameter for a antivirus info data. Specify the required parameter.
Comment: The parameter is required for a antivirus info data.

PARAMETER_TOO_FEW
ShortDescription : There are not enough parameters specified.
LongDescription: There are not enough parameters specified. Compare your input to what is allowed.
Comment: This error is intended for use by CSI validation code when fewer than the minimum number of values, according to the MDL definition, are specified for a field.

PARAMETER_TOO_MANY
ShortDescription : There are too many parameters specified.
LongDescription: There are too many parameters specified. Compare your input to what is allowed.
Comment: This error is intended for use by CSI validation code when more than the maximum number of values, according to the MDL definition, were specified for this field.

PARENT_FILESYSTEM_NOT_FOUND
ShortDescription : The filesystem relationship is not valid.
LongDescription: A filesystem tier specified a parent filesystem that does not exist.
Comment: A filesystem tier specified a parent filesystem that does not exist.

PARENT_VOLUME_GROUP_NOT_FOUND
ShortDescription : The volume group relationship is not valid.
LongDescription: A volume group specified a parent that does not exist.
Comment: A volume group specified a parent that does not exist.

PASSWORD_AND_RETYPE_PASSWORD_MISMATCH
ShortDescription : The password and the password retyped are not the same.
LongDescription: The password and the password retyped are not the same. Enter the password and the retyped password in the command and try again.
Comment: The password and the password retyped are not the same.

PASSWORD_AND_RETYPE_PASSWORD_REQUIRED
ShortDescription : Both the password and the password retyped must be supplied.
LongDescription: Both the password and the password retyped must be supplied. Enter the password and the password retyped in the command and try again.
Comment: Both the password and the password retyped must be supplied.

PASSWORD_EXPIRED
ShortDescription : The password has expired and must be changed.
LongDescription: The password has expired and must be changed.
Comment: The password has expired and must be changed.

PASSWORD_MUST_CONTAIN_AT_LEAST_ONE_DIGIT
ShortDescription : The password must contain at least one digit.
LongDescription: The password must contain at least one digit. Refer to documentation for password validity requirements.
Comment: The password must contain at least one digit.

PASSWORD_MUST_CONTAIN_AT_LEAST_ONE_LOWER_CASE_LETTER
ShortDescription : The password must contain at least one lower case letter.
LongDescription: The password must contain at least one lower case letter. Refer to documentation for password validity requirements.
Comment: The password must contain at least one lower case letter.

PASSWORD_MUST_CONTAIN_AT_LEAST_ONE_SPECIAL_CHARACTER
ShortDescription : The password must contain at least one special character.
LongDescription: The password must contain at least one special character. Refer to documentation for password validity requirements.
Comment: The password must contain at least one special character.

PASSWORD_MUST_CONTAIN_AT_LEAST_ONE_UPPER_CASE_LETTER
ShortDescription : The password must contain at least one upper case letter.
LongDescription: The password must contain at least one upper case letter. Refer to documentation for password validity requirements.
Comment: The password must contain at least one upper case letter.

PASSWORD_MUST_NOT_CONTAIN_A_DICTIONARY_WORD
ShortDescription : The password must not contain a dictionary word.
LongDescription: The password must not contain a dictionary word. Refer to documentation for password validity requirements.
Comment: The password must not contain a dictionary word.

PASSWORD_TOO_SHORT
ShortDescription : The password is too short.
LongDescription: The password is too short. Refer to documentation for password validity requirements.
Comment: The password is too short.

PASSWORD_TOO_LONG
ShortDescription : The password is too long.
LongDescription: The password is too long. Refer to documentation for password validity requirements.
Comment: The password is too long.

PASSWORD_USED_PREVIOUSLY
ShortDescription : The password cannot be used since it has been used previously.
LongDescription: The password cannot be used since it has been used previously.
Comment: The password cannot be used since it has been used previously.

PCP_SHUTDOWN_COMMAND_FAILED
ShortDescription : Not able to shut down the system.
LongDescription: Not able to shut down the system, try again.
Comment: Not able to shut down the system.

PERFORMANCE_OPTIMIZING_SCAN_CYCLE_INVALID
ShortDescription : The value specified for the performance-optimizing scan cycle is out of range.
LongDescription: The value specified for the performance-optimizing scan cycle is out of range and actual range should be between 1 to 168.
Comment: The value specified for the performance-optimizing scan cycle is out of range.

PERIODIC_CALL_HOME_SCHEDULE_EXCEEDS_TIME_LIMIT
ShortDescription : The periodic Call-Home schedule exceeds time limit.
LongDescription: The periodic Call-Home schedule exceeds time limit. Choose a smaller time interval.
Comment: The periodic Call-Home schedule exceeds time limit.

PERSISTENCE_ERROR
ShortDescription : An error occurred accessing or setting system settings.
LongDescription: An error occurred accessing or setting system settings.
Comment: Persistence responded with an error.

PERSISTENCE_INSUFFICIENT
ShortDescription : There are not enough Enclosures present to store the system settings.
LongDescription: There are not enough Enclosures present to store the system settings.
Comment: There are not enough vLUNs present to create persistence vLUN.

PILOT_IP_ADDR_NOT_SET
ShortDescription : Pilot IP address was not updated to SAN component.
LongDescription: The Pilot IP address has not been updated to the SAN component for use with the Oracle FS Path Manager host side drivers.
Comment: Startup needs an UPDATE_PILOT_INFO for SAN configuration.

PILOT_SOFTWARE_UPDATE_FAILED
ShortDescription : The update of Pilot software failed.
LongDescription: The update of Pilot software failed, try the update again.
Comment: The update of Pilot software failed.

PILOT_SSN_DOES_NOT_MATCH_SYSTEM_SSN
ShortDescription : The Pilot system serial number does not match the system serial number.
LongDescription: The Pilot system serial number does not match the system serial number. Contact Customer Support.
Comment: The Pilot SSN did not match what was on the Enclosures.

PING_INTERNAL_FAILURE
ShortDescription : The ping was not issued due to an internal error.
LongDescription: The ping was not issued due to an internal error. Check the hardware and try again.
Comment: The ping was not issued due internal Controller failure.

PITMAN_TOPOLOGY_VIOLATIONS_EXIST
ShortDescription : The command cannot be performed because topology violations exist.
LongDescription: The command cannot be performed because topology violations exist.
Comment: The command cannot be performed when topology violations exist.

POOLED_RAID10_LICENSE_REQUIRED
ShortDescription : This request requires a Pooled RAID 10 license.
LongDescription: This request requires a Pooled RAID 10 license. Install the needed license.
Comment: This request requires a Pooled RAID 10 license.

PORT_DOES_NOT_EXIST_ON_HBA
ShortDescription : The port specified does not exist on the Controller's HBA.
LongDescription: When configuring a Controller's HBA port, the port number specified for the HBA is not a port number that exists on the Controller's HBA.
Comment: The port specified does not exist on the Controller's HBA.

PORT_LINK_DOWN
ShortDescription : The ping was not issued because the port link is down.
LongDescription: The ping was not issued because the port link is down. Check the hardware and try again.
Comment: The ping was not issued because the port link is down.

POST_ENCLOSURE_NON_DISRUPTIVE_UPDATE_VERSION_CHECK_FAILED
ShortDescription : A non-disruptive software update failed because one or more Enclosure versions was incorrect.
LongDescription: A non-disruptive software update failed because one or more Enclosure versions was incorrect.
Comment: A software update failed because one or more Enclosure versions was incorrect.

POST_CONTROLLER_NON_DISRUPTIVE_UPDATE_VERSION_CHECK_FAILED
ShortDescription : A non-disruptive software update failed because one or more Controller versions was incorrect.
LongDescription: A non-disruptive software update failed because one or more Controller versions was incorrect.
Comment: A software update failed because one or more Controller versions was incorrect.

POWER_MANAGEMENT_LICENSE_REQUIRED
ShortDescription : This request requires a Power Management license.
LongDescription: This request requires a Power Management license. Install the needed license.
Comment: This request requires a Power Management license.

PREPARE_ENCLOSURE_FRU_STATUS_INVALID
ShortDescription : The process of preparing an Enclosure FRU failed.
LongDescription: A prepare Enclosure request for replacing a FRU in the Enclosure failed due to an unexpected status. Try again. If the problem persists, contact Customer Support.
Comment: Prepare Enclosure FRU operation failed due to unexpected status.

PREPARE_FOR_DISRUPTIVE_UPDATE_COMMAND_FAILED
ShortDescription : Shutting down of the data path failed.
LongDescription: Shutting down of the data path failed. Make sure all components are normal and try the disruptive update again.
Comment: Shutting down of the data path failed.

PREPARE_CONTROLLER_FRU_FAILED
ShortDescription : The system could not prepare a component for replacement.
LongDescription: The system could not prepare a component for replacement. Try again, and if the trouble persists, contact Customer Support.
Comment: The system could not prepare a component for replacement.

PRIMARY_ADMINISTRATOR_MUST_HAVE_EMAIL_ADDRESS
ShortDescription : The primary administrator must have an email address.
LongDescription: The primary administrator must have an email address.
Comment: The primary administrator must have an email address.

PRIMARY_STORAGE_DOMAIN_CANNOT_BE_FOUND
ShortDescription : The primary Storage Domain cannot be found.
LongDescription: The primary Storage Domain cannot be found.
Comment: The primary Storage Domain cannot be found. The system must always contain exactly one primary Storage Domain. The error is a serious situation.

PROVISIONING_CHANGE_NOT_PERFORMED
ShortDescription : A requested provisioning change was not performed.
LongDescription: A requested provisioning change was not performed because a another provisioning change failed in the same command.
Comment: A requested provisioning change was not performed.

PSG_VS_ERROR_BAD_ETHERNET_NUMBER
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

PSG_VS_ERROR_BAD_NODE_LIST
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

PSG_VS_ERROR_DUPLICATE_ROUTE_DESTINATION
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

PSG_VS_ERROR_FILE_INVALID_DOMAIN_NAME
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

PSG_VS_ERROR_FILE_SERVER_NOT_DISABLED
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

PSG_VS_ERROR_FILE_SERVER_SUID_NOT_FOUND
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

PSG_VS_ERROR_INVALID_AGGREGATION
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

PSG_VS_ERROR_INVALID_NUMBER_AG_GROUPS
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

PSG_VS_ERROR_INVALID_NUMBER_OF_SERVERS
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

PSG_VS_ERROR_INVALID_OPERATION_FLAGS
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

PSG_VS_ERROR_INVALID_ROUTE
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

PSG_VS_ERROR_INVALID_SERVER_ADDRESS
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

PSG_VS_ERROR_INVALID_VLAN_TAG
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

PSG_VS_ERROR_NO_VIFS_IN_FS_CONFIG
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

PSG_VS_ERROR_NSS_INVALID_LOOKUP_ORDER
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

PSG_VS_ERROR_NSS_TOO_MANY_LOOKUP_ENTRIES
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

PSG_VS_ERROR_SA_FAMILY_NOT_SUPPORTED
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

PSG_VS_ERROR_SUID_VIFID_MISMATCH
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

PSG_VS_ERROR_SUID_VSID_MISMATCH
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

PSG_VS_ERROR_TOO_MANY_DEFAULT_ROUTES
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

PSG_VS_ERROR_TOO_MANY_FILE_SERVERS
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

PSG_VS_ERROR_TOO_MANY_ROUTES
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

PSG_VS_ERROR_TOO_MANY_STATIC_ROUTES
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

PSG_VS_ERROR_TOO_MANY_VIFS
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

PSG_VS_ERROR_UNSUPPORTED_MTU
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

PSG_VS_ERROR_VIFID_VSID_MISMATCH
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

PSG_VS_ERROR_VIF_IP_ADDRESS_CONFLICT
ShortDescription : UNDEFINED_SHORT_DESCRIPTION
LongDescription: UNDEFINED_LONG_DESCRIPTION
Comment: UNDEFINED_COMMENT

QUALITY_OF_SERVICE_PARAMETER_MISSING
ShortDescription : This field is required for a volume. This field must be set or a Performance Profile must be assigned to the volume.
LongDescription: This field is required for a volume. This field must be set or a Performance Profile must be assigned to the volume.
Comment: This field is required when creating or modifying a volume. The Redundnacy and RelativePriority fields must set or a Performance Profile must be assigned to the volume.

QUOTA_COLLECTION_FAILED
ShortDescription : The quota collection failed.
LongDescription: The quota collection failed. Try again, and if the trouble persists, contact Customer Support.
Comment: The quota collection failed.

QUOTA_FILE_DOES_NOT_EXIST
ShortDescription : There is no generated quota file for the filesystem specified.
LongDescription: There is no generated quota file for the filesystem specified.
Comment: There is no generated quota file for the filesystem specified.

QUOTA_PATH_MUST_BE_A_DIRECTORY
ShortDescription : The specified quota path must be a directory.
LongDescription: The specified quota path must be a directory.
Comment: The quota path specified must be a directory.

RAID10_NOT_PERMITTED_WITH_1MB_STRIP_SETTING
ShortDescription : The system cannot configure a performance profile with RAID 10 and 1 MB strip.
LongDescription: The system cannot configure a performance profile with RAID 10 and 1 MB strip. Also you cannot configure a profile with an access bias of random and an I/O bias of read with 1 MB strip. Adjust your profile settings and retry your request.
Comment: The system cannot configure a performance profile with RAID 10 and 1 MB strip.

RAID10_VOLUME_OR_PROFILE_EXISTS_CANNOT_DELETE_LICENSE
ShortDescription : The system cannot delete the license.
LongDescription: The system cannot delete a Pooled RAID10 license when a performance profile or volume assigned a RAID level 10 setting exists within the system.
Comment: The system cannot delete a Pooled RAID10 license when a performance profile or volume of RAID level 10 exists within the system.

RAID_CONTROLLER_DOES_NOT_EXIST
ShortDescription : RAID controller does not exist.
LongDescription: RAID controller does not exist. Choose a valid number for the RAID controller.
Comment: RAID controller does not exist.

RAID_FIRMWARE_INVALID
ShortDescription : The RAID firmware did not match the hardware.
LongDescription: In system coldstart, the RAID firmware did not match acceptable value on at least one RAID Controller.
Comment: In system coldstart or node rejoin, RAID firmware did not match acceptable value on at least one RAID controller.

REHOME_NOT_ALLOWED_BBM
ShortDescription : The system cannot reassign the volume to another Controller.
LongDescription: The battery backed memory was not shut down properly. This prevents the system from reassigning the volume to another Controller. Contact Customer Support.
Comment: Rehome is not allowed because BBM was not shut down properly.

REHOME_NOT_ALLOWED_COPY_NOT_COMPLETE
ShortDescription : The system cannot reassign the volume to another Controller.
LongDescription: The background copy is not complete. This prevents the system from reassigning the volume to another Controller. Wait and try again.
Comment: Rehome is not allowed because the background copy is not complete.

REHOME_NOT_ALLOWED_FAILED_NODE
ShortDescription : The system cannot reassign the volume to another Controller.
LongDescription: The owning Controller is missing or failed and may contain battery backed memory data. This prevents the system from reassigning the volume to another Controller. Contact Customer Support.
Comment: Rehome is not allowed. Owning node is missing or failed and may contain BBM.

REPLICATION_VERSION_NOT_SUPPORTED
ShortDescription : MaxRep Replication Engine Version not supported.
LongDescription: MaxRep Replication Engine Version not supported.
Comment: MaxRep Replication Engine Version not supported.

REPORT_FILE_DOWNLOAD_FAILED
ShortDescription : An error occurred while downloading a report file.
LongDescription: An error occurred while downloading a report file. Most likely this indicates a file system failure on the Pilot.
Comment: An error occurred while downloading a report file.

REPORT_FILE_GENERATION_FAILED
ShortDescription : An error occurred while generating a report file.
LongDescription: An error occurred while generating a report file. Most likely this indicates a file system failure on the Pilot.
Comment: An error occurred while generating a report file.

REPOSITORY_EXISTS_CANNOT_DELETE_LICENSE
ShortDescription : The system cannot delete a license.
LongDescription: The system cannot delete a LUN Clone or Filesystem Clone license when a filesystem or LUN with a repository exists on the system and no other licensed feature is installed to make use of the repository.
Comment: The system cannot delete a LUN Clone or Filesystem Clone license when a filesystem or LUN with a repository exists on the system and no other licensed feature is installed to make use of the repository.

REPOSITORY_MUST_BE_LARGER_THAN_ALLOCATED_CAPACITY
ShortDescription : The repository of a filesystem or LUN must be greater than or equal to the repository's current allocated capacity.
LongDescription: The repository of a filesystem or LUN must be greater than or equal to the repository's current allocated capacity.
Comment: The repository of a filesystem or LUN must be greater than or equal to the repository's current allocated capacity.

REPOSITORY_STATUS_INCOMPLETE
ShortDescription : Clone storage space status cannot be determined.
LongDescription: Clone storage space status cannot be determined.
Comment: The system cannot determine the status of the repository.

REQUEST_TOO_LARGE
ShortDescription : The request is too large.
LongDescription: The request is too large for the Controller memory.
Comment: The system cannot allocate enough task memory because of too many request ops.

REQUEST_UNRECOGNIZED_ERROR
ShortDescription : The request is not recognized.
LongDescription: The request type was not recognized. Make sure that your client version matches the Oracle FS System version. If the versions do match, contact Customer Support.
Comment: The request type was not recognized by the server.

REQUIRED_FIELDS_FOR_NON_WORLD_ACCESS_TYPE
ShortDescription : For host entries that are not of world access type, the host name, net mask, and host mask type must be specified.
LongDescription: For host entries that are not of world access type, the host name, net mask, and host mask type must be specified.
Comment: For host entries that are not of world access type, the host name, net mask, and host mask type must be specified.

RESTART_COMMAND_FAILED
ShortDescription : A request to restart the system failed.
LongDescription: A request to restart the system failed, try the request again.
Comment: A request to restart the system failed.

RESTART_PILOTS_COMMAND_FAILED
ShortDescription : A requested restart of the Pilots failed.
LongDescription: A requested restart of the Pilots failed, try the update again.
Comment: A requested restart of the Pilots failed.

RETENTION_PERIODS_MUST_BE_ASCENDING
ShortDescription : Retention periods must be satisfy the ordering {minimum, default, maximum}.
LongDescription: Retention periods must be satisfy the ordering {minimum, default, maximum}.
Comment: Retention periods must be satisfy the ordering {minimum, default, maximum}.

RETENTION_PERIOD_CANNOT_BE_REDUCED
ShortDescription : Retention periods cannot be reduced.
LongDescription: Retention periods cannot be reduced.
Comment: Retention periods cannot be reduced.

RETENTION_PERIOD_OUT_OF_RANGE
ShortDescription : The retention period is not within a valid range. Retention periods be 1-30 days, 1-11 months or 1-30 years.
LongDescription: The retention period is not within a valid range. Retention periods be 1-30 days, 1-11 months or 1-30 years.
Comment: Valid retention periods are 1-30 days, 1-11 months or 1-30 years.

SAN_HOST_AUTHENTICATION_HMAC_INVALID
ShortDescription : The provided SAN host authentication HMAC does not match Pacman's HMAC.
LongDescription: The provided SAN host authentication HMAC does not match Pacman's HMAC.
Comment: The SAN host authentication hmac does not match Pacman's HMAC.

SAN_INITIATOR_DOES_NOT_EXIST
ShortDescription : The specified SAN initiator does not exist.
LongDescription: The specified SAN initiator does not exist.
Comment: The SAN initiator does not exist.

SAN_INITIATOR_PROTOCOL_MISMATCH
ShortDescription : The specified SAN protocol for the LUN zoning does not match the protocol supported by the specified initiators.
LongDescription: The specified SAN protocol for the LUN zoning does not match the protocol supported by the specified initiators.
Comment: The SAN initiator protocol in the zoning does not match the initiator itself.

SCHEDULED_JOB_ALREADY_EXISTS
ShortDescription : The job that has been requested to be scheduled is already present.
LongDescription: The job that has been requested to be scheduled is already present.
Comment: The job that has been requested to be scheduled is already present.

SCHEDULED_JOB_NOT_RESCHEDULABLE
ShortDescription : The scheduled job requested to be rescheduled was related to another job.
LongDescription: The scheduled job requested to be scheduled related to another job. Update the job to one that is currently scheduled.
Comment: The scheduled job requested to be rescheduled was related to another job.

SCHEDULED_JOB_REMOVE_ERROR
ShortDescription : The scheduled job requested to be removed was not found.
LongDescription: The scheduled job requested to be removed was not found. Update the job to one that is currently scheduled.
Comment: The scheduled job requested to be removed was not found.

SCHEDULED_JOB_WILL_NEVER_FIRE
ShortDescription : The requested scheduled job will never execute.
LongDescription: The requested scheduled job will never execute. Update the scheduling parameters and reschedule.
Comment: The requested scheduled job will never execute.

SCHEDULER_CREATE_TRIGGER_ERROR
ShortDescription : The scheduler is not able to create a trigger.
LongDescription: The scheduler is not able to create a trigger. Update the parameters of the schedule and try again.
Comment: The scheduler is not able to create a trigger.

SCHEDULER_PAUSE_ERROR
ShortDescription : The scheduler is not able to pause the given job.
LongDescription: The scheduler is not able to pause the given job. Check the job that is being paused and try again.
Comment: The scheduler is not able to pause the given job.

SCHEDULER_RESCHEDULE_ERROR
ShortDescription : The scheduler is not able to reschedule a job.
LongDescription: The scheduler is not able to reschedule a job. Check the parameters of the schedule and job and try again.
Comment: The scheduler is not able to reschedule a job.

SCHEDULER_RESUME_ERROR
ShortDescription : The scheduler is not able to resume the given job.
LongDescription: The scheduler is not able to resume the given job. Check the job that is being resumed and try again.
Comment: The scheduler is not able to resume the given job.

SCHEDULER_UNSCHEDULE_ERROR
ShortDescription : The scheduler is not able to remove a job.
LongDescription: The scheduler is not able to remove a job. Check the parameters of the schedule and job and try again.
Comment: The scheduler is not able to remove a job.

SCP_AUTHENTICATION_FAILURE
ShortDescription : The Call-Home operation was not able to authenticate with the Call-Home server.
LongDescription: The Call-Home operation was not able to authenticate with the Call-Home server, verify the server is correct and try again.
Comment: The Call-Home operation was not able to authenticate with the Call-Home server.

SCP_CONNECTION_FAILURE
ShortDescription : The Call-Home operation was not able to connect to the SCP server.
LongDescription: The Call-Home operation was not able to connect to the SCP server, verify the server is correct and try again.
Comment: The Call-Home operation was not able to connect to the SCP server.

SCP_SECURE_CONNECTION_FAILURE
ShortDescription : The Call-Home operation was not able to establish a secure connection to the SCP server.
LongDescription: The Call-Home operation was not able to establish a secure connection to the SCP server, verify the server is correct and try again.
Comment: The Call-Home operation was not able to establish a secure connection to the SCP server.

SCP_TRANSFER_FAILURE
ShortDescription : The transfer of the Call-Home bundle over SCP encountered an error.
LongDescription: The transfer of the Call-Home bundle over SCP encountered an error.
Comment: The transfer of the Call-Home bundle over SCP encountered an error.

SECURE_WORMFS_EXISTS_CANNOT_DELETE_LICENSE
ShortDescription : The SecureWORMfs feature license cannot be deleted.
LongDescription: The system cannot delete the SecureWORMfs license until after all SecureWORMfs volumes have been deleted.
Comment: The SecureWORMfs feature license cannot be deleted while a SecureWORMfs exists on the system.

SECURE_WORMFS_LICENSE_REQUIRED
ShortDescription : This request requires a SecureWORMfs license.
LongDescription: This request requires a SecureWORMfs license. Install the needed license.
Comment: This request requires a SecureWORMfs license.

SECURE_WORMFS_MUST_ENFORCE_VOLUME_RETENTION
ShortDescription : A SecureWORMfs cannot be downgraded to a Standard SecureWORMfs.
LongDescription: A SecureWORMfs cannot be downgraded to a Standard SecureWORMfs; it must enforce volume retention.
Comment: A SecureWORMfs cannot be downgraded to a Standard SecureWORMfs.

SECURE_WORMFS_PARAMETER_MISSING
ShortDescription : This field is a required field of a SecureWORMfs.
LongDescription: This field is a required field of a filesystem that enforces file retention.
Comment: This field is a required field of a SecureWORMfs.

SECURE_WORMFS_REQUIRES_NTP_ENABLED
ShortDescription : NTP must be enabled on the system to support a SecureWORMfs.
LongDescription: NTP must be enabled on the system to support a SecureWORMfs.
Comment: NTP must be enabled on the system to support a SecureWORMfs.

SET_BUDDY_NODENAME_UNSUCCESSFUL
ShortDescription : The system is unable to set the partner node of a Controller, which coldstarted without the partner Controller.
LongDescription: The system is unable to set the partner node of a Controller, which coldstarted without the partner Controller.
Comment: The system is unable to set the partner node of a Controller, which coldstarted without the partner Controller present

SET_TIME_INVALID_ACCOUNT_PERMISSIONS
ShortDescription : The permissions are not valid to execute set time command.
LongDescription: Only support, primary administrator, or administrator1 accounts are allowed to execute the set time command.
Comment: The set time command requires the correct account to be authenticated.

SLAT_DECOMMISSION_NO_SPACE
ShortDescription : Cannot exclude drive groups.
LongDescription: An attempt was made to exclude the last drive group of a storage class in a storage domain. But there is insufficient spare space elsewhere to hold the data on that drive group, so the exclude failed.
Comment: Cannot exclude drive groups.

SNAPFS_EXISTS_CANNOT_DELETE_LICENSE
ShortDescription : The SnapFS feature license cannot be deleted.
LongDescription: The system cannot delete a SnapFS feature license until all filesystem snapshots have been deleted.
Comment: The SnapFS feature license cannot be deleted when a SnapFS exists on the system.

SNAPFS_LICENSE_REQUIRED
ShortDescription : This request requires a SnapFS license.
LongDescription: This request requires a SnapFS license. Install the needed license.
Comment: This request requires a SnapFS license.

SNAPFS_SCHEDULE_EXISTS_CANNOT_DELETE_LICENSE
ShortDescription : The SnapFS feature license cannot be deleted.
LongDescription: The system cannot delete a Snap FS feature license until after all scheduled filesystem snapshots have been deleted.
Comment: The SnapFS feature license cannot be deleted while a scheduled SnapFS exists on the system.

SNMP_LICENSE_REQUIRED
ShortDescription : This request requires an SNMP license.
LongDescription: This request requires an SNMP license. Install the SNMP license.
Comment: This request requires an SNMP license.

SOFTWARE_NOT_IN_WORKS_WITH_RANGE
ShortDescription : A valid range of software releases supported is not listed in this software update.
LongDescription: The compatibility matrix specifies a range of valid software releases that can be used for a particular software component. This software update does not contain a range of valid software releases supported for this update. Check the package and try again.
Comment: A valid range of software releases supported is not listed in this software update.

SOFTWARE_UPDATE_FAILED_CUSTOMER_SUPPORT_REQUIRED
ShortDescription : A software update failed. Contact Customer Support.
LongDescription: A software update failed. Contact Customer Support.
Comment: A software update request failed with no possible or successful recovery path.

SOFTWARE_UPDATE_FAILED_RETRY_NEEDED
ShortDescription : A software update failed. Try again. If the problem persists, contact Customer Support.
LongDescription: A software update failed. Try again. If the problem persists, contact Customer Support.
Comment: A software update request failed but completed a successful recovery path.

SOFTWARE_WORKS_WITH_NOT_DEFINED
ShortDescription : A valid software identification section is not defined for the software.
LongDescription: The compatibility matrix specifies which software works with a particular software component. This software update does not contain the proper information to indicate which software works with this software update. Check the package and try again.
Comment: A valid software identification section is not defined for the software update.

SOURCE_FILESYSTEM_DOES_NOT_EXIST
ShortDescription : The specified source filesystem does not exist.
LongDescription: The specified source filesystem does not exist. Check the ID and try again.
Comment: The specified source filesystem does not exist.

SOURCE_FILESYSTEM_OFFLINE
ShortDescription : A filesystem copy or clone cannot be created when the source filesystem is offline.
LongDescription: A filesystem copy or clone cannot be created when the source filesystem is offline.
Comment: A filesystem copy or clone cannot be created when the source filesystem is offline.

SOURCE_FILESYSTEM_TIER_OFFLINE
ShortDescription : The source filesystem tier is offline.
LongDescription: The source filesystem tier is offline.
Comment: The source filesystem tier is offline.

SOURCE_HAS_NO_REPOSITORY
ShortDescription : The source volume does not have a repository.
LongDescription: The source volume does not have a repository.
Comment: The source volume does not have a repository.

SOURCE_LUN_DOES_NOT_EXIST
ShortDescription : The specified source LUN does not exist.
LongDescription: The specified source LUN does not exist. Check the ID and try again.
Comment: The specified source LUN does not exist.

SOURCE_LUN_OFFLINE
ShortDescription : A LUN Copy or Clone cannot be created when the source LUN is offline.
LongDescription: A LUN Copy or Clone cannot be created when the source LUN is offline.
Comment: A LUN Copy or Clone cannot be created when the source LUN is offline.

SOURCE_STORAGE_DOMAIN_FOR_MOVE_ENCLOSURES_NOT_FOUND
ShortDescription : The source Storage Domain for this Move Enclosure request cannot be found.
LongDescription: The source Storage Domain as defined in one or more Enclosures to be moved by this Move Enclosure request cannot be found.
Comment: In a Move Enclosure request, the source Storage Domain is inferred by the Enclosures that are to be moved to the target Storage Domain. Since the source Storage Domain is not specified in the request, there is no FieldDatum to be flagged with an "IDENTIFIER_NOT_FOUND" error.

SOURCE_VOLUME_NOT_DEFINED
ShortDescription : The Source volume is not defined.
LongDescription: The Source volume is not defined.
Comment: The Source volume is not defined.

SOURCE_VOLUME_RESTORE_IN_PROGRESS
ShortDescription : The volume operation cannot be performed while a restore is in progress.
LongDescription: The volume operation cannot be performed while a restore is in progress.
Comment: The volume operation cannot be performed while a restore is in progress.

SPARSE_INFILL_FAILURE
ShortDescription : There was a failure in completing thin provisioning in-fill request.
LongDescription: There was a failure in completing thin provisioning in-fill request. Check the hardware.
Comment: The system is unable to fulfill sparse in-fill request.

SSH_ACCESS_ALREADY_DISABLED
ShortDescription : The SSH connection to the Pilot is already disabled.
LongDescription: The SSH connection to the Pilot is already disabled.
Comment: The SSH connection to the Pilot is already disabled.

SSH_ACCESS_LICENSE_REQUIRED
ShortDescription : This request requires an SSH Access license.
LongDescription: This request requires an SSH Access license. Install the needed license.
Comment: This request requires an SSH Access license.

STAGE_SOFTWARE_COMMAND_FAILED
ShortDescription : Moving of software during an update failed.
LongDescription: Moving of software during an update failed. Try the update again.
Comment: Moving of software during an update failed.

START_DHCP_COMMAND_FAILED
ShortDescription : The DHCP was not re-enabled.
LongDescription: The DHCP was not re-enabled. Restart the Pilots.
Comment: The DHCP was not re-enabled.

STATISTICS_COLLECTION_FAILURE
ShortDescription : The collection of statistics failed.
LongDescription: The collection of statistics failed.
Comment: The collection of statistics failed.

STATISTICS_FILTER_INTERNAL_ERROR
ShortDescription : The system is unable to apply this filter.
LongDescription: Something unexpected went wrong when trying to apply this filter. The system is unable to apply this filter.
Comment: Something unexpected went wrong when trying to handle this filter.

STATISTICS_FILTER_NOT_SUPPORTED
ShortDescription : Filtering is not allowed.
LongDescription: This kind of statistics sample cannot be filtered.
Comment: This kind of statistics sample cannot be filtered.

STOPPED_BEFORE_COMPONENT
ShortDescription : The system has stopped the startup sequence at the request of a support command.
LongDescription: The system received a request before being shutdown to stop the startup sequence at a specific point for debugging purposes. A support request to continue the startup process must be issued to continue to the next halt point or complete the startup process.
Comment: Conman has stopped coldstart at a designated halt point, which was presumably specified by a field engineer.

STOP_DHCP_COMMAND_FAILED
ShortDescription : The DHCP was not able to be stopped.
LongDescription: The DHCP was not able to be stopped. Try the update again.
Comment: The DHCP was not able to be stopped.

STORAGE_CLASS_DOES_NOT_EXIST_IN_STORAGE_DOMAIN
ShortDescription : The Storage Domain does not have an Enclosure in the specified storage class.
LongDescription: A LUN or filesystem allocation or modification was requested where the storage class specified in the request does not match any Enclosures belonging to the Storage Domain requested. Put an Enclosure with the specified storage class in the Storage Domain or put the LUN or filesystem into a Storage Domain containing an Enclosure of the requested classification.
Comment: The Storage Domain does not have an Enclosure in the specified storage class.

STORAGE_DOMAIN_DOES_NOT_EXIST
ShortDescription : The specified Storage Domain does not exist.
LongDescription: The specified Storage Domain does not exist. Try again.
Comment: Storage domain does not exist

STORAGE_DOMAIN_EXISTS_CANNOT_DELETE_LICENSE
ShortDescription : The system cannot delete a license.
LongDescription: The system cannot delete a Storage Domain license when more than one Storage Domains exist within the system.
Comment: The system cannot delete a Storage Domain license when more than one Storage Domain exists within the system.

STORAGE_DOMAIN_ILLEGAL_MODIFY
ShortDescription : The storage domain cannot be modified at this time.
LongDescription: The storage domain cannot be modified at this time. Please wait a few minutes and try again.
Comment: The storage domain cannot be modified at this time.

STORAGE_DOMAIN_LICENSE_REQUIRED
ShortDescription : This request requires a Storage Domain license.
LongDescription: This request requires a Storage Domain license. Install the needed license.
Comment: This request requires a Storage Domain license.

STORAGE_DOMAIN_NOT_EXCLUDING_ENCLOSURE
ShortDescription : Storage Domain is not excluding an Enclosure.
LongDescription: The specified Storage Domain is not involved in an exclude Enclosure task.
Comment: Storage Domain is not excluding an Enclosure.

STORAGE_DOMAIN_NOT_SLAT
ShortDescription : Storage Domain does not support auto-tiering.
LongDescription: The attempted command cannot be performed because the storage domain does not support auto-tiering.
Comment: Storage Domain does not support auto-tiering.

STREAM_DATA_TRUNCATED
ShortDescription : The system could not complete the response to a request.
LongDescription: The system could not complete the response to a request. Try the request again.
Comment: CONMAN could not complete streaming the response. Ignore the result and try again.

STRING_INVALID_FORMAT
ShortDescription : The text format is not valid.
LongDescription: The text specified for a field is not in a valid format. Most likely this is because the string does not match an expected regular expression.
Comment: The string does not satisfy the regular expression.

STRING_NOT_NULL_TERMINATED
ShortDescription : The string is not null terminated.
LongDescription: The text specified for field needs to be null terminated. Try again and contact Customer Support if the problem persists.
Comment: The string is not null terminated.

STRING_TOO_LONG
ShortDescription : The text string is too long.
LongDescription: The text specified for a field was too long.
Comment: A string input as a parameter is too long. This error is emitted by the PCLI and CSI validation directly.

STRING_TOO_SHORT
ShortDescription : The text string is too short.
LongDescription: The text specified for a field was too short.
Comment: A string input as a parameter is too short. This error is emitted by the PCLI and CSI validation directly.

SUPPORT_TOOLS_LICENSE_REQUIRED
ShortDescription : This request requires a Support Tools license.
LongDescription: This request requires a Support Tools license. Install the needed license.
Comment: This request requires a Support Tools license.

SYNC_REMOTE_LICENSE_REQUIRED
ShortDescription : This request requires a Synchronous Remote license.
LongDescription: This request requires a Synchronous Remote license. Install the needed license.
Comment: This request requires a Synchronous Remote license.

SYNC_REMOTE_SOURCE_TARGET_LICENSE_REQUIRED
ShortDescription : This request requires a Synchronous Source/Target Remote license.
LongDescription: This request requires a Synchronous Source/Target Remote license. Install the needed license.
Comment: This request requires a Synchronous Source/Target Remote license.

SYSTEM_ALERT_CAN_NOT_BE_DELETED_BY_USER
ShortDescription : System Alert cannot be deleted.
LongDescription: This System Alert is automatically deleted by the system when the condition which caused it is resolved.
Comment: This System Alert cannot be deleted by a user since it has isUseDeletable==false.

SYSTEM_ALERTS_PRESENT_IN_SYSTEM
ShortDescription : This System Alert are existed in the system.
LongDescription: This System Alert are existed in the system.
Comment: This System Alert are existed in the system.

SYSTEM_IN_SHUTDOWN_STATE_ERROR
ShortDescription : This request cannot be processed while the Oracle FS System is in a shutdown state.
LongDescription: This request cannot be processed while the Oracle FS System is in a shutdown state.
Comment: This request cannot be processed while the Oracle FS System is in a shutdown state.

SYSTEM_MUST_HAVE_ONE_PRIMARY_STORAGE_DOMAIN
ShortDescription : The system must have one primary Storage Domain.
LongDescription: The system must have one primary Storage Domain. There must be at least one Storage Domain marked as the "primary" Storage Domain.
Comment: It is an invalid change to set the "primary" field of a Storage Domain to zero.

THIN_PROVISIONING_NOT_SUPPORTED_FOR_STORAGE_CLASS
ShortDescription : Thin Provisioning is not supported for this storage class.
LongDescription: Thin Provisioning is not supported for this storage class. Set Capacity equal to Allocated Logical Capacity.
Comment: Thin Provisioning (capacity < maximum capacity) is not supported for SSD storage classes.

TOO_MANY_ACTIVE_FILESYSTEMS
ShortDescription : The system has reached the maximum number of active filesystems and clone filesystems supported.
LongDescription: The system has reached the maximum number of active filesystems and clone filesystems supported. Delete some active filesystems or clones and try again.
Comment: The maximum number of active filesystems has been reached. This includes clone filesystems.

TOO_MANY_ACTIVE_LUNS
ShortDescription : The system has reached the maximum number of active LUNs and Clone LUNs supported.
LongDescription: The system has reached the maximum number of active LUNs and Clone LUNs supported. Delete some active LUNs or clones and try again.
Comment: The maximum number of active LUNs has been reached. This includes clone LUNs.

TOO_MANY_APM_DRIVER_SESSIONS
ShortDescription : The maximum total number of FSPM driver sessions has been reached.
LongDescription: The maximum total number of FSPM driver sessions has been reached. These are only used by the FSPM drivers and do not affect normal user sessions.
Comment: The maximum total number of FSPM driver sessions has been reached.

TOO_MANY_BACKGROUND_COPIES
ShortDescription : The system has reached the maximum number of background copies supported.
LongDescription: The system has reached the maximum number of background copies supported. Delete some copies and try again.
Comment: The maximum number of background copies has been reached.

TOO_MANY_CIFS_SHARES
ShortDescription : The system has reached the maximum number of CIFS shares supported.
LongDescription: The system has reached the maximum number of CIFS shares supported. Delete some shares and try again.
Comment: The maximum number of CIFS shares has been reached.

TOO_MANY_CLONES
ShortDescription : The system has reached the maximum number of clones supported.
LongDescription: The system has reached the maximum number of clones supported. Delete some clones and try again.
Comment: The maximum number of clones has been reached.

TOO_MANY_CONFIGURED_CHANNELS
ShortDescription : The maximum number of channels that can be configured has been reached.
LongDescription: The maximum number of channels that can be configured has been reached.
Comment: The maximum number of channels that can be configured has been reached.

TOO_MANY_EXTENT_MIGRATIONS
ShortDescription : There are too many active extent migrations.
LongDescription: There are too many active extent migrations. Wait for other extent migrations to complete prior to issuing this request or cancel a running extent migration.
Comment: There are too many active extent migrations.

TOO_MANY_FEATURE_LICENSES
ShortDescription : The maximum number of feature licenses allowed is exceeded.
LongDescription: The maximum number of feature licenses allowed is exceeded.
Comment: There are too many feature licenses.

TOO_MANY_FILESERVERS
ShortDescription : The system has reached the maximum number of File Servers supported.
LongDescription: The system has reached the maximum number of File Servers supported. Delete some File Servers and try again.
Comment: The maximum number of File Servers has been reached.

TOO_MANY_FILESYSTEMS
ShortDescription : The system has reached the maximum number of filesystems and clone filesystems supported.
LongDescription: The system has reached the maximum number of filesystems and clone filesystems supported. Delete some filesystems or clones and try again.
Comment: The maximum number of filesystems has been reached. This includes clone filesystems, active or not active.

TOO_MANY_FILESYSTEM_SNAPSHOTS
ShortDescription : The system has reached the maximum number of filesystem snapshots supported.
LongDescription: The system has reached the maximum number of filesystem snapshots supported. Delete some filesystem snapshots and try again.
Comment: The maximum number of Fielsystem snapshots has been reached.

TOO_MANY_FILESYSTEM_TIERS
ShortDescription : The filesystem has reached the maximum number of tiers supported.
LongDescription: The filesystem has reached the maximum number of tiers supported.
Comment: The maximum number of Fielsystem tiers has been reached.

TOO_MANY_FIRMWARE_VERSIONS
ShortDescription : Too many firmware versions were specified in the request.
LongDescription: Too many firmware versions were specified in the request.
Comment: More than the allowed number of firmware versions were specified in the request.

TOO_MANY_HOSTS_IN_HOST_GROUP
ShortDescription : The limit to the number of hosts allowed in a host group which has been exceeded
LongDescription: There is a limit to the number of hosts allowed in a host group which has been exceeded. Unassociate hosts prior to adding more hosts to the group.
Comment: The limit to the number of hosts allowed in a host group which has been exceeded

TOO_MANY_LUNS
ShortDescription : The system has reached the maximum number of LUNs and Clone LUNs supported.
LongDescription: The system has reached the maximum number of LUNs and Clone LUNs supported. Delete some LUNs or clones and try again.
Comment: The maximum number of LUNs has been reached. This includes clone LUNs, active or not active.

TOO_MANY_LUN_MAPPINGS
ShortDescription : The system has reached the maximum number of LUN mappings supported.
LongDescription: The system has reached the maximum number of LUN mappings supported. Delete some mappings and try again.
Comment: The maximum number of LUN mappings has been reached. This includes clone LUNs, active or not active.

TOO_MANY_NFS_EXPORTS
ShortDescription : The system has reached the maximum number of NFS exports supported.
LongDescription: The system has reached the maximum number of NFS exports supported. Delete some exports and try again.
Comment: The maximum number of NFS exports has been reached.

TOO_MANY_NFS_HOST_ENTRIES
ShortDescription : The system has reached the maximum number of NFS host entries supported.
LongDescription: The system has reached the maximum number of NFS host entries supported. Delete some host entries and try again.
Comment: The maximum number of NFS host entries has been reached.

TOO_MANY_QUOTAS
ShortDescription : The filesystem has reached the maximum number of quotas supported.
LongDescription: The filesystem has reached the maximum number of quotas supported. Delete some LUNs or clones and try again.
Comment: The maximum number of quotas for the filesystem has been reached.

TOO_MANY_REPOSITORIES
ShortDescription : The system has reached the maximum number of Clone Storage Space locations that can be supported.
LongDescription: The system has reached the maximum number of Clone Storage Space locations that can be supported. Delete some LUNs which have Clone Storage Space allocated or set the Clone Storage Space allocation to 0 and try again.
Comment: The maximum number of repositories has been reached.

TOO_MANY_SAN_INITIATORS
ShortDescription : The system has reached the maximum number of SAN initiators supported.
LongDescription: The system has reached the maximum number of SAN initiators supported. Delete some initiators and try again.
Comment: The maximum number of SAN initiators has been reached.

TOO_MANY_SESSIONS_FOR_USERNAME
ShortDescription : The maximum number of sessions for a single account has been reached.
LongDescription: The maximum number of sessions for a single account has been reached. Close some existing sessions to login.
Comment: The maximum number of sessions for a single account has been reached.

TOO_MANY_SIMULTANEOUS_APM_HOST_CONFIGURATIONS
ShortDescription : There are two many active simultaneous APM SAN Host configuration requests being fulfilled.
LongDescription: There are two many active simultaneous APM SAN Host configuration requests being fulfilled. Wait for some of the outstanding configuration requests to complete and then try again.
Comment: There are two many active simultaneous APM SAN Host configuration requests being fulfilled.

TOO_MANY_SNAPSHOT_SCHEDULES_FOR_FILESYSTEM
ShortDescription : The system attempted to create too many snapshot schedules for a filesystem.
LongDescription: The system attempted to create too many snapshot schedules for a filesystem. Either modify an existing schedule to adapt to the new schedule or remove an existing schedule and add another.
Comment: The system attempted to create too many snapshot schedules for a filesystem.

TOO_MANY_STATISTICS_SUBSCRIPTIONS
ShortDescription : Too many statistics were requested at once.
LongDescription: Too many statistics were requested at once. Request fewer statistics or try again later if other users are currently requesting statistics.
Comment: The number of statistics subscriptions is limited to avoid overloading the system.

TOO_MANY_STORAGE_DOMAINS
ShortDescription : The system cannot exceed the maximum number of Storage Domains allowed.
LongDescription: The system cannot exceed the maximum number of Storage Domains allowed.
Comment: The system cannot exceed the maximum number of Storage Domains allowed.

TOO_MANY_TARGET_PORTS_FOR_APPLIANCE
ShortDescription : The maximum total number of target ports for the replication appliance has been reached.
LongDescription: The maximum total number of target ports for the replication appliance has been reached.
Comment: The maximum total number of target ports for the replication appliance has been reached.

TOO_MANY_TOTAL_SESSIONS
ShortDescription : The maximum total number of sessions has been reached.
LongDescription: The maximum total number of sessions has been reached. Close some existing sessions to login.
Comment: The maximum total number of sessions has been reached.

TOO_MANY_VLUNS
ShortDescription : The system has reached the maximum number of volumes, clones, and clone storage space locations that can be supported.
LongDescription: The system has reached the maximum number of volumes, clones, and clone storage space locations that can be supported. Delete some volumes, clones, or clone storage space allocations and try again.
Comment: The maximum number of vLUNs has been reached. This includes clone LUNs, active or not active, metadata vLUNs, and repository vLUNs.

TOO_MANY_VOLUME_GROUPS
ShortDescription : The system limit on the number of volume groups will be exceeded.
LongDescription: The system has a volume group quantity maximum. This action will cause the limit to be exceeded.
Comment: The system may only have X volume groups.

TOO_MUCH_OVERCOMMIT
ShortDescription : Overall system volume maximum capacities have exceeded the allowed amount of overcommitment in the system.
LongDescription: The system has a maximum in relation to current volume capacities and the maximum capacities specified. This action will cause the limit to be exceeded.
Comment: Overall system volume maximum capacities exceed current capacities by too much.

TOPOLOGY_VIOLATIONS_EXIST
ShortDescription : The coldstart process found topology violations.
LongDescription: The coldstart process found topology violations. Fix the topology and restart the system.
Comment: The coldstart process found topology violations.

UNABLE_TO_ACQUIRE_LOCK_ERROR
ShortDescription : The object that you want to modify is being modified or created.
LongDescription: The object that you want to modify is being modified or created. Wait for the outstanding tasks to complete, then try again.
Comment: The system is unable to satisfy the request because the required locks cannot be acquired.

UNABLE_TO_ACQUIRE_LOCK_FOR_CHILD_VOLUME_GROUP
ShortDescription : The object that you want to modify is being modified or created.
LongDescription: The object that you want to modify is being modified or created. Wait for the outstanding tasks to complete, then try again.
Comment: The system is unable to satisfy the request because the required locks cannot be acquired.

UNABLE_TO_ACQUIRE_LOCK_ON_ENCLOSURE_TO_EXCLUDE_FOR_STORAGE_DOMAIN_DELETE_ERROR
ShortDescription : The system is unable to acquire a lock on an Enclosure that needs to be excluded.
LongDescription: The system is unable to acquire a lock on an Enclosure that needs to be excluded so the Storage Domain that contains this Enclosure can be deleted. Verify the changes have not already been made, then submit the request again.
Comment: Before a Storage Domain can be deleted, it cannot contain any Enclosures that have data. If a Storage Domain has an Enclosure that does not have any data, that Enclosure must be excluded before the Storage Domain can be deleted. An Enclosure (As of 9/2/08 there is no way to identify the Enclosure since we started with a Storage Domain) cannot be locked prior to it being excluded.

UNABLE_TO_ACQUIRE_LOCK_ON_CURRENT_PRIMARY_STORAGE_DOMAIN
ShortDescription : The system is unable to acquire lock on the Storage Domain that is currently the primary Storage Domain.
LongDescription: The system is unable to acquire a lock on the Storage Domain that currently the primary Storage Domain. Verify the changes have not already been made, then submit the request again.
Comment: Before a Storage Domain can become the new primary Storage Domain, the current primary Storage Domain must relinquish its primacy. The current primary Storage Domain is current locked and cannot be modified.

UNABLE_TO_ACQUIRE_LOCK_ON_HOST_OWNING_INITIATOR
ShortDescription : The system is unable to acquire a lock on a SAN host.
LongDescription: The system is unable to acquire a lock on a SAN host that controls one or more initiators. The lock needed to be acquired because a create or modify SAN host request was received that attempted to associate the SAN host with initiators that were owned by a different existing SAN host. The other existing SAN host owning those initiators needs to be locked and the initiators need to be removed from its ownership list before this request can be completed. Wait for any other changes to the affected SAN host to be complete and try again.
Comment: The system is unable to acquire a lock on a SAN host that owns the initiators we want to move to a different SAN host.

UNABLE_TO_ACQUIRE_LOCK_ON_MAPPING
ShortDescription : The system is unable to acquire a lock on a mapping.
LongDescription: The system is unable to acquire a lock on a mapping. The lock needed to be acquired because a request was received which attempted to reconcile mappings. Wait for any other changes to the affected SAN hosts to complete and then try again.
Comment: The system is unable to acquire a lock on a mapping that we want to modify or delete.

UNABLE_TO_ACQUIRE_LOCK_ON_SOURCE_STORAGE_DOMAIN_OF_ENCLOSURE_TO_BE_MOVED
ShortDescription : The system is unable to acquire lock on the Storage Domain that currently contains this Enclosure so it can be moved.
LongDescription: The system is unable to acquire a lock on the Storage Domain that currently contains this Enclosure so it can be moved to another Storage Domain. Verify the changes have not already been made, then submit the request again.
Comment: Before an Enclosure can be moved to the target Storage Domain, it must not be in contained by another Storage Domain (the source). It must be exclude from the source, before it can be included into the target.

UNABLE_TO_LOCK_TIER_FOR_FILESYSTEM
ShortDescription : The system is unable to lock a tier for a filesystem being modified or deleted.
LongDescription: The system is unable to satisfy request because the tiers of a filesystem cannot be locked in order to carry out filesystem modification or deletion request. Verify the changes have not already been made, then submit the request again.
Comment: The system is unable to lock a tier for a filesystem being modified or deleted.

UNABLE_TO_OPEN_FILE_FOR_READ
ShortDescription : The system is unable to open the file for reading.
LongDescription: The system is unable to open the user supplied file for reading. Verify the provided file exists and has sufficient permissions for reading, and try again.
Comment: The system is unable to open the file for reading.

UNKNOWN_DRIVE_TYPE
ShortDescription : CONMAN cannot determine the drive type from the model number.
LongDescription: CONMAN cannot determine the drive type from the model number.
Comment: CONMAN cannot determine the drive type from the model number.

UNKNOWN_HARDWARE_PART_NUMBER
ShortDescription : A hardware part number is not recognized.
LongDescription: A hardware part number is not recognized. Change the hardware or load an updated compatibility matrix.
Comment: A hardware part number is not recognized.

UNKNOWN_NOTIFICATION_SOURCE_TYPE
ShortDescription : The source type for a request that notifications be sent from the server is not recognized.
LongDescription: The source type for a request that notifications be sent from the server is not recognized.
Comment: The source type for a request that notifications be sent from the server is not recognized.

UNKNOWN_UPGRADE_PATH_FOR_INSTALLED_SOFTWARE
ShortDescription : The installed software configuration is not a recognized Oracle release package.
LongDescription: The installed software configuration is not a recognized Oracle release package.
Comment: The software components installed on the Oracle FS System are not recognized as an Oracle package release, and the compatibility matrix provides no upgrade path information for the installed software configuration. Only Customer Support users can alter the Oracle FS System software configuration in this state.

UNRECOGNIZED_FEATURE_LICENSE
ShortDescription : The Feature License value does not match a recognized Oracle FS System feature.
LongDescription: The Feature License value does not match a recognized Oracle Fs System feature. Try again or contact Customer Support.
Comment: The Feature License value does not decode to a known system feature.

UNRECOGNIZED_PERFORMANCE_PROFILE_IDENTIFIER
ShortDescription : The performance profile identifier is not recognized.
LongDescription: The performance profile identifier is not recognized.
Comment: The performance profile identifier is not recognized.

UNRECOGNIZED_STATISTICS_KEY_VALUE
ShortDescription : The statistics key value is not recognized.
LongDescription: The statistics key value is not recognized.
Comment: The statistics key value is not recognized.

UNRECOGNIZED_STATISTICS_TYPE
ShortDescription : The statistics type specified is not recognized.
LongDescription: The statistics type specified is not recognized.
Comment: The statistics type specified is not recognized.

UNRECOGNIZED_SYSTEM_RESET_TICKET
ShortDescription : The system reset ticket is not valid.
LongDescription: The system reset ticket is not valid. Try again or contact Customer Support.
Comment: The system reset ticket is not valid.

UNRESOLVED_CONTROLLER_IP
ShortDescription : The system cannot resolve the internal IP address of the specified Controller.
LongDescription: The system cannot resolve the internal IP address of the specified Controller. Contact Customer Support.
Comment: The system cannot resolve the internal IP address of the specified Controller.

UNSATISFIED_REQUEST_INTERNAL_ERROR
ShortDescription : The system is unable to satisfy the request due to internal error.
LongDescription: The system is unable to satisfy the request due to an internal error. Contact Customer Support.
Comment: The system is unable to satisfy the request due to an internal error. This error should only be used in very specific locations.

UNSATISFIED_REQUEST_PMI_COMMUNICATION_ERROR
ShortDescription : The system is unable to complete the task due to an error from a Controller software component.
LongDescription: A request to create, modify, or delete an object cannot be completed properly due to an error from one of the software components. The error is internal. Contact Customer Support.
Comment: The system is unable to satisfy request due to a PMI communication error.

UNSUPPORTED_REQUEST
ShortDescription : This request is not supported.
LongDescription: This request is not supported. If this error is seen, it is because of a bug.
Comment: The request is not supported. This error is mapped to PMI_ENOTSUPP and should not be seen in the field.

UNSUPPORTED_ENCLOSURE_DRIVE
ShortDescription : The Enclosure drive is not supported by the system.
LongDescription: The provided Enclosure drive is not a model that the system can support. Insert an Oracle supported drive.
Comment: The provided Enclosure drive is not supported by the system.

UPDATE_ALREADY_IN_PROGRESS
ShortDescription : A software update operation is already in progress.
LongDescription: A software update operation is already in progress. Wait for the running update operation to complete before attempting a software update.
Comment: A software update operation is already in progress.

UPDATE_ALREADY_SCHEDULED
ShortDescription : A software update has already been scheduled.
LongDescription: A software update has already been scheduled.
Comment: A software update has already been scheduled.

UPDATE_REQUEST_CANNOT_RECUR
ShortDescription : A software update request cannot be scheduled as a recurring request.
LongDescription: A software update request cannot be scheduled as a recurring request. A software update can only be scheduled for one-time execution.
Comment: A software update request cannot recur.

UPDATE_REQUEST_INVALID_START_TIME
ShortDescription : A software update request cannot be scheduled past three days in the future.
LongDescription: A software update request cannot be scheduled for execution at a time greater than three full days past the current date and time.
Comment: The software update request has an invalid start time.

UPDATE_REQUEST_MUST_CONTAIN_ALL_SYSTEM_COMPONENTS
ShortDescription : A software update request must list all system components.
LongDescription: A software update request must list all system components. Even if the request is a for only certain software components, you must explicitly list the component and specify that the installation instruction is "excluded" using the support account.
Comment: A software update request must list all system components.

USER_CAN_ONLY_MODIFY_OWN_ACCOUNT
ShortDescription : The current user can only modify their own account.
LongDescription: Only the Primary Administrator and Administrator 1 can modify other accounts.
Comment: Only the Primary Administrator and Administrator 1 accounts can modify other accounts.

USER_NOT_AUTHORIZED_FOR_REQUEST
ShortDescription : The user must have the appropriate roles assigned to the account.
LongDescription: The user must have the appropriate roles assigned to the account.
Comment: The user must have the appropriate roles assigned to the account.

VERSION_MISMATCH_ERROR
ShortDescription : The object being modified has changed.
LongDescription: The request failed because the object being accessed has changed within the system. Verify the changes have not already been made, then submit the request again.
Comment: The system is unable to satisfy request because the entity being accessed has changed within the system.

VOLUME_COPY_EXISTS_CANNOT_DELETE_LICENSE
ShortDescription : The system cannot delete Volume Copy license.
LongDescription: The system cannot delete Volume Copy license until all in-progress LUN and filesystem copies have been deleted.
Comment: The system cannot delete a Volume Copy license until all in-progress LUN and filesystem copies have been deleted.

VOLUME_COPY_IN_PROGRESS
ShortDescription : Volumes that are in the process of being copied are restricted from modifying their default owner Controller.
LongDescription: Volumes that are in the process of being copied are restricted from modifying their default owner Controller.
Comment: Volumes that are in the process of being copied are restricted from modifying their default owner node.

VOLUME_COPY_LICENSE_REQUIRED
ShortDescription : This request requires a Volume Copy license.
LongDescription: This request requires a Volume Copy license. Install the needed license.
Comment: This request requires a Volume Copy license.

VOLUME_DOES_NOT_EXIST
ShortDescription : The specified volume does not exist.
LongDescription: The specified volume does not exist. Try again.
Comment: The specified volume does not exist

VOLUME_GROUP_BAD_PARENT
ShortDescription : A volume group does not have a valid parent ID.
LongDescription: A volume group does not have a valid parent ID.
Comment: A volume group does not have a valid parent ID.

VOLUME_GROUP_DEPTH_TOO_GREAT
ShortDescription : The system limit on the depth to which volume groups can be nested will be exceeded.
LongDescription: The system has a maximum on the depth to which volume groups can be nested. This action will cause the limit to be exceeded.
Comment: The system can only have volume groups nested X deep.

VOLUME_GROUP_DOES_NOT_EXIST
ShortDescription : The specified volume group does not exist.
LongDescription: The specified volume group does not exist. Try again.
Comment: The specified volume group does not exist.

VOLUME_GROUP_DUPLICATE_NAME
ShortDescription : The specified volume group already exists.
LongDescription: The specified volume group already exists. Try again.
Comment: The specified volume group already exists.

VOLUME_GROUP_ID_MISMATCH
ShortDescription : A volume group with the provided volume group ID does not exist.
LongDescription: A volume group with the provided volume group ID does not exist.
Comment: A volume group does not match the provided volume group ID.

VOLUME_GROUP_NOT_EMPTY
ShortDescription : A volume group is not empty and cannot be deleted.
LongDescription: A volume group with the provided volume group ID is not empty and cannot be deleted.
Comment: A volume group is not empty.

VOLUME_GROUP_NO_PARENT
ShortDescription : A volume group with the provided volume group ID does not have a parent volume group.
LongDescription: A volume group with the provided volume group ID does not have a parent volume group.
Comment: A volume group does not have a parent.

VOLUME_GROUP_ROOT_READ_ONLY
ShortDescription : The root volume group cannot be modified.
LongDescription: The root volume group cannot be modified.
Comment: A root volume group cannot be modified.

VOLUME_GROUP_TOO_SMALL
ShortDescription : The volume group capacity limit specified is insufficient.
LongDescription: The volume group capacity limit specified is insufficient for the volumes and other volume groups maximum capacities contained in the volume group.
Comment: A volume group cannot be less than its children's or volume's maximum capacities.

VOLUME_GROUP_WRONG_CAPACITY
ShortDescription : A volume or volume group cannot fit in an existing parent volume group.
LongDescription: A volume or volume group capacity does not fit in an existing parent volume group. Check the total logical capacities specified do not exceed any parent volume group maximum capacity setting.
Comment: A volume or volume group has the wrong capacity to fit in existing parent volume group.

VOLUME_NOT_HEAD_OF_TREE
ShortDescription : The volume referenced is not a source volume.
LongDescription: The volume referenced is not a source volume.
Comment: The volume SUID does not reference a head of tree.

VOLUME_NOT_PREPARED
ShortDescription : The volume has not completed the prepare phase of creation.
LongDescription: The volume has not completed the prepare phase of creation.
Comment: The volume has not completed the prepare phase of creation.

VOLUME_OF_PROFILE_INVALID_FOR_LUN_CONFIG
ShortDescription : The volume of the performance profile is not valid for a LUN configuration.
LongDescription: The volume of the performance profile is not valid for a LUN configuration.
Comment: The volume of the performance profile is not valid for a LUN configuration.

VOLUME_RESTORE_TARGET_TOO_SMALL
ShortDescription : The system cannot restore a volume if the target of the restore is smaller than the source.
LongDescription: The system cannot restore a volume if the target's capacity of the restore is smaller than the source's capacity.
Comment: The system cannot restore if the target of the restore is smaller than the source.

VTL_LUN_EXISTS_CANNOT_DELETE_LICENSE
ShortDescription : The system cannot delete a Virtual Tape Library license.
LongDescription: The system cannot delete a Virtual Tape Library license until all of the LUNs requiring the Virtual Tape Library license have been deleted.
Comment: The system cannot delete a Virtual Tape Library license until all of the LUNs requiring the Virtual Tape Library license have been deleted.

WARNING_INCOMPLETE_DATA
ShortDescription : The information provided by the response might not be complete.
LongDescription: The information provided by the response might not be complete. Contact Customer Support.
Comment: One or more records in a GET response are incomplete.

WORM_CANNOT_BE_DISABLED_ONCE_ENABLED
ShortDescription : A WORM cannot be disabled once enabled for a filesystem.
LongDescription: A WORM cannot be disabled once enabled for a filesystem.
Comment: A WORM cannot be disabled once enabled for a filesystem.

WORM_CAN_ONLY_BE_ENABLED_AT_CREATION
ShortDescription : A WORM can only be enabled at filesystem creation time.
LongDescription: A WORM can only be enabled at filesystem creation time.
Comment: A WORM can only be enabled at filesystem creation time.

WRONG_PROFILE_TYPE_FOR_LUN
ShortDescription : The profile was not compatible with a LUN.
LongDescription: A LUN was created or modified, and the Performance Profile specified by the request cannot be applied to a LUN. Select a different profile that is allowed for LUNs.
Comment: The profile type cannot be applied to LUN.

WRONG_STATE_FOR_NODE_REJOIN_OR_FAILBACK
ShortDescription : The Controller cannot be failed back or rejoined in its current state.
LongDescription: The Controller is not in a state that allows the Controller to be failed back or rejoined. Controllers can only be failed back or rejoined when the Controller is in a "Ready" or "Slave" state. If the Controller is "Normal", the Controller is already rejoined in the system and resources have been failed back.
Comment: The Controller cannot be failed back or rejoined in the Controller's current state.

FAILED_TO_READ_MARKS_DB_TEXT_FILE
ShortDescription : Pitman marks DB text file not found on server.
LongDescription: Pitman marks DB text file not found on server.
Comment: Pitman marks DB text file not found on server.

MARKS_DB_PARSER_RETURNED_ERROR
ShortDescription : Parser returned error when trying to parse Pitman marks DB binary files on server.
LongDescription: Parser returned error when trying to parse Pitman marks DB binary files on server.
Comment: Parser returned error when trying to parse Pitman marks DB binary files on server.

FAILED_TO_PARSE_MARKS_DB_BINARY_FILE
ShortDescription : Failed to parse Pitman marks DB binary files on server.
LongDescription: Failed to parse Pitman marks DB binary files on server.
Comment: Failed to parse Pitman marks DB binary files on server.

MARKS_DB_BINARY_FILE_NOT_FOUND
ShortDescription : Pitman marks DB binary file not found when trying to parse them to create marks DB text file on server.
LongDescription: Pitman marks DB binary file not found when trying to parse them to create marks DB text file on server.
Comment: Pitman marks DB binary file not found.

PDS_SAN_BAD_CHANNEL
ShortDescription : A SAN port number is invalid.
LongDescription: A SAN port number is invalid.
Comment: A SAN port number is invalid.

PDS_SAN_SLUN_NOT_FOUND
ShortDescription : The SLUN was not found.
LongDescription: The SLUN was not found.
Comment: The SLUN was not found.

PDS_SAN_INVALID_LUN_NUMBER
ShortDescription : The LUN number used was invalid or in use.
LongDescription: The LUN number used was invalid or in use.
Comment: Invalid or in-use LUN number.

PDS_SAN_HOST_TABLE_FULL
ShortDescription : PDS_SAN_HOST_TABLE_FULL
LongDescription: PDS_SAN_HOST_TABLE_FULL
Comment: PDS_SAN_HOST_TABLE_FULL

PDS_SAN_SLUN_EXISTS
ShortDescription : PDS_SAN_SLUN_EXISTS
LongDescription: PDS_SAN_SLUN_EXISTS
Comment: PDS_SAN_SLUN_EXISTS

PDS_SAN_SLUNS_EXCEEDED
ShortDescription : The requested SAN LUN would exceed the maximum number of SAN LUNs.
LongDescription: The requested SAN LUN would exceed the maximum number of SAN LUNs.
Comment: The requested SAN LUN would exceed the maximum number of SAN LUNs.

PDS_SAN_BAD_VLUN
ShortDescription : PDS_SAN_BAD_VLUN
LongDescription: PDS_SAN_BAD_VLUN
Comment: PDS_SAN_BAD_VLUN

PDS_SAN_BAD_PORT_GROUPS
ShortDescription : PDS_SAN_BAD_PORT_GROUPS
LongDescription: PDS_SAN_BAD_PORT_GROUPS
Comment: PDS_SAN_BAD_PORT_GROUPS

PDS_SAN_BAD_SLUN_STATE
ShortDescription : The command that was received could not be completed because of the state of the SAN LUN.
LongDescription: The command that was received could not be completed because of the state of the SAN LUN.
Comment: The command that was received could not be completed because of the state of the SAN LUN.

PDS_SAN_BAD_ZONING
ShortDescription : PDS_SAN_BAD_ZONING
LongDescription: PDS_SAN_BAD_ZONING
Comment: PDS_SAN_BAD_ZONING

PDS_SAN_BAD_OWNER
ShortDescription : There was a problem with the Controller selected as the owner of this SAN LUN
LongDescription: There was a problem with the Controller selected as the owner of this SAN LUN. Check that the controller is not offline.
Comment: There was a problem with the Controller selected as the owner of this SAN LUN

PDS_SAN_BAD_ENABLED_PORTS
ShortDescription : PDS_SAN_BAD_ENABLED_PORTS
LongDescription: PDS_SAN_BAD_ENABLED_PORTS
Comment: PDS_SAN_BAD_ENABLED_PORTS

PDS_SAN_DUPLICATE_HOST
ShortDescription : PDS_SAN_DUPLICATE_HOST
LongDescription: PDS_SAN_DUPLICATE_HOST
Comment: PDS_SAN_DUPLICATE_HOST

PDS_SAN_BAD_HOST_NAME
ShortDescription : PDS_SAN_BAD_HOST_NAME
LongDescription: PDS_SAN_BAD_HOST_NAME
Comment: PDS_SAN_BAD_HOST_NAME

PDS_SAN_OWNER_OFFLINE
ShortDescription : An attempt to move a SAN LUN to an offline Controller failed.
LongDescription: An attempt to move a SAN LUN to an offline Controller failed.
Comment: An attempt to move a SAN LUN to an offline Controller failed.

PDS_SAN_BAD_SSN
ShortDescription : PDS_SAN_BAD_SSN
LongDescription: PDS_SAN_BAD_SSN
Comment: PDS_SAN_BAD_SSN

PDS_SAN_SSN_CHANGE_ATTEMPTED
ShortDescription : PDS_SAN_SSN_CHANGE_ATTEMPTED
LongDescription: PDS_SAN_SSN_CHANGE_ATTEMPTED
Comment: PDS_SAN_SSN_CHANGE_ATTEMPTED

PDS_SAN_NO_CU_NUMBER
ShortDescription : PDS_SAN_NO_CU_NUMBER
LongDescription: PDS_SAN_NO_CU_NUMBER
Comment: PDS_SAN_NO_CU_NUMBER

PDS_SAN_CU_NUMBER_DUPLICATE_GUID
ShortDescription : PDS_SAN_CU_NUMBER_DUPLICATE_GUID
LongDescription: PDS_SAN_CU_NUMBER_DUPLICATE_GUID
Comment: PDS_SAN_CU_NUMBER_DUPLICATE_GUID

PDS_SAN_CU_NUMBER_CHANGE_ATTEMPTED
ShortDescription : Configure payload CU number doesn't match known CU number.
LongDescription: Configure payload CU number doesn't match known CU number.
Comment: Configure payload CU number doesn't match known CU number.

PDS_SAN_BAD_FAILOVER_SEQUENCE
ShortDescription : PDS_SAN_BAD_FAILOVER_SEQUENCE
LongDescription: PDS_SAN_BAD_FAILOVER_SEQUENCE
Comment: PDS_SAN_BAD_FAILOVER_SEQUENCE

PDS_SAN_BAD_SLUN_CAPACITY
ShortDescription : PDS_SAN_BAD_SLUN_CAPACITY
LongDescription: PDS_SAN_BAD_SLUN_CAPACITY
Comment: PDS_SAN_BAD_SLUN_CAPACITY

PDS_SAN_BAD_SLUN_ATTRIBUTES
ShortDescription : PDS_SAN_BAD_SLUN_ATTRIBUTES
LongDescription: BPDS_SAN_BAD_SLUN_ATTRIBUTES
Comment: PDS_SAN_BAD_SLUN_ATTRIBUTES

PDS_SAN_SLUN_NOT_ZONED
ShortDescription : PDS_SAN_SLUN_NOT_ZONED
LongDescription: PDS_SAN_SLUN_NOT_ZONED
Comment: PDS_SAN_SLUN_NOT_ZONED

PDS_SAN_BAD_PROTOCOL
ShortDescription : The protocol value in the protocol field is invalid for the current configuration.
LongDescription: The protocol value in the protocol field is invalid for the current configuration.
Comment: The protocol value in the protocol field is invalid for the current configuration.

PDS_SAN_BAD_NAME_TABLE_INDEX
ShortDescription : PDS_SAN_BAD_NAME_TABLE_INDEX
LongDescription: PDS_SAN_BAD_NAME_TABLE_INDEX
Comment: PDS_SAN_BAD_NAME_TABLE_INDEX

PDS_SAN_BAD_PORT_MASK
ShortDescription : Bad port mask value (e.g. zoning enabled Ports).
LongDescription: Bad port mask value (e.g. zoning enabled Ports).
Comment: Bad port mask value (e.g. zoning enabled Ports).

PDS_SAN_BAD_PORT_NUMBER
ShortDescription : PDS_SAN_BAD_PORT_NUMBER
LongDescription: PDS_SAN_BAD_PORT_NUMBER
Comment: PDS_SAN_BAD_PORT_NUMBER

PDS_SAN_BAD_ISCSI_NAME
ShortDescription : PDS_SAN_BAD_ISCSI_NAME
LongDescription: PDS_SAN_BAD_ISCSI_NAME
Comment: PDS_SAN_BAD_ISCSI_NAME

PDS_SAN_ISCSI_NAME_CHANGE_ATTEMPTED
ShortDescription : PDS_SAN_ISCSI_NAME_CHANGE_ATTEMPTED
LongDescription: PDS_SAN_ISCSI_NAME_CHANGE_ATTEMPTED
Comment: PDS_SAN_ISCSI_NAME_CHANGE_ATTEMPTED

PDS_SAN_BAD_ISCSI_ALIAS
ShortDescription : Misformed alias in iSCSI configuration payload.
LongDescription: Misformed alias in iSCSI configuration payload.
Comment: Misformed alias in iSCSI configuration payload.

PDS_SAN_BAD_CHAP_NAME
ShortDescription : Chap is enabled, but chap name doesn't match the name in the iSCSI configuration payload.
LongDescription: Chap is enabled, but chap name doesn't match the name in the iSCSI configuration payload.
Comment: Chap is enabled, but chap name doesn't match the name in the iSCSI configuration payload.

PDS_SAN_BAD_CHAP_SECRET
ShortDescription : Chap is enabled, but no chap secret in iSCSI configuration payload.
LongDescription: Chap is enabled, but no chap secret in iSCSI configuration payload.
Comment: Chap is enabled, but no chap secret in iSCSI configuration payload.

PDS_SAN_BAD_MTU_BYTES
ShortDescription : Chap is enabled, but no chap secret in iSCSI configuration payload.
LongDescription: Chap is enabled, but no chap secret in iSCSI configuration payload.
Comment: Chap is enabled, but no chap secret in iSCSI configuration payload.

PDS_SAN_DUPLICATE_NAME_TABLE_INDEX
ShortDescription : PDS_SAN_DUPLICATE_NAME_TABLE_INDEX
LongDescription: PDS_SAN_DUPLICATE_NAME_TABLE_INDEX
Comment: PDS_SAN_DUPLICATE_NAME_TABLE_INDEX

PDS_SAN_DUPLICATE_NAME_TABLE_NAME
ShortDescription : PDS_SAN_DUPLICATE_NAME_TABLE_NAME
LongDescription: PDS_SAN_DUPLICATE_NAME_TABLE_NAME
Comment: PDS_SAN_DUPLICATE_NAME_TABLE_NAME

PDS_SAN_ISCSI_NAME_INDEX_NOT_FOUND
ShortDescription : PDS_SAN_ISCSI_NAME_INDEX_NOT_FOUND
LongDescription: PDS_SAN_ISCSI_NAME_INDEX_NOT_FOUND
Comment: PDS_SAN_ISCSI_NAME_INDEX_NOT_FOUND

PDS_SAN_BAD_INITIATOR_CONFIGURE_OPTIONS
ShortDescription : PDS_SAN_BAD_INITIATOR_CONFIGURE_OPTIONS
LongDescription: PDS_SAN_BAD_INITIATOR_CONFIGURE_OPTIONS
Comment: PDS_SAN_BAD_INITIATOR_CONFIGURE_OPTIONS

PDS_SAN_INITIATOR_STILL_CONFIGURED
ShortDescription : PDS_SAN_INITIATOR_STILL_CONFIGURED
LongDescription: PDS_SAN_INITIATOR_STILL_CONFIGURED
Comment: PDS_SAN_INITIATOR_STILL_CONFIGURED

PDS_SAN_ISCSI_INITIATOR_STILL_ZONED
ShortDescription : PDS_SAN_ISCSI_INITIATOR_STILL_ZONED
LongDescription: PDS_SAN_ISCSI_INITIATOR_STILL_ZONED
Comment: PDS_SAN_ISCSI_INITIATOR_STILL_ZONED

PDS_SAN_ISCSI_PING_INTERNAL_FAILURE
ShortDescription : PDS_SAN_ISCSI_PING_INTERNAL_FAILURE
LongDescription: PDS_SAN_ISCSI_PING_INTERNAL_FAILURE
Comment: PDS_SAN_ISCSI_PING_INTERNAL_FAILURE

PDS_SAN_ISCSI_PING_PORT_LINK_DOWN
ShortDescription : Indicates that the iSCSI port is not configured yet.
LongDescription: Indicates that the iSCSI port is not configured yet.
Comment: Indicates that the iSCSI port is not configured yet.

PDS_SAN_BAD_VLAN_ID
ShortDescription : PDS_SAN_BAD_VLAN_ID
LongDescription: PDS_SAN_BAD_VLAN_ID
Comment: PDS_SAN_BAD_VLAN_ID

PDS_SAN_BAD_RADIUS_VALID_CONFIG
ShortDescription : PDS_SAN_BAD_RADIUS_VALID_CONFIG
LongDescription: PDS_SAN_BAD_RADIUS_VALID_CONFIG
Comment: PDS_SAN_BAD_RADIUS_VALID_CONFIG

PDS_SAN_BAD_RADIUS_SECRET_LENGTH
ShortDescription : PDS_SAN_BAD_RADIUS_SECRET_LENGTH
LongDescription: PDS_SAN_BAD_RADIUS_SECRET_LENGTH
Comment: PDS_SAN_BAD_RADIUS_SECRET_LENGTH

PDS_SAN_BAD_REVISION
ShortDescription : PDS_SAN_BAD_REVISION
LongDescription: PDS_SAN_BAD_REVISION
Comment: PDS_SAN_BAD_REVISION

PDS_SAN_BAD_PORT_ADDRESS
ShortDescription : Invalid FC or iSCSI port address.
LongDescription: Invalid FC or iSCSI port address.
Comment: Invalid FC or iSCSI port address.

PDS_SAN_INM_CHANNEL_SUID_INVALID
ShortDescription : PDS_SAN_INM_CHANNEL_SUID_INVALID.
LongDescription: PDS_SAN_INM_CHANNEL_SUID_INVALID.
Comment: PDS_SAN_INM_CHANNEL_SUID_INVALID.

PDS_SAN_INM_CHANNEL_SUID_NOT_FOUND
ShortDescription : PDS_SAN_INM_CHANNEL_SUID_NOT_FOUND.
LongDescription: PDS_SAN_INM_CHANNEL_SUID_NOT_FOUND.
Comment: PDS_SAN_INM_CHANNEL_SUID_NOT_FOUND.

PDS_SAN_INM_CHANNEL_TABLE_FULL
ShortDescription : PDS_SAN_INM_CHANNEL_TABLE_FULL.
LongDescription: PDS_SAN_INM_CHANNEL_TABLE_FULL.
Comment: PDS_SAN_INM_CHANNEL_TABLE_FULL.

PDS_SAN_INM_CHANNEL_HAS_PATHS
ShortDescription : PDS_SAN_INM_CHANNEL_HAS_PATHS.
LongDescription: PDS_SAN_INM_CHANNEL_HAS_PATHS.
Comment: PDS_SAN_INM_CHANNEL_HAS_PATHS.

PDS_SAN_INM_CHANNEL_HAS_SLUNS
ShortDescription : PDS_SAN_INM_CHANNEL_HAS_SLUNS.
LongDescription: PDS_SAN_INM_CHANNEL_HAS_SLUNS.
Comment: PDS_SAN_INM_CHANNEL_HAS_SLUNS.

PDS_SAN_INM_PATH_SUID_INVALID
ShortDescription : PDS_SAN_INM_PATH_SUID_INVALID.
LongDescription: PDS_SAN_INM_PATH_SUID_INVALID.
Comment: PDS_SAN_INM_PATH_SUID_INVALID.

PDS_SAN_INM_PATH_SUID_NOT_FOUND
ShortDescription : PDS_SAN_INM_PATH_SUID_NOT_FOUND.
LongDescription: PDS_SAN_INM_PATH_SUID_NOT_FOUND.
Comment: PDS_SAN_INM_PATH_SUID_NOT_FOUND.

PDS_SAN_INM_PATH_TABLE_FULL
ShortDescription : PDS_SAN_INM_PATH_TABLE_FULL.
LongDescription: PDS_SAN_INM_PATH_TABLE_FULL.
Comment: PDS_SAN_INM_PATH_TABLE_FULL.

PDS_SAN_INM_PATH_PROTOCOL_MISMATCH
ShortDescription : PDS_SAN_INM_PATH_PROTOCOL_MISMATCH.
LongDescription: PDS_SAN_INM_PATH_PROTOCOL_MISMATCH.
Comment: PDS_SAN_INM_PATH_PROTOCOL_MISMATCH.

PDS_SAN_INM_MIRROR_LUN_GUID_INVALID
ShortDescription : PDS_SAN_INM_MIRROR_LUN_GUID_INVALID.
LongDescription: PDS_SAN_INM_MIRROR_LUN_GUID_INVALID.
Comment: PDS_SAN_INM_MIRROR_LUN_GUID_INVALID.

PDS_SAN_INM_MIRROR_IO_TIMEOUT_INVALID
ShortDescription : PDS_SAN_INM_MIRROR_IO_TIMEOUT_INVALID.
LongDescription: PDS_SAN_INM_MIRROR_IO_TIMEOUT_INVALID.
Comment: PDS_SAN_INM_MIRROR_IO_TIMEOUT_INVALID.

PDS_SAN_INM_MIRROR_NOT_CONFIGURED
ShortDescription : PDS_SAN_INM_MIRROR_NOT_CONFIGURED.
LongDescription: PDS_SAN_INM_MIRROR_NOT_CONFIGURED.
Comment: PDS_SAN_INM_MIRROR_NOT_CONFIGURED.

PDS_SAN_INM_PATH_SOURCE_NOT_SUPPORTED
ShortDescription : PDS_SAN_INM_PATH_SOURCE_NOT_SUPPORTED.
LongDescription: PDS_SAN_INM_PATH_SOURCE_NOT_SUPPORTED.
Comment: PDS_SAN_INM_PATH_SOURCE_NOT_SUPPORTED.

PDS_SAN_TOO_MANY_PORTS
ShortDescription : PDS_SAN_TOO_MANY_PORTS.
LongDescription: PDS_SAN_TOO_MANY_PORTS.
Comment: PDS_SAN_TOO_MANY_PORTS.

PDS_SAN_TOO_MANY_SLOTS
ShortDescription : PDS_SAN_TOO_MANY_SLOTS.
LongDescription: PDS_SAN_TOO_MANY_SLOTS.
Comment: PDS_SAN_TOO_MANY_SLOTS.

PDS_SAN_INVALID_HBA
ShortDescription : PDS_SAN_INVALID_HBA.
LongDescription: PDS_SAN_INVALID_HBA.
Comment: PDS_SAN_INVALID_HBA.

PDS_SAN_INVALID_PERSONALITY
ShortDescription : For 100% NAS personality types.
LongDescription: For 100% NAS personality types.
Comment: For 100% NAS personality types.

PDS_SAN_NOT_PROVISIONED
ShortDescription : PDS_SAN_NOT_PROVISIONED.
LongDescription: PDS_SAN_NOT_PROVISIONED.
Comment: PDS_SAN_NOT_PROVISIONED.

PDS_SAN_REPROVISIONED
ShortDescription : PDS_SAN_REPROVISIONED.
LongDescription: PDS_SAN_REPROVISIONED.
Comment: PDS_SAN_REPROVISIONED.

PDS_SAN_REPROVISION_FAILED
ShortDescription : PDS_SAN_REPROVISION_FAILED.
LongDescription: PDS_SAN_REPROVISION_FAILED.
Comment: PDS_SAN_REPROVISION_FAILED.

PDS_SAN_BAD_ISNS_IP_ADDRESS
ShortDescription : PDS_SAN_BAD_ISNS_IP_ADDRESS.
LongDescription: PDS_SAN_BAD_ISNS_IP_ADDRESS.
Comment: PDS_SAN_BAD_ISNS_IP_ADDRESS.

PDS_SAN_BAD_ISNS_PORT
ShortDescription : PDS_SAN_BAD_ISNS_PORT.
LongDescription: PDS_SAN_BAD_ISNS_PORT.
Comment: PDS_SAN_BAD_ISNS_PORT.

FAILED_TO_SEND_JSON_TO_DB
ShortDescription : Failed to send a JSON object to the Maestro database
LongDescription: Failed to send a JSON object to the Maestro database
Comment: Failed to send a JSON object to the Maestro database

MAESTRO_CONNECTION_NOT_CONFIGURED
ShortDescription : Password for Maestro connection can't be changed before it is configured.
LongDescription: You can't reset a password before the Maestro connectionit is configured in Pacman.
Comment: Maestro connection is not configured